User's Manual
Table Of Contents
- Contents
- 1 Overview
- 2 DC and AC Characteristics
- 3 Electrical Interface
- 4 SPI Interface and Sequences
- 5 Power States
- 6 Messaging Protocol
- 7 microNode Provisioning
- 8 Antenna Diversity
- 9 Regulatory Considerations
- 10 Manufacturing Considerations
- 11 Errata
- Appendix A Abbreviations and Terms
- Appendix B PCB Land Pattern and Vias
- Appendix C REACH AND RoHS Compliance
- Appendix D On-Ramp Wireless RMA Process
- Appendix E microNode Mechanical Drawing
microNode Integration Specification Regulatory Considerations
On-Ramp Wireless, Inc. 46 014-0033-00 Rev. H
9.10 RoHS Directive
The microNodes comply with RoHS directive 2002/95/EC. On-Ramp Wireless has received
Certificates of Conformance (CoC) for all components, printed circuit boards, and contract
manufacturers for the microNodes. The RoHS Certification of Conformance is provided in
Appendix C.
9.11 Export Compliance
The microNode complies with the export requirements of the Bureau of Industry and Security
and relevant information is provided below. For details relating to export compliance for the
microNode, refer to the CCATS numbers provided in the following table.
Table 12. ECCN and CCATS Information
microNode Version ECCN CCATS
microNode1 ECCN 5A002a.1 G137225
microNode2 ECCN 5A002a.1 G159589