Operation Manual

iLuv
TM
Stereo Audio System for Your iPod V11M11_IM_EN_10172007
www.i-Luv.com - 12 -
OPERATIONAL INSTRUCTIONS
Setting the Alarm
The Alarm 1 and Alarm 2 functions can only be set while the i166 is in STANDBY mode.
1. While the unit is at STANDBY mode, press and hold ALARM 1 button on the top panel for two (2) sec. and
the hour digit will begin flashing. Press TUNE/SKIP button to set the hour. Press ALARM 1 button to confirm.
2. Minute digit will begin flashing, press TUNE/SKIP button to set the minute. Press ALARM 1 button to confirm.
3. Wake up mode display will begin flashing, press TUNE/SKIP to select the below:
• Wake to FM radio. Pre–tune your desired radio channel in FM radio mode before setting the wake up function.
• Wake to AM radio. Pre–tune your desired radio channel in AM radio mode before setting the wake up function.
• Wake to your iPod.
• Wake to Buzzer.
4. When the wake up mode is selected, press ALARM button again to confirm until the Alarm indicator appear on the display.
Notes: For Radio wake up and iPod playback, the default volume is 10 and will increase to 16 gradually. The volume of buzzer will not change. If the wake
up mode is set to iPod
playback with no iPod connected, it will become the buzzer alarm.
• To set Alarm 2, press and hold the ALARM 2 button and repeat steps 1 to 4 above.
Using the Snooze Function
After Alarm is ON, press SNOOZE button on the top panel or remote control to temporarily deactivate the alarm which will activate again after 9 minutes.
Press either the ALARM1/ALARM2 buttons or the POWER/FUNCTION button to switch off the Alarm.
Using the Sleep Function
Press the SLEEP button on the top panel or remote control, “2:00” and the sleep indication will turn ON. Press the SLEEP button
again to change and select from “2:00” to “1:30”, “1:00”, “0:30”, “0:20”, “0:10”, “0:05” or “OFF”. Selectinig “OFF” disables the sleep
function. While the sleep function is activated, press the SLEEP button once and the remaining sleep time will be shown. Press the
SLEEP button again to select other sleep times.