ar ar Smart Sprinkler Control I I JE mouppers@imoinza com Eh incimpportinalbmom Ee fart-aies support, sur technical support wil solve the problems for you editor]
What's in the box What's in the box a What you need 3 Remove your old controller 4 Install the New Controller ~ 8 & Your Irrigation System mere 8 Download molar APP <= = meme ccc semen a=§ Add New Devi pg 105 WI-FL Connection Android WI-Fi! Connection WI-Fi Metalwork Indicator Solve Your Network MENUS! WEINBERG FAQ -mm==m=memmeemem mmm 17 FOE =m mm mm mmm mm mm 18 Protection Face plate Smart Sprinkler Controller r 3 Wall Screws with Anchors Power Adapter (Tootles: The Immolate Sprinkler Controller is only d
What you need = in WI-Fi Rareness Smartphone (2.66Hz) or Tablet YA WN raver Hammer Dir lii and Deli Bit Se river (Drywall Natalie) (Dye stalls) Transformer ratings: Input 120V AC 60Hz 28W Output 24Y AC, 1000 mA Controller ratings: Input/Output 24V AC 1000 mA 60Hz | Remove your old controller 1. Test your old controller to ensure that the irrigation system works properly. 2. Take a picture of the current wiring as a reference for installing a new controller. 3.
install the Mew Controller 1. Use perforated label paper to mark the location where you want to Install the smart controller. 2. Drill holes for the anchors at the marked places and use the corresponding bit to drill through the drywall. 3. Use a hammer to tap lightly until each anchor point is in place. 4, Connect sprinkler wires according to the corresponding labels. 5. Install the product according to the fixed position.
Your Ir i nation System 2. 1-8 Zone Wires: Corresponds to your Irrigation Zone, connect sprinkler wires according to the corresponding labels. 3. Master Valve: Master valve wires are often labeled "M,” "MV" or "Pump". Not all systems have a master valve. If you have a master valve, wire it into the "M" terminal, Ignore If not. 4.
Download immolate APP Add New Device 1. Search Immolate App on the Apple App Store or Google Play to download, you can also scan QR code below to download the App. 2. Create an account according to the app prompts. 3, Sign In the Immolate App with your account. Follow the step-by-step process to add and set up your device, the Immolate App will guide you to connect to the device. First, add an address, then confirm your location, and finally scan QR code or enter the device Mac ad dress.
HOS WI-Fi Connection 1. Make sure your controller Is powered on. 2. Open the WI-Fi settings on your phone and find a WI-F network named Immolates JOU to connect. 3. Go back Immolate App to get a list of available networks, tap your WI-Fi router S810 and enter a password, 4. If your Immolate App shows “ending” and the Indicator light flashes blue, it means that your controller has been activated successfully. ELAN Add Controller J mom shes 20) To a Android WI-Fi Connection 1.
WI-Fi Network indicator Connecting WWI-A fPU, PrN a s Sms” Controller activates! successfully Connecting tn Ire ware so: Sy pe Sta nt taring {ois it fishing} Solve Your Network Menus? WI-R caffeine WI-Fleonnection WI-Fi no network or raze wave fall unavailing bia inaction falls Solve WI-Fi network can refer to the following solutions: 1. Check the WI-Fi password is correct. 2. Unplug your device for a few seconds and plug it backing. 3. Power cycle your router, 4. Press the reset button for § seconds.
Manual Watering Water a Specific Zone Press the and (1) arrows to select the desired zone, then press the (4) to begin watering, Start/Pause Watering Press the (1) button, to Start/Pause watering anytime. Stop Watering Press the (x) button to exit the current watering state. Reset to Factory Default Press and hold for around 5 seconds to reset your controller.
FAQ 1. What If | have more than 8 (16) zones? A Our app can supper? milt-device management, so you can buy 2 Immolates smart controllers. 2. What happens If the WI-Fl connection Is lost, for example, the router or network service Is down? A: Your saved schedules will continue to run as programmed, but the controller must be reconnected to access smart features. 3.
FCC Statement This devices complies with part 15 of the FOU Rules. Operation is subject to the following two conditions: {1} This device may not cause harmful interference, and (2) this device must accept any interference received, including Interference that may cause undesired operation.