Owner's Manual

STEP 4 (See Diagram 4)

A.) Do not tighten all Nuts and Bolts in this step until instructed to do so.

B.) Attach the Right Vertical Frame (#5) to the Right Base Frame (#1). Secure it with two M10 x

2 ½” Carriage Bolts (#98), Ø ¾” Washers (#21), and M10 Aircraft Nuts (#18).

C.) Attach the Left Vertical Frame (#6) to the Left Base Frame (#2). Secure it with one M10 x 2

½” Carriage Bolt (#98), Ø ¾” Washer (#21), and M10 Aircraft Nut (#18).

D.) Attach the Rear Vertical Frame (#7) to the Rear Base Frame (#3). Secure it with one M10 x

2 ½” Carriage Bolt (#98), Ø ¾” Washer (#21), and M10 Aircraft Nut (#18).

DIAGRAM 4