User's Manual
Table Of Contents
- Contents
- 1 Overview
- 2 DC and AC Characteristics
- 3 Electrical Interface
- 4 SPI Interface and Sequences
- 5 Power States
- 6 Messaging Protocol
- 7 microNode Provisioning
- 8 Antenna Diversity
- 9 Regulatory Considerations
- 10 Manufacturing Considerations
- 11 Errata
- Appendix A Abbreviations and Terms
- Appendix B PCB Land Pattern and Vias
- Appendix C REACH AND RoHS Compliance
- Appendix D On-Ramp Wireless RMA Process
- Appendix E microNode Mechanical Drawing
microNode Integration Specification DC and AC Characteristics
On-Ramp Wireless, Inc. 8 014-0033-00 Rev. H
Figure 5. RX State Power Consumption (mW Power vs VBATT Input)
Figure 6. microNode1: TX Power Consumption at 20.8 dBm (mW Power vs VBATT Input)
300
310
320
330
340
350
360
370
380
2 2.5 3 3.5 4 4.5 5 5.5
-40C RX
-30C RX
-20C RX
-10C RX
0C RX
10C RX
20C RX
30C RX
40C RX
50C RX
60C RX
70C RX
890
910
930
950
970
990
1010
1030
2 2.5 3 3.5 4 4.5 5 5.5
-40C TX max
-30C TX max
-20C TX max
-10C TX max
0C TX max
10C TX max
20C TX max
30C TX max
40C TX max
50C TX max
60C TX max
70C TX max
80C TX max
85C TX max