Product Info

Intel® Dual Band Wireless-AC 8260 8 mm
Intel® Dual Band Wireless-AC 8265 8 mm
Intel® Wireless-AC 9260 14 mm
Intel® Wireless-AC 9461 (9161NGW) 19 mm
Intel® Wireless-AC 9461 (9161D2W) 12 mm
Intel® Wireless-AC 9462 (9162NGW) 14 mm
Intel® Wireless-AC 9462 (9162D2W) 15 mm
Intel® Wireless-AC 9560 (9560NGW) 18 mm
Intel® Wireless-AC 9560 (9560D2W) 15 mm
Intel® Wireless-AC 9560 (9560D2WL) TBD
Intel® Tri-Band Wireless-AC 17265 8 mm
Intel® Tri-Band Wireless-AC 18260 8 mm
Intel® Tri-Band Wireless-AC 18265 8 mm
Intel® Wireless Gigabit Sink W13100 8 mm
Intel® Wireless Gigabit 11000 8 mm
Intel® Wireless Gigabit Sink W13110VR 8 mm
Intel® Wireless Gigabit 11100VR 8 mm
Intel® Wi-Fi 6 AX201 TBD
Intel® Wi-Fi 6 AX200 TBD
* This wireless adapter may be installed in mobile devices only (requires > 20 cm antenna separation from the
body of user).
For WiFi/Bluetooth combination adapters it is recommended that a 5 cm separation distance between transmitting
antennas be provided within the host system to maintain an adequate separation ratio for simultaneous WiFi and
Bluetooth transmission. For less than 5 cm separation the separation ratio must be verified according to FCC
publication KDB 447498 for the specific adapter.
Additional regulatory authorization process may be required if wishing to place the 60 GHz/802.11ad RFEM (antenna
array) closer than 20 cm to the user.
Simultaneous Transmission of Intel® Wireless Adapters with Other Integrated or
Plug-In Transmitters
Based upon FCC Knowledge Database publication number 616217, when there are multiple transmitting devices
installed in a host device, an RF exposure transmitting assessment shall be performed to determine the necessary
application and test requirements. OEM integrators must identify all possible combinations of simultaneous
transmission configurations for all transmitters and antennas installed in the host system. This includes transmitters
installed in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation from
user). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessment
to determine if any additional requirements for testing or FCC approval is necessary.
Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the end user of the
product or system incorporating the Intel® wireless adapter, in compliance with local regulations. Host system must
be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label.
The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions as
described in the user documentation that comes with the product. For country-specific approvals, see Radio
Approvals. Intel Corporation is not responsible for any radio or television interference caused by unauthorized
modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting