Datasheet

Ref. IS.MDUINO.XXX
Switch Configuration
8.1 A Zone: Communications
*Although the Serigraphy of the
Switches will only reference to the
Analog Shields, if a Relay Shield is
connected the IX.6 changes for IX.1
and the IX.5 changes for IX.0. Being
X a value inside of [0..2].
4. SCL/I2.6: Choosing between SCL or the input I2.6. If this switch is ON, it enables the I2.6
input and disables the SCL. If this switch is OFF, it enables SCL and disables I2.6. If it is a Relay
Shield I2.6 is changed for I2.1
3. SDA/I2.5: Choosing between SDA or the input I2.5. If this switch is ON, it enables the I2.5
input and disables the SDA. If this switch is OFF, it enables SDA and disables I2.5. If it is a Relay
Shield I2.5 is changed for I2.0
2. RX1/I1.6: Choosing between RX1 or the input I1.6. If this switch is ON, it enables the I1.6
input and disables the RX1. If this switch is OFF, it enables RX1 and disables I1.6. If it is a Relay
Shield I1.6 is changed for I1.0
1. TX1/I1.5: Choosing between TX1 or the input I1.5. If this switch is ON, it enables the I1.5
input and disables the TX1. If this switch is OFF, it enables TX1 and disables I1.5. If it is a Relay
Shield I1.5 is changed for I1.0
LEFT ZONE
Switch
Analog Shield
Relay Shield
ON
OFF
ON
OFF
D ZONE
SCL/I2.6
I2.6
SCL
I2.1
SCL
SDA/I2.5
I2.5
SDA
I2.0
SDA
C ZONE
RX1/I1.6
I1.6
RX1
I1.1
RX1
TX1/I1.5
I1.5
TX1
I1.0
TX1
B ZONE
Pin 3/I0.6
I0.6
Pin 3
I0.1
Pin 3
Pin 2/I0.5
I0.5
Pin 2
I0.0
Pin 2
uSD & RS-485
D53(SD)
Q2.0
SD
-
SD
FD RS-485 HD
HD
FD
HD
FD