Installation Manual

InnoSenT sets standards – worldwide
Page 2 Version 1.0 USER MANUAL IPM-224_F
Oscillator
transmit frequencies f
FCC
24.075 24.175 GHz IPM-224_F
temperature dri (frequency) Δf -1 MHz/°C
output power (EIRP) P
out
6 11 20 dBm @ 25°C
Receiver
IF-output voltage oset 1.0 2.2 4.0 V
IF-amplier bandwidth DC - 10k Hz
gain 20 dB
signal level S 29 mV @ InnoSenT test setup
noise level R 5 7 mV @ InnoSenT test setup
S/N rao S/N 6 @ InnoSenT test setup
ESD stability 12 kV
according to
DIN EN 6100-4-2
Antenna paern
full beam width @ -3dB horizontal 70 ° azimuth
vercal 70 ° elevaon
full beam width @ -10dB horizontal 135 ° azimuth
vercal 135 ° elevaon
side-lobe suppression horizontal 10 dB azimuth
vertical 10 dB elevaon
Power supply
supply voltage V
CC
4.75 5.0 5.25 V
supply current I
CC
35 40 mA IF-amp included
Environment
operang temperature T
OP
0 +23 +60 °C
Mechanical Outlines
outline dimensions
height
length
width
6.8
40.0
23.5
mm
Electrical Characteriscs
Parameter Symbol Min. Typ. Max. Units Comment
CONFIDENTIAL AND PROPRIETARY
The informaon contained in this document shall remain the sole and exclusive property
of InnoSenT GmbH and shall not be disclosed by the recipient to third pares without prior
consent of InnoSenT in wring.