User Manual

MEASURE OF SUCCESS
USER INSTRUCTIONS
Programmable
2-wire Transmitter
for Pt100 and Pt1000 Input
The user instruction must be read prior to adjustment and/or installation.
All information subject to change without notice.
© INOR 10/2021 - 4008101002 - MA APAQ C130 RTD R02 en
GENERAL INFORMATION
APAQ C130
RTD
is a low cost, non-isolated, easy-to-use 2-wire
temperature transmitter for Pt100 and Pt1000 input, intended to be
used in industrial environment.
The transmitter is configured from a mobile device via NFC
communication, by using the app INOR Connect. Inor Connect is
available for free download on App Store, Google Play Store and
Huawei AppGallery.
C130
RTD
MEASURE OF SUCCESS
DATA (short form)
CONFIGURATION
Input 2-, 3-, 4-wire connection
Pt100 (IEC 60751,
α =0.00385) -200 to +850 °C / -328 to +1562 °F
Pt1000 (IEC 60751, α =0.00385) -200 to +850 °C / -328 to +1562 °F
Adjustments - Zero Any value within range limits
Adjustments - Minimum span 20 °C / 36 °F
Output
4-20 mA, temperature linear
Sensor failure indication Upscale (≥21.0 mA) or downscale (≤3.6 mA)
NAMUR Compliance
Current limitations and failure currents acc.
to NAMUR NE 43
Response time 0.4 to 26 s, adjustable ltering level
Ambient temperature
Storage and operation -40 to +85 °C / -40 to +185 °F
Galvanic isolation None
Power supply 6 to 32 VDC
Accuracy
Max. of ±0,15 K or ±0,15 % of span
Mounting DIN B-head or larger
Vibration IEC 60068-2-6,10 g
EMC EN 61326-1 and EN 61326-2-3
Conguration App INOR Connect via NFC
Factory settings
Input Pt100 3W, 0 to 100 °C
Output 4 to 20 mA
Sensor error indication Upscale
This product should not be mixed with other kind of scrap, after usage.
It should be handled as an electronic/electric device.
www.inor.com, www.inor.se
INOR Process AB, PO Box 9125, SE-200 39 Malmö, Sweden,
Phone: [phone], Fax: [phone], E-mail: [e-mail]
INOR Transmitter OY, Unikkotie 13, FI-01300 Vantaa, Finland,
Phone:[phone], Fax: [phone], E-mail: myynti@inor.
INOR Transmitter GmbH, Am See 24, D-47279 Duisburg, Germany,
Phone: [phone], Fax: [phone], E-mail: [e-mail]
KROHNE Temperature Division INOR, 55 Cherry Hill Drive,
Beverly, MA 01915, United States
Phone: [phone], Fax: [phone], E-mail: [e-mail]
Before making a configuration of APAQ C130
RTD
you need to
do following:
1. Make sure that you have a mobile device with NFC
communication activated
2. Download the app INOR Connect to your mobile device
Android
Android 4.4 or later
4. Once you have set the desired values in the
app, you transfer it to the transmitter by
clicking the transfer button and holding the
mobile device against the transmitter
until a green check box appears conrming
that the transfer has been completed.
Required versions:
iOS
iOS 13 or later and
Iphone 7 or later for NFC
Conguration procedure:
1. Launch the app by clicking on the App
icon or holding your mobile device
against the transmitter on the part of the
device where NFC is lo
cated
(only possible wi
th Androi
d).
2. Click
on “R
ead Confi
guration” and hold
your mobile device against the trans-
mitter as explained in the rst section.
3. In the app you can edit the following:
a. Sensor type and number of wires
b. Measuring range
c. Upscale or downscale
Sensor error indication
d. Filter level
e. TAG-number
f. Password