Specification

Canopy
Canopy Cover
Coupling Cover
2
Loosen the bolts and nuts installed at the downrod,
and save them for further installation(Step 4 & 5).
Assemble the coupling cover,
canopy cover, and the canopy
through downrod.
Install the Mounting Bracket onto outlet box
ceiling with the M4 wood screws and M4
washers.
Wooden Ceiling
Safety Wire
Parts &
Accessories
Motor Assembly x 1
1/4 x50 mm
Wood Screw and Flat x 4
Hex Bolt, Washer, Lock Washer
Nut and Clevis Pin x 2
Pan Bolt, Flat Washer, Lock Washer,
Nut and Clevis Pin x 2
12” Downrod x 1
Mounting Bracket x 1
Canopy x 1
Canopy Cover x 1
Coupling Cover x 1
5
4 X 40 mm outlet
box screws x2
Washer M4 x 2
Parts &
Accessories
Motor Assembly x 1
1/4 x50 mm
Wood Screw and Flat x 4
Hex Bolt, Washer, Lock Washer
Nut and Clevis Pin x 2
Pan Bolt, Flat Washer, Lock Washer,
Nut and Clevis Pin x 2
12” Downrod x 1
Mounting Bracket x 1
Canopy x 1
Canopy Cover x 1
Coupling Cover x 1
5
4 X 40 mm outlet
box screws x2
Washer M4 x 2
Parts &
Accessories
Motor Assembly x 1
1/4 x50 mm
Wood Screw and Flat x 4
Hex Bolt, Washer, Lock Washer
Nut and Clevis Pin x 2
Pan Bolt, Flat Washer, Lock Washer,
Nut and Clevis Pin x 2
12” Downrod x 1
Mounting Bracket x 1
Canopy x 1
Canopy Cover x 1
Coupling Cover x 1
5
4 X 40 mm outlet
box screws x2
Washer M4 x 2
Parts &
Accessories
Motor Assembly x 1
1/4 x50 mm
Wood Screw and Flat x 4
Hex Bolt, Washer, Lock Washer
Nut and Clevis Pin x 2
Pan Bolt, Flat Washer, Lock Washer,
Nut and Clevis Pin x 2
12” Downrod x 1
Mounting Bracket x 1
Canopy x 1
Canopy Cover x 1
Coupling Cover x 1
5
4 X 40 mm outlet
box screws x2
Washer M4 x 2
Install the Mounting Bracket onto wooden
ceiling with the 1/4”x1-31/32” Wood Screws.
3 Mounting bracket installation.
A B
6
13
Installation
Instruction
6
Insert the Bolt into the upper
hole on Downrod and secure
with Flat Washer, Lock Washer
and Nut.
Tighten the 2 bolts.
Important: Bolts must be
tighten till snug.
13
Installation
Instruction
6
Insert the Bolt into the upper
hole on Downrod and secure
with Flat Washer, Lock Washer
and Nut.
Tighten the 2 bolts.
Important: Bolts must be
tighten till snug.
14
Installation
Instruction
Blue (N) Wire
Brown (L) Wire
Green/Yellow (E)
House Supply Wires
7
Connect the wires from fan to
house’s supply wires.
Outlet box Ceiling
Important: Screws and Nuts must be tightened till snug. Safety Wire must install
according to instruction.
9
OUTLET BOX
HANGER
BRACKET
CANOPY
Installation
Instruction
Install the Mounting Bracket onto Outlet Box
-
ceiling with the Screw
Important: Screw must be tightened till
snug. Safety Wire must install according to
instruction.
3A
Drop Roll
9
OUTLET BOX
HANGER
BRACKET
CANOPY
Installation
Instruction
Install the Mounting Bracket onto Outlet Box-
ceiling with the Screw
Important: Screw must be tightened till
snug. Safety Wire must install according to
instruction.
3A
Drop Roll