Use and Care Manual

7
MAINTENCE AND CLEANING
WARNING: Parts replacement and troubleshooting to be performed only
by qualified personnel.
WARNING: Do not depend on any switch as the sole means of
disconnecting power when installing or servicing the fan. Failure to do so
may result in fatal electrical shock.
WARNING: Unplug the fan from the wall outlet before servicing or
cleaning.
CAUTION: There is no user maintenance part except regular cleaning as
following description. All other servicing or maintenance should be
performed by qualified service personnel.
To clean the fan, use a soft damp cloth. Wipe down with a dry cloth.
Do not use cleaners that are harmful to paints or plastics.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc.,
which are dangerous and will damage the air circulator.
The propeller, guard, and motor should be cleaned periodically to
prevent overheating, and/or operating in an imbalanced condition.
CAUTION: If cleaning requires the removal of a guard, remove only the
front guard and re-install when finished in its originally installed position.
Do not repair propeller if it becomes damaged. The propeller is
accurately balanced at the factory and should be replaced if damaged.
Do not bend the propeller. The propeller is accurately balanced at the
factory and should be replaced if damaged.
Do not repair propeller if it becomes damaged.
IMPORTANT: Ensure that propeller is replaced in correct direction as
factory installed.
Motor is permanently lubricated.