NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice MARCY DIAMOND OLYMPIC BENCH Hardware Identifier Assembly Instruction MD-8861 Parts List Warranty Ordering Parts Model MD-8861 Retain This Manual for Reference 07-03-08 OWNER'S MANUAL IMPEX® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com info@impex-fitness.
TABLE OF CONTENTS BEFORE YOU BEGIN....................................................................................……….. IMPORTANT SAFETY NOTICE...................................................................……….. HARDWARE PACK……….....….....................................................................……….. ASSEMBLY INSTRUCTIONS.........................................................................……….. EXPLODED DIAGRAM…………………………………………………………………….. PARTS LIST………….…………...............................
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one person at a time should use the machine. 3.
WARNING LABEL REPLACEMENT The Warning Label shown here has been placed on the Left Upright Beam. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Right and Left Upright Beams (#1 & #2) with a Cross Brace (#3) in the mid-span. Secure each end with two M10 x 4 ¾” Carriage Bolts (#54), one 5 ½” x 2” Bracket (#46), two Ø ¾” Washers (#64), and two M10 Aircraft Nuts (#67). B.
STEP 2 (See Diagram 2) A.) Slide the Sliding Block (#6) onto the Main Seat Support (#4). Thread a M18 x ∅ 5/8” Lock Knob (#47) into the selected hole to hold the Sliding Block in position. B.) Attach the Main Seat Support to the Cross Brace (#3). C.) Secure it from the rear of the Cross Brace with two M10 x 2 ¾” Allen Bolts (#58), one 2 ½” x 2” Bracket (#21), and two ∅ ¾” Washers (#64). D.
STEP 3 (See Diagram 3) A.) Attach the brackets at the end of the Backrest Supports (#32) to the pivot on the Sliding Block (#6). Align the holes on the Seat Support (#16) to the brackets on the Backrest Supports. Secure them together with one M12 x 7 5/8” Allen Bolt (#60), two ∅ 1” Washers (#66) and one M12 Aircraft Nut (#69). B.) Attach the Backrest Board (#26) to the Backrest Supports. Secure it with four M8 x 1 5/8” Allen Bolts (#62) and Ø 5/8” Washers (#65).
STEP 4 (See Diagram 4) A.) Insert two M10 x 2 3/8” Carriage Bolts (#56) all the way through the holes on the Leg Developer Holder (#5), then insert the two Bolts through the holes on the Main Seat Support (#4). Attach the Leg Developer Holder to the Main Seat Support. Secure them with the two M10 x 2 3/8” Carriage Bolts, one 4 ¾” x 2” Bracket (#45), two Ø ¾” Washers (#64), and two M10 Aircraft Nuts (#67). Thread a M18 x Ø 5/8” Lock Knob (#47) into the nut on the Leg Developer Holder. B.
STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#28) to the Arm Curl Bracket (#34). Secure it with two M8 x 5/8” Allen Bolts (#61) and Ø 5/8” Washers (#65). Attach the Arm Curl Bracket to the bracket on the Arm Curl Stand (#17). Insert the M8 x 3 ½” Allen Bolt (#63) through the open track on the Arm Curl Stand and the holes on the Arm Curl Bracket then secure the Bolt with two ∅ 5/8” Washers (#65), and one M8 Aircraft Nut (#68). Do not over tighten the Nut and Bolt.
11
PARTS LIST KEY NO.
® IMPEX INC. LIMITED WARRANTY ®" IMPEX Inc. ("IMPEX ) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX.