Specifications

February 18, 2020
Page 26/26
Document Ref: isp_ble_DS1807_R9.docx
Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com
The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission.
Specification subject to change without notice.
BLE MODULE
ISP1807
8.8. Disclaimer
Insight SiP’s products are designed and manufactured for general consumer applications, so testing and
use of the product shall be conducted at customer’s own risk and responsibility. Please conduct
validation and verification and sufficient reliability evaluation of the products in actual condition of
mounting and operating environment before commercial shipment of the equipment. Please also pay
attention (i) to apply soldering method that don’t deteriorate reliability, (ii) to minimize any mechanical
vibration, shock, exposure to any static electricity, (iii) not to overstress the product during and after the
soldering process.
The products are not designed for use in any application which requires especially high reliability where
malfunction of these products can reasonably be expected to result in personal injury or damage to the
third party's life, body or property, including and not limited to (i) aircraft equipment, (ii) aerospace
equipment, (iii) undersea equipment, (iv) power plant control equipment, (v) medical equipment,
(vi) transportation equipment, (vii) traffic signal equipment, (viii) disaster prevention / crime prevention
equipment.
The only warranty that Insight SiP provides regarding the products is its conformance to specifications
provided in datasheets. Insight SiP hereby disclaims all other warranties regarding the products, express
or implied, including without limitation any warranty of fitness for a particular purpose, that they are
defect-free, or against infringement of intellectual property rights. Insight SiP customers agree to
indemnify and defend Insight SiP against all claims, damages, costs and expenses that may be incurred,
including without any limitation, attorney fees and costs, due to the use of products.