Datasheet

INSYS Modem 336/56k 4.1 (UL) Functions
5.9.4 Start of the remote configuration at the local modem
Dial the remote modem, e.g. an INSYS modem
The modem will establish a successful connection
Switch to the mode “Remote Configuration”
Prompt for entering the password
Enter password (default)
If the entry was successful, the remote modem will send
the input prompt
ATD <Phonenumber>
Connect…
QWERTY
>
****
Remote Access
Remote Password:
5.9.5 Reduced command set
ATA ATD
ATO AT/B
AT&F
Some commands may not be executed during
remote configuration
ERROR
and will result in a response
5.9.6 Terminate the remote configuration process
Before you complete the remote configuration, save all settings
in the profiles 0 or 1.
Several commands may be used for termination.
Return to online mode without software reset
AT&W0 AT&W1
ATZ0 ATZ1
AT*E AT*X
Software reset with interruption of all connections
The modem loads the user configuration 0 or 1.
July 06 33