PID Temperature Controller ITC-100 User Manual Version 2.0s Inkbird Tech. Co., Ltd. Copyright Copyright© 2016 Inkbird Tech. Co., Ltd. All rights reserved. No part of this document may be reproduced without prior written permission. Disclaimer Inkbird has made every effort to ensure that the information contained in this document is accurate and complete; however, the contents of this document are subject to revision without notice. Inkbird to ensure you have the latest version of this document.
IHC-200 User Manual Contents 1. Safety Precautions ................................................................................................ 3 2. Specification ........................................................................................................ 3 Mounting dimension ................................................................................................................ 3 Main Features .........................................................................................
IHC-200 User Manual 1. Safety Precautions Ensure the product using within the specification. Do not touch the terminals at least while power is being supplied. Doing so may occasionally result in injury due to electric shock. Do not allow pieces of metal, wire clippings, or fine metallic shaving or filings from installation to enter the product. Doing so may occasionally result in electric shock, fire, or malfunction. Do not use the product where subject to flammable or explosive gas.
IHC-200 User Manual Units Degree Celsius (<1000ºC) Weight Approx. 140g AC 100-240V ±10% 50/60Hz Power Supply Voltage AC/DC 12-24V ±10% 50/60Hz DC 12-24V ±10% 85~110% Rated voltage Operating voltage range Approx. 5VA(100~240VAC) Approx. 4VA(12~24VAC) Power Consumption Approx. 3W(12~24VDC) Display Character PV: 4 digital 9.9mm height Red LED Letters SV: 4 digital 8mm height Green LED Letters Display Accuracy ±0.2%FS 0.1ºC(<1000ºC);1ºC(≥1000ºC) Period of Sampling 0.
IHC-200 User Manual 3. Connection 3.1 Dimension (unit: mm) Shell Mounting bracket Panel Cutout Push the instrument into the hole of panel and insert mounting bracket from back side, ensure that there are no gaps between the panel and mounting bracket, and then screw cap down. Ensure that the ambient temperature should not be exceed the specified working temperature, especially when installed more than two instruments. 3.2 Connection 4. Front Panel and Operation Inkbird Tech. Co., Ltd. www.
IHC-200 User Manual ① PV: Process Value Measured Value/Mode Value ② SV: Setting Value. Set Value/ Mode Context Value ③ Status Display LED OUT:Output pilot lamp AL1:Alarm1 pilot lamp AL2:Alarm2 pilot lamp RUN:Manual pilot lamp ④ Up Key: Increase the value in setting, Keep pressing can increase value quick. ⑤ Down Key: Decrease the value in setting, Keep pressing can increase value quick.
IHC-200 User Manual 5.2 Alarm Function Setting(Table 2) Alarm Output AL1 Output AL2 Output Alarm Type ALP Value Upper Alarm Limit 0 Lower Alarm Limit 0 Maximum Deviation Alarm 0 Minimum Deviation Alarm 0 Upper Alarm Limit 1 Lower Alarm Limit 2 Maximum Deviation Alarm 4 Minimum Deviation Alarm 8 5.
IHC-200 User Manual displays “AT” alternately (Character: ), the instrument is in self-adjusting status. In this status, the instrument will execute position adjustment by 2 - 5 times oscillations, then it will turn out PID control parameter automatically (M50, P and T parameter). The instrument will return to PID automatic control status at the end of selfadjustment.
IHC-200 User Manual diP diL diH Decimal Point 0~3 Position Input Lower Limit Value Input Upper Limit Value 1 -1999~+9999 1 Digital 0 -1999~+9999 1 Digital 1000 SC Sensor Calibration -199~+999 0 oP1 Output Mode 0/2:Time Duty 0 1:0-10mA Opl Output Lower Limit 0~220 1% 0 Oph Output Upper Limit 0~220 1% 100 ALP Alarm Function 0~31 CF System Function 2: Heater Table 2 0 2 3:Cooler Addr Address 0~63 1 Baud Baud Rate 0~4800 9600 dl Input Digital Filter 0~20 run Run
IHC-200 User Manual Loc=2,40,808,all of parameters can be revamped. 8. Technical Assistance and Warranty 8.1 Technical Assistance If you have any problems installing or using this thermostat, please carefully and thoroughly review the instruction manual. If you require assistance, please write us to cs@ink-bird.com. We will reply your emails in 24 hours from Monday through Saturday. You can also visit our web site www.ink-bird.com to find the answers of the common technical questions. 8.