Manual

Innotech Device Network Cabling Installation Instructions

Edition 3.0 dated 05.12.2013

Page 28

Sub Network Devices

The Innotech Sub Networks are both two wire networks.

These comprise of the REM network and the Sub System Network.

The REM network is a Remote Expansion Module Network. Providing remote I/O expansion devices

controlled via a Genesis controller. This network is a 38.4K baud network.

The Sub System Network is a network of small point devices such as VAVMax, MiniMAX and MIcroMAX.

This network is a 115K baud network.

Below are some general rules for connection for all Sub Network Devices.

• Every Sub System Network device has a so earth connection

• Every REM network device has a so earth connection

• Every REM must have an earth connected

• All Repeaters, VAV Maxims or Mini Maxims must have the 0V of the power supply earthed

• Always fit End Of Line Terminators (EOL) on both ends of each network section

3-1 REM Network

There are seventeen devices that exist on the REM network. These are listed below:

Part Number

Comms

Terminals

Screen Type Description

GENII RMI

So Earth Remote Module Interface

IR11

So Earth to power

supply 0V terminal

Repeater single channel (auto detect dual

baud)

GENII DI REM

So Earth Digital Input REM

GENII IDI REM

So Earth Isolated Digital Input REM

GENII DO REM

So Earth Digital Output REM

Table 3-1: REM Network Controllers and Devices