User's Manual
Table Of Contents
- Contents
- 1 Overview
- 2 DC and AC Characteristics
- 3 Electrical Interface
- 4 SPI Interface and Sequences
- 5 Power States
- 6 Messaging Protocol
- 7 microNode Provisioning
- 8 Antenna Diversity
- 9 Regulatory Considerations
- 10 Manufacturing Considerations
- 11 Errata
- Appendix A Abbreviations and Terms
- Appendix B PCB Land Pattern and Vias
- Appendix C REACH AND RoHS Compliance
- Appendix D On-Ramp Wireless RMA Process
- Appendix E microNode Mechanical Drawing
On-Ramp Wireless, Inc. 37 014-0033-00 Rev. H
7 microNode Provisioning
Provisioning a node consists of updating (if necessary) node firmware version, applying a
configuration to the node, and providing security keys to the node. The node configuration and
security keys must match the target network where the node will be deployed and, after
provisioning, the node-specific key must be provided to the network operator.
The provisioning software package is used to perform these steps. For further information,
please see the provisioning documentation in the Provisioning Guide (0010-0074-00).