User's Manual
Table Of Contents
- Contents
- 1 Overview
- 2 DC and AC Characteristics
- 3 Electrical Interface
- 4 SPI Interface and Sequences
- 5 Power States
- 6 Messaging Protocol
- 7 microNode Provisioning
- 8 Antenna Diversity
- 9 Regulatory Considerations
- 10 Manufacturing Considerations
- 11 Errata
- Appendix A Abbreviations and Terms
- Appendix B PCB Land Pattern and Vias
- Appendix C REACH AND RoHS Compliance
- Appendix D On-Ramp Wireless RMA Process
- Appendix E microNode Mechanical Drawing
On-Ramp Wireless, Inc.
10920 Via Frontera, Suite 200
San Diego, CA 92127
U.S.A.
Copyright © 2015 On-Ramp Wireless, Inc.
All Rights Reserved.
The information disclosed in this document is proprietary to On-Ramp Wireless, Inc. and is not to be used
or disclosed to unauthorized persons without the written consent of On-Ramp Wireless, Inc. The recipient
of this document shall respect the security of this document and maintain the confidentiality of the
information it contains. The master copy of this document is stored in electronic format, therefore any
hard or soft copy used for distribution purposes must be considered as uncontrolled. Reference should
be made to On-Ramp Wireless, Inc. to obtain the latest version. By accepting this material the recipient
agrees that this material and the information contained therein is to be held in confidence and in trust and
will not be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others
without the express written permission of On-Ramp Wireless, Inc.
On-Ramp Wireless, Inc. reserves the right to make changes to the product(s) or information contained
herein without notice. No liability is assumed for any damages arising directly or indirectly by their use or
application. The information provided in this document is provided on an “as is” basis.
This document contains On-Ramp Wireless, Inc. proprietary information and must be shredded when
discarded.
This documentation and the software described in it are copyrighted with all rights reserved. This
documentation and the software may not be copied, except as otherwise provided in your software
license or as expressly permitted in writing by On-Ramp Wireless, Inc.
Any sample code herein is provided for your convenience and has not been tested or designed to work
on any particular system configuration. It is provided “AS IS” and your use of this sample code, whether
as provided or with any modification, is at your own risk. On-Ramp Wireless, Inc. undertakes no liability or
responsibility with respect to the sample code, and disclaims all warranties, express and implied,
including without limitation warranties on merchantability, fitness for a specified purpose, and
infringement. On-Ramp Wireless, Inc. reserves all rights in the sample code, and permits use of this
sample code only for educational and reference purposes.
This technology and technical data may be subject to U.S. and international export, re-export or transfer
(“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited.
RPMA® (Random Phase Multiple Access) is a registered trademark of On-Ramp Wireless, Inc.
Other product and brand names may be trademarks or registered trademarks of their respective owners.
microNode Integration Specification
014-0033-00 Rev. H
April 8, 2015