AV Receiver Instruction Manual

53
Using the Listening Modes—Continued
The following table shows which listening modes can be used with each input signal format.
Source format
Listening mode
Analog, PCM
*1
*1. In the Direct listening mode, 32 kHz, 44.1 kHz, and 48 kHz PCM is processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. In listening modes
other than Direct and Stereo, 96 kHz PCM is processed at 48 kHz.
Dolby Digital
DTS/DTS 96/24
*2
*2. In listening modes other than Direct, Stereo, and DTS 96/24, DTS 96/24 sources are processed as normal DTS.
Multich analog
3/2.1
2/2.1
2/0 1/0, 1+1 Other
3/2.1
2/2.1
2/0
CD, TV, radio,
cassette, etc.
DVD, DTV, etc. DVD, CD, etc. DVD
Direct
Stereo
✔ ✔✔✔✔✔✔ ✔
Mono
✔ ✔✔✔✔✔✔
Multich
✔
PLII Movie/Music/Game
Neo:6 Cinema
Neo:6 Music
*3
*3. Available only when surround speakers are connected.
✔✔ ✔
Dolby D
✔✔
DTS, DTS 96/24
✔
Onkyo
Original
DSP
Mono Movie
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo
Full Mono
✔ ✔✔✔✔✔✔
*3
Tip: To check the format of the digital input signal, see “Displaying Source Information” on page 51.
4_Basic_En Page 53 Thursday, September 22, 2005 3:47 PM