Specification
Wires
Safety Cable
Downrod
Coupling Screw x 2
Bolt x 2
Clevis Pin x 2
Nut x 2
Washer x 2
Coupling
Motor Housing
Loosen the screws and washers installed
at top of downrod.
Route safety cable and wires through
downrod. Fix the downrod to the coupling
of motor with bolt, washer, nut and tighten
them firmly then insert clevis pin.
Clamp the downrod with 2 coupling screw
on coupling to prevent shaking during
operaion.
1
Deep box with brace (Figure 5)
5