Quick Start Guide

QUICK SETUP GUIDE

SSD Mount

NS-PCSSDM7 /

NS-PCSSDM7-C

The NS-PCSSDM7 / NS-PCSSDM7-C SSD mounting

bracket lets you install an SSD drive into a 3.5-inch drive

bay in a desktop PC.

PACKAGE CONTENTS

• SSD drive bracket

• Screws (8)

• Quick Setup Guide

YOU'LL NEED

• Phillips screwdriver

Flat size (W×H): 7.08 x 3.54 in (179.83 × 89.92 mm.)

Final folded size: 2.36 x 3.54 in (59.94 × 89.92 mm.)

Before using your new product,

please read these instructions to prevent any damage.

INSTALLING THE SSD DRIVE

IN THE DRIVE BRACKET

Note: We recommend that you use an anti-static bracelet

to protect the data on the SSD drive.

1 Place your mounting bracket on a at surface

with the sides facing up.

2 Place the SSD drive (not included) on your

bracket. Make sure that the screw holes on the

bottom of the SSD drive align with the holes on

the bottom of your bracket.

SSD drive

NS-PCSSDM7__NS-PCSSDM7-C_17-0698_QSG_V2_EN.ai 1 9/1/2017 10:18:10 AMNS-PCSSDM7__NS-PCSSDM7-C_17-0698_QSG_V2_EN.ai 1 9/1/2017 10:18:10 AM

PAGE 1
NS-PCSSDM7__NS-PCSSDM7-C_17-0698_QSG_V2_EN.ai 1 9/1/2017 10:18:10 AM The NS-PCSSDM7 / NS-PCSSDM7-C SSD mounting bracket lets you install an SSD drive into a 3.5-inch drive bay in a desktop PC. QUICK SETUP GUIDE SSD Mount NS-PCSSDM7 / NS-PCSSDM7-C PACKAGE CONTENTS • SSD drive bracket • Screws (8) • Quick Setup Guide YOU'LL NEED Flat size (W×H): 7.08 x 3.54 in (179.83 × 89.92 mm.) Final folded size: 2.36 x 3.54 in (59.94 × 89.92 mm.
PAGE 2
NS-PCSSDM7__NS-PCSSDM7-C_17-0698_QSG_V2_EN.ai 2 9/1/2017 10:18:10 AM 3 Carefully turn the bracket and drive over. 4 Insert four screws through the holes on the bottom of your bracket and into the holes in the drive, then use a Phillips screwdriver to tighten the screws. SPECIFICATIONS Dimensions (L × W × H): 3.9 × 4.0 × 0.46 in. (100 × 101.5 × 11.6 mm) ONE-YEAR LIMITED WARRANTY Visit www.insigniaproducts.com for details. CONTACT INSIGNIA: For customer service, call 1-877-467-4289 www.insigniaproducts.