Operation Manual

1-10 Safety — Seats, seat belts and supplemental restraint system
SSS0995
Removal
Use the following procedure to remove the
adjustable headrests.
1. Pull the headrest up to the highest
position.
2. Push and hold the lock knob.
3. Remove the headrest from the seat.
4. Store the headrest properly in a secure
place so it is not loose in the vehicle.
5. Install and properly adjust the headrest
before an occupant uses the seating
position.
SSS0996
Install
1. Align the headrest stalks with the holes
in the seat. Make sure that the head-
rest is facing the correct direction. The
stalk with the adjustment notches
*
1
must be installed in the hole with the
lock knob
*
2
.
2. Push and hold the lock knob and push
the headrest down.
3. Properly adjust the headrest before an
occupant uses the seating position.
SSS1061
ARMREST
Rear armrest
Pull the armrest forward until it is hor-
izontal.