Owner's Manual

STEP 13 (See Diagram 13)

A.) Attach the 49” Front Press Cable (#38) to the small opening on the Right Vertical Frame

(#5). Secure the head of the Cable to the small opening with one M10 x 2 3/8” Allen Bolt

(#96), two Ø ¾” Washers (#21), and one M10 Aircraft Nut (#18).

B.) Draw the Cable to the open bracket on the Front Press Base (#29). Install a Small Pulley

(#65) to the bracket.

C.) Draw the Cable around the Small Pulley then back to the opening on the Right Vertical

Frame (#5) then to the open bracket on the Right Base Frame (#1). Install a Pulley to

the bracket with a L-shaped Cable Retainer (#60).

D.) Draw the Cable around the Pulley then upward to the Angled Floating Pulley Bracket

(#31) previously installed in Step-12.

E.) Secure the end of Cable to the Bracket with one M10 x 1” Allen Bolt (#94), two Ø ¾”

Washers (#21), and one M10 Aircraft Nut (#18).

DIAGRAM 13