Datasheet

32 Datasheet
Intel
®
Celeron
®
Processor up to 1.10 GHz
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all Celeron processor frequencies.
2. Parameter measured at 14 mA (for use with TTL inputs) for S.E.P Package and PPGA Package. It is 9 mA
for FC-PGA/FC-PGA2 packages.
3. (0 ≤ V
IN ≤ 2.5 V +5%) for PPGA package and S.E.P package only.
4. (0 ≤ V
OUT ≤ 2.5 V +5%) for PPGA package and S.E.P package only.
5. (0≤ V
IN ≤ 1.5V +3%) for FC-PGA/FC-PGA2 packages only.
6. (0≤ V
OUT ≤ 1.5V +3%) for FC-PGA/FC-PGA2 packages only.
7. Applies to non-AGTL+ signals BCLK, PICCLK, and PWRGOOD for FC-PGA/FC-PGA2 Packages only.
8. Applies to non-AGTL+ signals except BCLK, PICCLK, and PWRGOOD for FC-PGA/FC-PGA2 packages
only.
9. These values are specified at the processor pins for FC-PGA/FC-PGA2 packages only.
10.S.E.P. package and PPGA package only.
Table 7. Non-AGTL+ Signal Group DC Specifications
Symbol Parameter Min Max Unit Notes
V
IL
Input Low Voltage –0.3 0.7 V 10
V
IH
Input High Voltage 1.7 2.625 V
2.5 V +5% maximum,
Note 10
V
IL1.5
Input Low Voltage –0.150 VREF - 0.200 V 8, 9
V
IL2.5
Input Low Voltage -0.58 0.700 V 7, 9
V
IH1.5
Input High Voltage VREF + 0.200 VTT V5, 8, 9
V
IH2.5
Input High Voltage 2.0 3.18 V 7, 9
V
OL
Output Low Voltage 0.4 V 2
V
OH
Output High Voltage
• S.E.P.P and PPGA N/A 2.625 V
All outputs are open-
drain to 2.5 V +5%
•FC-PGA/FC-PGA2 V
TT V6, 8, 9
I
OL
Output Low Current
• S.E.P.P and PPGA 14 mA
• FC-PGA/FC-PGA2 9 mA 9
I
L
Leakage Current for
Inputs, Outputs, and I/O
±100 µA 3, 4, 5, 6