Datasheet

Notes Regarding the Use of the Manual INSYS Modem 336/56k 4.1 (UL)
3 Notes Regarding the Use of the Manual
¾ This manual uses the symbol for especially important notes. Further notes
will be marked accordingly.
¾ All factory settings are marked “default”.
Example (Chap. 5.7.3): Enter old password (default: QWERTY)
¾ In Chapters 4 to 6 the description consists of two columns. Individual func-
tions are described on the left side. The according AT commands and the mo-
dem responses can be found in the right column.
Function description AT command
Example (Chap. 5.2.7):
After the hardware reset, load the user profile 1 ATZ1
¾ All AT commands start with the letters AT and end with a “Return” (Carriage
Return - CR). AT commands can be entered in capital or small letters. The
command is evaluated as soon as the modem received a return.
¾ In the following, the used syntax is explained:
c ATDT AT command (font: Courier, bold)
d <Term> Input of a parameter (font: Courier, bold)
e [Term] Input of an optional parameter (font: Courier, bold)
f Term Response from the modem (font: italic)
Examples:
cATDT<n> Dialing the phone number <n>
ATDT1234 Dialing the phone number 1234
d+e AT+MS=<Modulation>, [Automode] Select modulation type
AT+MS=V92 Select modulation type
V.92
AT+MS=V92,1 Select modulation type
V.92 with automatic
adjustment
f Connect Connection to the remote terminal has been
established.
> Input prompt during the remote configuration.
8 July 06