AV Receiver Instruction Manual

First Time Setup

—Continued

If you connect an -capable Integra MiniDisc

recorder, CD recorder, or next generation HDD-compat-

ible component to the TAPE IN/OUT or VIDEO 3 IN

jacks, for to work properly, you must change this

setting.

This setting can only be changed on the AV receiver.

Note:

HDD can be selected for the Tape input selector or

Video 3 input selector, but not both at the same time.

Changing the Input Display

Press the [Tape] or [Video 3]

input selector button so that

“TAPE” or “VIDEO3” appears on

the display.

Press and hold down the [Tape]

or [Video 3] input selector button

(about 3 seconds) to change the

setting.

Repeat this step to select MD, CDR, or

HDD.

For the Tape input selector, the setting

changes in this order:

For the Video 3 input selector, the set-

ting changes in this order:

VIDEO 3

↔

HDD

1, 21, 2

→ TAPE → MD → CDR → HDD

DTR-4.6.book Page 41 Thursday, September 22, 2005 1:45 PM