User Manual

10
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
www.insigniaproducts.com
Finding a suitable location
• This kegerator/beverage cooler is designed to be free standing only,
and should not be recessed or built-in.
• Place your kegerator/beverage cooler on a floor that is strong enough
to support the kegerator/beverage cooler when it is fully loaded.
• Allow three inches of space between the back and sides of the
kegerator/beverage cooler and any surrounding walls. This allows for
proper air ventilation. If you install the casters, lock them. If not, adjust
the leveling feet to keep the kegerator/beverage cooler level.
• Locate the kegerator/beverage cooler away from direct sunlight and
sources of heat (stove, heater, radiator, and so on). Direct sunlight may
affect the acrylic coating and heat sources may increase electrical
consumption. Ambient temperature below 50°F (10°C) or above 85°F
(29.4°C) will hinder the performance of this kegerator/beverage cooler.
This kegerator/beverage cooler is not designed for use in a garage or
any other outside installation.
• Avoid locating the kegerator/beverage cooler in moist areas.
Providing a proper power supply
Check your local power source. This kegerator/beverage cooler requires a
110V-120V, 60 Hz power supply.
Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug that mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric
shock hazard from this kegerator/beverage cooler.
3-prong receptacle
Receptacle box cover
3-prong plug
Grounding lead
Grounding adapter Receptacle box cover
Screw
Receptacle
Using a 3-prong plug and outlet Using a grounding adapter