Installation Guide

Need help with installation? www.homedepot.com/services/pergola-installation/
STEP 12: SIDE CORNERS
Components Needed
 Corner angles (L)
 Sealant tub & gun
 #10 x 3/8” sheet metal screw
Tools Recommended
FIRST: Place each corner angle (L) flush to
front/side fascia bottom covering the seam.
SECOND: Mark desired height of each
corner angle (L) and cut with tin snips or
metal saw.
THIRD. Attach the corner angles (L) to the
front and side fascia using the socket drive
and four #8 x 5/8” tek screws.
Seal seams generously.