Intel® NUC Board/Kit/Mini PC NUC11TNi3 / NUC11TNi5 / NUC11TNv5 / NUC11TNi7 / NUC11TNv7 Technical Product Specification Regulatory Models: NUC11TNK (Slim Kit, Mini PC) NUC11TNH (Tall Kit) NUC11TNB (Board) Includes “Lite” versions of above models December 2021 Revision 1.3 Intel® NUC Board NUC11TN may contain design defects or errors known as errata that may cause the product to deviate from published specifications.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Revision History Revision Revision History Date 1.0 First release of the Intel NUC Board/Kit NUC11TN Technical Product Specification January 2021 1.1 Updates and clarifications March 2021 1.2 Updates and clarifications June 2021 1.3 Updates and clarifications December 2021 Disclaimer This product specification applies to only the standard Intel NUC Board NUC11TN with BIOS identifier TNTGL357.00XX or TNTGLV57.00XX.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for Intel® NUC Board/Kits NUC11TN. Some features are only available on certain SKUs. Intended Audience The TPS is intended to provide detailed, technical information about Intel® NUC Board, Kit, and Mini PCs NUC11TN and its components to the vendors, system integrators, and other engineers and technicians who need this level of information.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Other Common Notation vi # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kb Kilobit (1024 bits) kb/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mb Megabit (1,048,576 bits) Mb/s Megabits per second TDP Thermal Design Power xxh An address or
Board Identification Information Basic Intel® NUC Board NUC11TN Identification Information AA Revision BIOS Revision Notes M11895-XXX TNTGL357.00XX 1 TNTGLV57.00XX 1 M11904-XXX M11908-XXX K87766-XXX K87765-XXX M11900-XXX M11901-XXX Basic Intel® NUC Board NUC11TN “Lite” Identification Information AA Revision BIOS Revision Notes M61239-XXX TNTGL357.00XX 1 TNTGLV57.00XX 1 M61235-XXX M61234-XXX M64202-XXX Notes: 1. The AA number is found on a small label on the component side of the board.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification NUC11TNKv50Z NUC11TNBv50Z NUC11TNKi70Z NUC11TNBi70Z NUC11TNHi70Z Specification Changes or Clarifications The table below indicates the Specification Changes or Specification Clarifications that apply to the Intel NUC Board/Kit/Mini PC NUC11TN.
Table of Contents 1 Product Description ............................................................................................. 13 1.1 Overview ...................................................................................................................................................... 13 1.1.1 Summary of Mini PC SKUs ................................................................................................. 13 1.1.2 Summary of Kit and Board SKUs.........................................
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 5 Overview of BIOS Features ................................................................................. 48 5.1 5.2 5.3 5.4 5.5 5.6 Introduction ................................................................................................................................................ 48 BIOS Updates ...............................................................................................................................
Contents Table 8. SATA Combined Data/Power Header .............................................................................................. 31 Table 9. Internal USB 2.0 Header (1.25 mm pitch)........................................................................................ 31 Table 10. Serial Port Header (1.25 mm pitch) ................................................................................................. 32 Table 11. M.2 2280 Module (Mechanical Key M) Connector ......................
1 Product Description 1.1 Overview 1.1.1 Summary of Mini PC SKUs Product Codes and MM#s for the SKUs below can be found at https://ark.intel.com. Processor Intel® Core™ i7-1185G7 Processor with Intel® vPro® Technology Intel® Core™ i5-1145G7 Processor with Intel® vPro® Technology 1 “WW” refers to worldwide 1.1.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 1.1.3 Feature Summary Table 1 summarizes the major features of Intel® NUC Board, Kit, and Mini PC NUC11TN. Table 1. Feature Summary Board Dimensions 4.0in by 4.0in (104.1mm by 101.
Product Overview Communication Intel® Wi-Fi 6 AX201 (Gig+) M.2 2230 add-in card (Mini PC and Kit only) via M.2 2230 (key type E) connector • 802.11ax, Dual Band, 2x2 Wi-Fi + Bluetooth v5.2 • Maximum transfer speed up to 2.4 Gbps • Supports PCIe and USB • Intel® AMT/vPro support on Core i5 vPro and Core i7 vPro SKUs only More information about Intel® wireless products can be found at https://ark.intel.com To obtain drivers visit https://downloadcenter.intel.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Power AC Adapter • Core i3 ships with a 90W 19V adapter • Core i5, Core i5 vPro, Core i7, and Core i7 vPro ship with a 120W 19V adapter Internal Power Header • 4-pos/dual row (2x2) right-angled header Operating Temperatures BIOS Operating System (Mini PCs only) Hardware Monitor Subsystem † Power Input • 12VDC to 24VDC +/- 5% with DC voltage protection • 12VDC to 19VDC +/- 5% with DC voltage protection for “Lite” SKUs 0-40C externa
Product Overview 2 Product Layout 2.1 Board Layout 2.1.1 Board Layout (Bottom) Figure 1 shows the location of the major components on the bottom of Intel® NUC Board NUC11TN. Figure 1.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Table 3. Components Shown in Figure 1 18 Item from Figure 1 Description A 12-24 V DC Input Jack (12-19V DC on “Lite” SKUs) B HDMI 2.0b Port 1 with Built-In CEC Support C LAN Connector D Back Panel USB 3.2 Gen 2 / USB 2.0 E HDMI 2.0b Port 2 with Built-In CEC Support F BIOS Security Header G Serial Port Header H M.
Product Overview 2.1.2 Board Layout (Dual LAN Only) (Bottom) Figure 2 shows the location of the major components on the bottom of Intel® NUC Board NUC11TN Dual LAN. The Dual LAN SKUs include a M.2 2242 card and a Dual LAN I/O board as indicated in Figure 2. Figure 2. Major Board Components (Dual LAN only) (Bottom) with Pin 1 Indicators Item from Figure 2 Description A 12-24 V DC Input Jack B HDMI 2.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 20 D Back Panel USB 3.2 Gen 2 / USB 2.0 E HDMI 2.0b Port 2 with Built-In CEC Support F Dual LAN/Dual USB IO Board G Combined Data/Power SATA Connector H Serial Port Header I M.2 2230 Module Connector (Key Type E) (Wireless card on Mini PCs and Kits only) J CMOS Battery Connector K USB 2.0 Header L USB 2.0 Header M M.2 2280 Module Connector (Key Type M) (NVMe Only) N Front Panel USB 3.2 Gen 2 O Front Panel USB 3.
Product Overview 2.1.3 Board Layout (Top) Figure 3 shows the location of the major components on the bottom-side of Intel® NUC Board NUC11TN. Figure 3. Major Board Components (Top) Table 4.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 2.1.4 Front Panel Item Description A B C USB 3.2 Gen 2 Port (blue) USB 3.2 Gen 2 Port (blue) Front Panel Power Button Figure 4. Front Panel Connectors 2.1.5 Back Panel Item Description A B 12-24 V DC Input Jack (12-19V DC on “Lite” SKUs) HDMI 2.0b Port 1 C D LAN Connector USB 3.2 Gen 2 Port (blue) / USB 2.0 Port (black) E †F HDMI 2.0b Port 2 †Thunderbolt™ Port 2 † G † Thunderbolt™ Port 1 Figure 5.
Product Overview 2.1.6 Chassis Expandability Options The tall chassis provides a back-panel expansion bay that includes a removeable faceplate for when no ports are installed and an internal removeable bracket that is pre-punched for attaching one DB9 port. Some 3rd party expandability dongles are available from https://gorite.com and a specification is available for the design of 3rd party add in cards. Figure 6.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 2.1.7 Block Diagram Figure 8.
Product Overview 3 Feature Descriptions 3.1 System Memory Figure 1 illustrates the memory channel and SO-DIMM configuration. 3.1.1 Intel® NUC Mini PC Memory Information Intel® NUC Mini PCs NUC11TN ship with 2 x 4 GB DDR4 3200 MHz SODIMMs or 2 x 8 GB DDR4 3200 MHz SODIMMs included. More information about available Intel® NUC Mini PCs NUC11TN can be found in Section 1.1.1 Summary of Mini PC SKUs. 3.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification • HDR (High Dynamic Range) support • HDCP (High-bandwidth Digital Content Protection) 2.3, 2.2, and 1.4 Notes: 1. 2. 3. Resolution support is subject to memory bandwidth availability Single 8K at 60 Hz display, supported by monitors that accept dual DP input for tiled screen Not available on “Lite” SKUs Intel® UHD Graphics for 11th Gen Intel Processors 3.2.
Product Overview in the BIOS, the system rebooted, and then the persistent display emulation feature must be reenabled. 3.3 Integrated Audio HDMI and DP† interfaces can carry audio along with video. The processor supports three HD audio streams over four digital ports simultaneously.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 3.6 LAN Subsystem 3.6.1 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 9). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 9. LAN Connector LED Locations Table 5 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 5. LAN Connector LED States LED LED Color Link Green Data Rate 3.
Product Overview Table 6. Systems States State Description G0/S0/C0 Full On: CPU operating. Individual devices may be shut to save power. The different CPU operating levels are defined by Cx states. GO/S0/Cx Cx State: CPU manages C-states by itself and can be in lower power states. G1 Suspend-To-RAM (STR): The system context is maintained in system DRAM, but power is shut to non-critical circuits. Memory is retained and refreshes continue.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification NOTE The use of these wake-up events from an ACPI state requires an operating system that provides full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake events.
4 Technical Reference 4.1 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: back panel USB Type A and Type C, front panel USB, internal USB headers, internal power header, and DC Vin jack. All other connectors and headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors or headers to power devices external to the computer’s chassis.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Table 10. Serial Port Header (1.25 mm pitch) Pin Signal Name Description 1 DCD Data Carrier Detect 2 RXD# Receive Data 3 TXD# Transmit Data 4 DTR Data Terminal Ready 5 GND Ground 6 DSR Data Set Ready 7 RTS Request to Send 8 RTS CTS Clear to Send 9 RI Ring Indicator Connector is 1x9 1.25mm Pitch PicoBlade* Header, Surface Mount, Vertical, Lead-Free, 9 Circuits. Table 11. M.
Technical Reference 26 N/C 27 GND 24 N/C 25 PETp2 22 N/C 23 PETn2 20 N/C 21 GND 18 3.3V (4A total for pins 74, 72, 70, 18, 16, 14, 12, 4, 2 (0.5A per pin)) 19 PERp2 16 3.3V (4A total for pins 74, 72, 70, 18, 16, 14, 12, 4, 2 (0.5A per pin)) 17 PERn2 14 3.3V (4A total for pins 74, 72, 70, 18, 16, 14, 12, 4, 2 (0.5A per pin)) 15 GND 12 3.3V (4A total for pins 74, 72, 70, 18, 16, 14, 12, 4, 2 (0.5A per pin)) 13 PETp3 10 DAS/DSS# (I/O)/LED1# (I)(0/3.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Connector Key 25 Connector Key UART RXD/BRI_RSP (O) (0/1.8V) 23 WGR_CLKP UART WAKE# (O) (0/3.3V) 21 WGR_CLKN GND/LNA_EN 19 GND BT_LED (LED2#) 17 WGR_D0P PCM_OUT/I2SSD_OUT/CLKREQ0 15 WGR_D0N 12 PCM_IN/I2SSD_IN 13 GND 10 PCM_SYNC/I2SWS/RF_RESET_B 11 WGR_D1P PCM_CLK/I2SSCK 9 WGR_D1N LED1# 7 GND 3.3V (2A total for pins 74, 72, 4, 2 (0.5A per pin)) 5 USB_D- 3.3V (2A total for pins 74, 72, 4, 2 (0.
Technical Reference N/C 23 N/C N/C 21 CONFIG_0 or N/C Connector Key 19 Connector Key Connector Key 17 Connector Key Connector Key 15 Connector Key Connector Key 13 Connector Key 10 DAS/DSS# (I/O)/LED1# (I)(0/3.3V) 11 GND 8 N/C 9 USB_D- N/C 7 USB_D+ 3.3V 5 GND 3.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 4.1.1.1 Front Panel Header (2.0 mm Pitch) This section describes the functions of the front panel header. Table 14 lists the signal names of the front panel header. Figure 10 is a connection diagram for the front panel header. Table 14. Front Panel Header (2.
Technical Reference 4.1.1.1.3 Power/Sleep LED Header Pins 2 and 4 can be connected to a one- or two-color LED. Table 15 and Table 16 show the possible LED states. Table 15. States for a One-Color Power LED LED State Description Off Power off Blinking Standby Steady Normal operation Table 16.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Figure 11. Location of the BIOS Security Jumper Table 17 describes the jumper settings for the three modes: normal, lockdown, and configuration. Table 17. BIOS Security Jumper Settings 38 Function/Mode Jumper Setting Configuration Normal 1-2 Lockdown 2-3 The BIOS uses current configuration information and passwords for booting.
Technical Reference Configuration 4.1.1.3 None BIOS Recovery Update process if a matching *.bio file is found. Recovery Update can be cancelled by pressing the Esc key. If the Recovery Update was cancelled or a matching *.bio file was not found, a Config Menu will be displayed. The Config Menu consists of the following (followed by the Power Button Menu selections): [1] Suppress this menu until the BIOS Security Jumper is replaced. [2] Clear BIOS User and Supervisor Passwords.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Fan Header Current Capability 4.1.1.4 Table 18 lists the current capability of the fan headers. Table 18. Fan Header Current Capability Fan Header Maximum Available Current Processor fan 1A Power Supply Connectors 4.1.1.5 NOTE External power voltage, 12-24 (±5%) V DC†, is dependent on the type of power supply used.
Technical Reference Table 19. Internal Power Supply Connector Pins Pins 1,2 3,4 Signal Name +12-24V† GND Figure 12. Connection Diagram for the Internal Power Supply Connector † 4.2 4.2.1 “Lite” SKUs support an input voltage range of 12-19V DC Mechanical Considerations Chassis Images Figure 13.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Figure 14. Slim Chassis Image Angled Front Figure 15. Tall Chassis Image Back Panel Figure 16.
Technical Reference Figure 17. Tall “Lite” Chassis Image Back Panel Figure 18. Slim Chassis Image Back Panel Figure 19. Slim “Lite” Chassis Image Back Panel 4.2.2 Form Factor The board is designed to fit into a custom chassis. Figure 20 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 104.1 millimeters (front to back) by 101.6 millimeters (side to side).
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification Figure 20.
Technical Reference Figure 21 shows the height dimensions of the board. Dimensions are in mm. Figure 21. Board Height Dimensions 4.3 Thermal Considerations CAUTION Failure to ensure appropriate airflow may result in reduced performance of both the processor and/or voltage regulator or, in some instances, damage to the board. All responsibility for determining the adequacy of any thermal or system design remains solely with the system integrator.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 4.4 Reliability The demonstrated Mean Time Between Failures (MTBF) is done through 24/7 testing. Full Intel® NUC systems in chassis with memory, SSD or HDD, and a fan are ran at 100% on time for 90 days continuously while running system wide stress inducing software in a 40 °C ambient air temperature chamber. The demonstrated MTBF for Intel NUC Board NUC11TN is >50,000 hours. 4.
Technical Reference Packaged Random profile 5 Hz to 40 Hz @ 0.015 g^2/Hz to 500 Hz @ 0.00015 g^2/Hz(slope down) Input acceleration is 1.09 gRMS Note: The operating temperature of the board may be determined by measuring the air temperature from the junction of the heatsink fins and fan, next to the attachment screw, in a closed chassis, while the system is in operation.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 5 Overview of BIOS Features 5.1 Introduction The board uses an Intel AMI BIOS core that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated through multiple methods (see Section 5.2). The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The SPI Flash includes a 32 MB flash memory device.
Technical Reference NOTE The network can be selected as a boot device. This selection allows booting from the onboard LAN or a network add-in card with a remote boot ROM installed. Pressing the key during POST automatically forces booting from the LAN. To use this key during POST, the User Access Level in the BIOS Setup program’s Security menu must be set to Full. 5.3.1 Boot Device Selection During Post Pressing the key during POST causes a boot device menu to be displayed.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 5.4 [F7] Update BIOS BIOS Update during the BDS phrase. The BIOS will update independent of any OS loading and provides a menu UI accessible during boot up. This is not a recovery tool and will not overwrite a corrupt BIOS or ME firmware. [F9] Remote Assistance Note: Will only be displayed if Remote Assistance is supported.
Technical Reference 5.5 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A Supervisor and User password can be set for the BIOS Setup program and for botting the computer, with the following restrictions: • The Supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is Supervisor Mode.
Intel NUC Board/Kit/Mini PC NUC11TN{X} Technical Product Specification 52 CMOS Timer Not Set The battery may be losing power. Replace the battery soon. Processor Thermal Trip Processor overheated. Auto RTC Reset The system triggers RTC clear to recover the system back to the normal condition from consecutive boot failure.