Operating Instructions REFRIGERATOR/FREEZER COMBINATION Contents Installation, 2-3 GB Positioning and connection Reversible doors English, 1 Description of the appliance, 4 Overall view Start-up and use, 5-6 Starting the appliance Chiller system Using the refrigerator to its full potential Using the freezer to its full potential Maintenance and care, 7 BAN BAN BAN BAN 134 134 144 144 NF NF NF NF (UK) S (UK) (UK) S (UK) Switching the appliance off Cleaning the appliance Avoiding mould and unpleas
Installation GB ! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
Reversible doors Fitting a new plug IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... Green and Yellow - Earth Blue - Neutral Brown - Live GB 1 2 As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: - Connect Green and Yellow wire to terminal marked or coloured Green and Yellow. 'E' or - Connect Brown wire to terminal marked 'L' or coloured red or brown.
Description of the appliance GB Overall view The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages. FREEZER OPERATION Knob LAMP (see Maintenance) SHELVES• REFRIGERATOR OPERATION Knob FRUIT and VEGETABLE bin FREEZER and STORAGE compartment STORAGE compartment• Ice3 ice tray• STORAGE compartment• Levelling FEET Varies by number and/or position.
Start-up and use Starting the appliance Using the refrigerator to its full potential ! Before starting the appliance, follow the installation instructions (see Installation). ! Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. ! The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on.
GB Using the freezer to its full potential The temperature inside the freezer compartment automatically adjusts itself according to the position of the thermostat knob. = warmest = coldest We recommend, however, a medium position. ECO is the optimal temperature for energy saving levels. switches the appliance off, including the refrigerator. Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours).
Maintenance and care Switching the appliance off Replacing the light bulb During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (10W). 1.
Precautions and tips GB ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments; - 2002/96/CE.
Troubleshooting If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list. Malfunctions: Possible causes / Solutions: The internal light does not illuminate. The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The motor does not start. The appliance comes with a motor protection control (see Start-up and use).
Assistance Before calling for Assistance: Check if the malfunction can be solved on your own (see Troubleshooting). If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre model serial number GB Communicating: type of malfunction appliance model (Mod.) serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment. Mod. RG 2330 220 - 240 V- TI 50 Hz Cod.
GB 11
195052765.