Network Card User Manual

NOTE

If the end user has a mixture of standard iMcV-Modules as well as Configuration Control

iMcV-Modules, it is important to understand how SNMP and DIP Switches will impact the

cards depending on their capability. Standard iMcV-Modules cannot be upgraded to

Configuration Control capability, so it is strongly recommended to set the DIP Switches on

the modules and then configure them via software to match the same settings.

iView² Management Software

iView² is the IMC Networks management software designed specifically for the IMC

Networks “iMcV” family of modules. It features a

GUI

and gives network managers

the ability to monitor and control the manageable IMC Networks products.

iView² is available in several versions, including WebServer version 3.0, and can also

function as a snap-in module for HP OpenView Network Node Manager and other

third party SNMP Management software. For assistance in selecting the right version

of iView² for your operating system, please visit:

http://www.imcnetworks.com/products/iview2.cfm

iView

supports the following platforms:

•

Windows 2000

•

Windows XP

•

Windows Vista

•

Windows 7

Please see the

SNMP

Management Module installation guide for software

configuration options.

Unmanaged Modules

Before installing the module in an unmanaged chassis, manually configure all of the

desired DIP Switch selectable features. Refer to Tables on page 7 and 8.

Modules must be configured as a HOST-REMOTE pair via DIP Switches. Modules

are shipped in the default setting as a HOST.

HOST: S3-2 OFF

REMOTE: S3-2 ON