BR-1001 User Manual Rev.
! Important Safety Instructions 1. Carefully read all of the instructions provided and save them for later use. Read all warnings and instructions marked on the BR-1001. 2. Do not place the BR-1001 on an unstable stand or surface as it may fall resulting in serious damage. 3. The radar antenna should be handled with great care at all time to avoid damaging the antenna radome. Radome damage can result in performance reduction. 4.
1. General The BR-1001 radar can be used to measure the radial velocity of any moving object located in the radar beam coverage. The output of the radar is an analog signal with a frequency and amplitude proportional to the radial velocity and distance of the moving object. 2. Microwave Safety Warning ! Based on limits specified by the Federal Communication Commission (FCC) on Radio Frequency (RF) emissions in a general population environment, continued exposure to radiation should be avoided within 2.
standard power outlet. The radar is interfaced to a Doppler processor a single four-wire cable equipped with military connectors. This cable is used to carry out the radar Doppler signal to the processing unit and the antenna transmission control. You should connect your radar cable from this connector to the appropriate radar input on your processing unit. The radar head has an override transmitter control switch that can be used to activate the transmitter locally at the antenna.
7. Power Connector Specification Connector type: Amphenol T3110-000 Pin 1 2 3 4 Description AC Neutral 115/230Vac (factory set) n/c Protective ground 8. Antenna Connector Specification Connector type: ITT CANNON MS3124E16-8P Pin A B C D E F G H Description Not Connected Not Connected Not Connected Remote Make for Antenna Transmitter Control (+ 5 Vdc Output, 1.5kOhm current limiting resistor) Make return Doppler Signal + (5 Vpp max.) Doppler Signal - (5 Vpp max.
E F Rev.
LIMITED WARRANTY. Infinition Inc. products are warranted against defects in materials and workmanship for a limited period of time from the date Infinition Inc. ships the products to the customer as follows: interface hardware (one (1) year); cables, cable reels, radar antennas and acoustic sensors (ninety (90) days); and software medium (ninety (90) days). All software products sold by Infinition Inc. are licensed to the customer under the terms of the product software license agreement.
