A/V Receiver Instruction Manual

ManualsBrandsIntegra ManualsStereo ReceiverDTR-7

Using the remote controller

Controlling an Onkyo/Integra MD recorder

Note:

Make sure that you point the transmission part on the remote con-

troller toward the sensor area on the MD recorder.

1. Press the MODE MD/AUX button.

2. Press the desired MD operation button.

Turning the power on and off to the MD recorder

POWER ON/STNBY

: Turning on or standby the power to the MD

recorder

: Down

:Up

: Playback

: Stop

: Rewind

: Fast forward

REC o : Record

: Pause

EJECT r : Eject

1~9, +10 : Numeric keys

ENT : Confirm

You may also use the following buttons:

VOL ∆/∇ : Adjusting the volume level of the receiver

MUTING : Muting the sound from the receiver

Controlling an Onkyo/Integra tape deck

Note:

First connect an Onkyo/Integra tape deck using the zconnection.

(See page 7.)

1. Press the MODE AUDIO/TAPE button.

2. Press the desired tape deck operation button.

: Playback

: Stop

: Rewind

: Fast forward

REC o : Recording/pause

: Reverse playback

You may also use the following buttons:

VOL ∆/∇ : Adjusting the volume level of the receiver

MUTING : Muting the sound from the receiver

MODE MD

operation

buttons

Numeric keys,

ENT button

MODE

AUDIO/TAPE

TAPE

operation

buttons

MODE SAT,

CABLE,VCR,

MODE SAT, CABLE, VCR, and TV buttons

No preset codes are programmed into the MODE SAT, CABLE,

VCR, and TV buttons. You can use these buttons to program remote

controller signals of other devices. (See page 52.)

You may use the following buttons:

VOL ∆/∇ : Adjusting the volume level of the receiver

MUTING : Muting the sound from the receiver