Specification

Parts &
Accessories
Motor Assembly x 1
1/4 x50 mm
Wood Screw and Flat x 4
Hex Bolt, Washer, Lock Washer
Nut and Clevis Pin x 2
Pan Bolt, Flat Washer, Lock Washer,
Nut and Clevis Pin x 2
12” Downrod x 1
Mounting Bracket x 1
Canopy x 1
Canopy Cover x 1
Coupling Cover x 1
5
4 X 40 mm outlet
box screws x2
Washer M4 x 2
4
5
6
Connect the wires from fan to
house’s supply wires.
7
Insert the Hex Bolt into the upper hole on
Downrod and secure with Flat Washer, Lock
Washer and Nut.
Important: Bolts must be tighten till snug.
Tighten the 2 bolts.
13
Installation
Instruction
6
Insert the Bolt into the upper
hole on Downrod and secure
with Flat Washer, Lock Washer
and Nut.
Tighten the 2 bolts.
Important: Bolts must be
tighten till snug.
13
Installation
Instruction
6
Insert the Bolt into the upper
hole on Downrod and secure
with Flat Washer, Lock Washer
and Nut.
Tighten the 2 bolts.
Important: Bolts must be
tighten till snug.
14
Installation
Instruction
Blue (N) Wire
Brown (L) Wire
Green/Yellow (E)
House Supply Wires
7
Connect the wires from fan to
house’s supply wires.
Install the Hex Bolt, Flat Washer, Lock Washer,
Nut and Clevis Pin into the bottom hole on
top of the Downrod.
Note:
The Hex Bolt, Flat Washer, Lock Washer,
Nut and Clevis Pin are from step 2#.
Black
White