Specifications

February 18, 2020

Page 18/26

Document Ref: isp_ble_DS1807_R9.docx

Insight SiP

– Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France –

www.insightsip.com

The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission.

Specification subject to change without notice.

BLE MODULE

ISP1807

6. Packaging & Ordering information

6.1. Marking

ISP1807

Part Number

2 letters Module Type (see

section 6.5)

2 digits year number

2 digits week number

1 letter Hardware revision

6.2. Prototype Packaging

For engineering samples and prototype quantities

up to 99 units, deliveries are provided in thermoformed

trays or cut tapes.

They are delivered in sealed pack with desiccant

pack and humidity sensors. Please see section 7.2

for more information on moisture sensitivity.

Please order with “ST” code packaging suffix.

6.3. Jedec Trays

For pre-production volumes, ISP1807 are available in Jedec trays. They are delivered in sealed pack

with desiccant pack and humidity sensors. These Jedec trays are also suitable for further baking. Please

see section 7.2 for more information on moisture sensitivity. Please order with “JT” code packaging

suffix.

Refer to tray sizes below. Complete information on Jedec trays is available on request.