User's Manual

microNode Integration Specification DC and AC Characteristics
On-Ramp Wireless, Inc. 5 014-0033-00 Rev. H
Description Min Typ Max Units
Environmental
Operating Temperature -40 +85
°C
Storage Temp -40 +85
°C
Humidity – non-condensing 5 95 %
Ramp Temperature (maximum rate at which operating
temperature should change)
30
°C/Hr.
MTBF (microNode1) 10.5 MHrs
MTBF (microNode2) 6.4 MHrs
Receiver
Receiver Sensitivity – Note 3 -130 -133 -135 dBm
Receiver Image Reject 38 45 50 dB
Noise Figure 3.5 5.0 6.7 dB
Input IP3 (high LNA gain mode) -11 dBm
Maximum RF input level for specification compliance -20 dBm
General RF Characteristics
Frequency Range – Note 4 2402 ~2482 MHz
Channel Spacing N/A 1.99 N/A MHz
Transmitter
Maximum RF Conducted Power –Note 5
FCC/IC markets:
ETSI markets:
20.0
8.5
20.4
9.5
20.8
10.0
dBm
dBm
Carrier Rejection -35 -40 -50 dBc
Signal Modulation DSSS-
DBPSK
Signal Bandwidth 1.0 MHz
BT Factor 0.3
Peak to Average Ratio 2.3 dB
Spectral bandwidth at maximum RF power:
-6dB BW
-20dB BW
0.96
1.75
MHz
MHz
ACPR – Note 6 -30 dBc
Harmonics – Note 7 -43 dBm
Transmit Power Level Accuracy – Note 8
±1.5
dB
Transmitter Spurious Outputs – Note 9
30MHz to 2400MHz:
2482MHz to 8000MHz:
< -43
< -43
dBm
dBm
VSWR Tolerance
Maximum VSWR for spec compliance – Note 10:
Maximum VSWR for stability.
1.5:1
9:1
NOTES:
1. Tested at 3.6V input, +25C. Please note the following: