Operation Manual

SDI1949
Checking the tire pressure
1. Remove the valve stem cap from
the tire.
2. Press the pressure gauge
squarely onto the valve stem. Do
not press too hard or force the
valve stem sideways, or air will
escape. If the hissing sound of air
escaping from the tire is heard
while checking the pressure, re-
position the gauge to eliminate
this leakage.
3. Remove the gauge.
4. Read the tire pressure on the
gauge stem and compare it to
the specification shown on the
Tire and Loading Information la-
bel.
5. Add air to the tire as needed. If
too much air is added, press the
core of the valve stem briefly with
the tip of the gauge stem to
release pressure. Recheck the
pressure and add or release air
as needed.
6. Install the valve stem cap.
7. Check the pressure of all other
tires, including the spare.
SIZE
COLD TIRE
INFLATION
PRESSURE
FRONT
ORIGINAL
TIRE
P245/50R18 99V
230 kPa,
33 PSI
245/40R20 95W
230 kPa,
33 PSI
245/40R20 95V
230 kPa,
33 PSI
REAR ORI-
GINAL TIRE
P245/50R18 99V
230 kPa,
33 PSI
245/40R20 95W
230 kPa,
33 PSI
245/40R20 95V
230 kPa,
33 PSI
SPARE TIRE
T165/80R17
420 kPa,
60 PSI
T165/80D17
420 kPa,
60 PSI
T155/80R18
420 kPa,
60 PSI
Maintenance and do-it-yourself 8-37