Instructions / Assembly

(5)
(5)
(6)
(4)
(4)
(A)
(B)
(E)
(D)
STEP 1: Attach Divider (4) to Bottom Panel (5) using two Flat Washers (D), two Lock Washers (E) and two Long Bolts (A).
FULLY TIGHTEN LONG BOLTS (A).
STEP 2: Attach Divider (4) and Bottom Panel (5) to Back Panel (6) using three Bolts (B). FULLY TIGHTEN BOLTS (B).
ÉTAPE 1: Fixez le séparateur (4) au panneau inférieur (5) à l’aide de deux rondelles plates (D), deux rondelles de blocage (E)
et deux boulons longues (A). SERREZ TOUTES LES BOULON LONGUES (A).
ÉTAPE 2: Fixez le séparateur (4) et le panneau intérieur (5) au Panneau arrière (6) en utilisant trois boulons (B).
SERREZ TOUTES LES BOULONS (B).