Quick Start Guide

Glass door
Leveling feet
Steel barShelf
PACKAGE CONTENTS
• 48-Can Beer and Beverage Cooler
• Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
FEATURES
• 48-can capacity
• Temperature range from 34° to 50° F (1° to 10° C)
• Touch controls and LED display
• Interior white LED light
• Reversible door
• Removable shelf
Control panel/display
QUICK SETUP GUIDE
48-Can Beer and
Beverage Cooler
NS-BC48SS7
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter your model in the search box,
then press ENTER. Next to Features, click Support & Downloads, then
next to User Guide, click the language you want.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this appliance near water.
6 Clean only with a damp cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t
into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the appliance.
11 Do not attempt to modify or extend the power cord of this appliance.
12 Unplug this appliance during lightning storms or when it will not be used for long periods of time.
13 Make sure that the available AC power matches the voltage requirements of this appliance.
14 Do not handle the plug with wet hands. This could result in an electric shock.
15 Unplug the power cord by holding the plug, never by pulling the cord.
16 Do not turn the appliance on or o by plugging or unplugging the power cord.
17 Turn o the appliance before unplugging it.
18 Refer all servicing to qualied service personnel. Servicing is required when the appliance has been
damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not
operate normally, or has been dropped.
19 To reduce the risk of re or electric shock, do not expose this appliance to rain, moisture, dripping, or
splashing, and no objects lled with liquids should be placed on top of it.
Grounding requirement
This cooler must be grounded. This cooler is equipped with a cord having a grounding wire with a
grounding plug. The plug must be inserted into an outlet that is properly installed and grounded.
Improper use of the grounding plug can result in a risk of electric shock. Consult a qualied electrician or
service person if the grounding instructions are not completely understood, or if doubt exists as to whether
the cooler is properly grounded.
SETTING UP YOUR COOLER
Before using your cooler
• Remove the exterior and interior packing.
• Let your cooler stand upright for approximately a half hour before connecting it to power to
reduce the possibility of a cooling system malfunction.
• Clean the inside with lukewarm water using a soft cloth.
Find a suitable location
DO
• Place your cooler on a oor, countertop, or cabinet that is strong enough to support it when
it is fully loaded.
• Allow 1.6 inches (4 cm) of space on all sides of your cooler to allow for correct air ventilation.
• Place your cooler away from direct sunlight and sources of heat (stove, heater, or radiator).
Direct sunlight may aect the acrylic coating and heat sources may increase electrical
consumption. Room temperature below 50°F (10°C) or above 85°F (29.4°C) hinders the
performance.
DON’T
• Recess or build it in. Your cooler is designed to be free standing only.
• Place your cooler in moist areas.
• Use your cooler in a garage or any other outside installation.
Level your cooler
If your cooler is not level, the door may not close or seal correctly, causing cooling, frost, or
moisture problems.
• To level your cooler, raise or lower the leveling foot by turning it clockwise or counter-
clockwise.
Connect to power
• Plug in and run your cooler for two to three hours before making any temperature
adjustments and before adding beverages. This allows your cooler to reach a stable
temperature.
Note: Check your local power source. Your cooler requires a 110 V ~ 120 V, 60 Hz power supply.
Use a receptacle that accepts the grounding prong. The power cord is equipped with a 3-prong
(grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from your cooler.
Standby Light Display Temperature +/-