INSTABILITY MATERIAL SAFETY DATA SHEET Instabind™ Safety Edge Binding Style Instabind™, by Bond Products™, is a truly miraculous solution 1o rug finishing. Now, you can finish your carpet on-site and bind around mountainside comers and circles with ease.
1A INSTABILITY IDENTIFICATION a. 413-20 Adhesive transfer tape b. Scrim reinforced, double-sided tape . PHYSICAL DATA a Solubility in water: Negligible b, Volatility at 100° C: Less than 0.1% . HAZARDOUS INGREDIENTS a. None V. FIRE AND EXPLOSION HAZARD DATA a. Flash point: N/A b. Flammable limits: N/A c. Extinguishing media: Water, dry chemicals, foam, CO, d. Unusual fire hazards:Produces dense black smoke if boomed V. HEALTH HAZARD DATA a.
2B INSTABILITY POLY TAPE MADS SHEET I IDENTIFICATION a. 100% Polyester H. HAZARDOUS INGREDIENTS Chemical name CAS Number % a. Acetic Acid 64-19-7 1 b. Propagandist N/A 0.1 ¢. Caustic (Sodium hydroxide) 1310-73-2 1 d. Thereabout 62-56-6 0.1 e. Monocotyledon Ether N/A 0.1 f. Formaldehyde 50-00-0 0.1 Hl. PHYSICAL DATA a. Form and color: Fabric b. Specific Gravity: 1.34 ©. Malting point: Approx. 480° F d. Boiling point: N/A &, Solubility in water: N/A V. FIRE AND EXPLOSION HAZARD DATA a. Ordinary combustible b.
3C INSTABILITY GLUE MDSE SHEET . IDENTIFICATION a. Product Name: L72-2034 b. Product description: Diner acid based poly amide resin ¢. Poly amide resin d. CAIRN: 68139-80-0 . COMPOSITION INFO a. This product doesn't contain any hazardous chemical as defined by the ZOSMA Hazard Communication Standard (29 CFR 1910.1200 . HAZARDS IDENTIFICATION a. Static electricity may be created when handling b. Use proper grounding methods when using near flammable or explosive materials c. Melted resins will cause buns d.
4D INSTAR IN POLYESTER WADDING MADS SHEET . IDENTIFICATION a. 8/32° Perplex F2 il. PHYSICAL DATA a. Polyester yarn b. Ply bleached wadding . MANUFACTURING PROCESS a. Wadding braided together b. Secured by polyester yam ¢. Ends welded and secured by plastic plug V. SAFETY a. Non-hazardous b. Non-reactive ¢. Use water, dry chemicals, or dry powder o put out any fires Date of issue: March 21, 2013 Prepared by: Brian Milne President Bond Products, Inc.