Technical product specification

ManualsBrandsIntel ManualsOtherIntel NUC Board D33217GK

Intel® NUC Board

DCP847SKE

Technical Product Specification

March 2014

Order Number: G81548-006

The Intel NUC Board DCP847SKE may contain design defects or errors known as errata that may cause the product to deviate from published specifications.

Current characterized errata are documented in the Intel NUC Board DCP847SKE Specification Update.

Summary of content (84 pages)

PAGE 1
Intel® NUC Board DCP847SKE Technical Product Specification March 2014 Order Number: G81548-006 The Intel NUC Board DCP847SKE may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel NUC Board DCP847SKE Specification Update.
PAGE 2
Revision History Revision Revision History Date ® 001 First release of the Intel Specification NUC Board DCP847SKE Technical Product January 2013 002 Specification clarification January 2013 003 Specification clarification May 2013 004 Specification clarification July 2013 005 Specification clarification October 2013 006 Specification clarification March 2014 Disclaimer This product specification applies to only the standard Intel® NUC Board with BIOS identifier GKPPT10H.86A.
PAGE 3
Board Identification Information Basic Intel® NUC Board DCP847SKE Identification Information AA Revision BIOS Revision Notes G79416-103 GKPPT10H.86A.0028 1,2 G79416-104 GKPPT10H.86A.0036 1,2 G79416-105 GKPPT10H.86A.0040 1,2 G79416-106 GKPPT10H.86A.0047 1,2 Notes: 1. The AA number is found on a small label on the component side of the board. 2.
PAGE 4
Intel NUC Board DCP847SKE Technical Product Specification Errata Current characterized errata, if any, are documented in a separate Specification Update. See http://www.intel.com/content/www/us/en/motherboards/desktopmotherboards/motherboards.html?wapkw=desktop+boards for the latest documentation.
PAGE 5
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for Intel® NUC Board DCP847SKE. Intended Audience The TPS is intended to provide detailed, technical information about Intel NUC Board DCP847SKE and its components to the vendors, system integrators, and other engineers and technicians who need this level of information. It is specifically not intended for general audiences.
PAGE 6
Intel NUC Board DCP847SKE Technical Product Specification Other Common Notation vi # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kb Kilobit (1024 bits) kb/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mb Megabit (1,048,576 bits) Mb/s Megabits per second TDP Thermal Design Power xxh An address or data value en
PAGE 7
Contents Revision History Disclaimer ................................................................................................ ii Board Identification Information .................................................................. iii Errata ......................................................................................................iv Preface Intended Audience..................................................................................... v What This Document Contains..................
PAGE 8
Intel NUC Board DCP847SKE Technical Product Specification 2 Technical Reference 2.1 Memory Resources ........................................................................... 35 2.1.1 Addressable Memory ............................................................. 35 2.1.2 Memory Map ......................................................................... 37 2.2 Connectors and Headers .................................................................... 37 2.2.1 Back Panel Connectors ....................
PAGE 9
Contents 5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance ...................................................................... 71 5.1.1 Safety Standards................................................................... 71 5.1.2 European Union Declaration of Conformity Statement ................ 72 5.1.3 Product Ecology Statements ................................................... 73 5.1.4 EMC Regulations .................................................................
PAGE 10
Intel NUC Board DCP847SKE Technical Product Specification 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. x BIOS Setup Configuration Jumper Settings .......................................... 47 Fan Header Current Capability ............................................................ 50 Thermal Considerations for Components .............................................. 52 Tcontrol Values for Components .........................................................
PAGE 11
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of the board. Table 1. Feature Summary Form Factor 4.0 inches by 4.0 inches (101.60 millimeters by 101.
PAGE 12
Intel NUC Board DCP847SKE Technical Product Specification Table 1.
PAGE 13
Product Description 1.1.2 Board Layout (Top) Figure 1 shows the location of the major components on the top-side of Intel NUC Board DCP847SKE. Figure 1.
PAGE 14
Intel NUC Board DCP847SKE Technical Product Specification Table 2 lists the components identified in Figure 1. Table 2.
PAGE 15
Product Description 1.1.3 Board Layout (Bottom) Figure 2 shows the location of the major components on the bottom-side of Intel NUC Board DCP847SKE. Figure 2.
PAGE 16
Intel NUC Board DCP847SKE Technical Product Specification Table 3. Components Shown in Figure 2 16 Item from Figure 2 Description A Back panel connectors B PCI Express Full-Mini Card connector C PCI Express Half-Mini Card connector D Front panel dual-port USB 2.0 header E BIOS setup configuration jumper F Front panel USB 2.
PAGE 17
Product Description 1.1.4 Block Diagram Figure 3 is a block diagram of the major functional areas of the board. Figure 3.
PAGE 18
Intel NUC Board DCP847SKE Technical Product Specification 1.2 1.3 Online Support To find information about… Visit this World Wide Web site: Intel NUC Board DCP847SKE http://www.intel.com/products/motherboard/index.htm NUC Board Support http://www.intel.com/p/en_US/support?iid=hdr+support Available configurations for Intel NUC Board DCP847SKE http://ark.intel.com Chipset information http://www.intel.com/products/desktop/chipsets/index.htm BIOS and driver updates http://downloadcenter.intel.
PAGE 19
Product Description 1.4 System Memory The board has two 204-pin SO-DIMM sockets and supports the following memory features: • • • • • • • • • • 1.5 V DDR3 SDRAM SO-DIMMs with gold plated contacts Support for 1.35 V Low Voltage DDR3 (new JEDEC specification) Two independent memory channels with interleaved mode support Unbuffered, single-sided or double-sided SO-DIMMs 16 GB maximum total system memory (with 4 Gb memory technology). Refer to Section 2.1.
PAGE 20
Intel NUC Board DCP847SKE Technical Product Specification 1.4.1 Memory Configurations The processor supports the following types of memory organization: • • 20 Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both SO-DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be equal.
PAGE 21
Product Description Figure 4 illustrates the memory channel and SO-DIMM configuration. Figure 4.
PAGE 22
Intel NUC Board DCP847SKE Technical Product Specification Intel® QS77 Express Chipset 1.5 Intel QS77 Express Chipset with Direct Media Interface (DMI) interconnect provides interfaces to the processor and the USB, SATA, LPC, LAN, and PCI Express interfaces. The Intel QS77 Express Chipset is a centralized controller for the board’s I/O paths. For information about Refer to The Intel QS77 chipset http://www.intel.com/products/desktop/chipsets/index.htm Resources used by the chipset Chapter 2 1.5.
PAGE 23
Product Description 1.6.1.1 Intel® High Definition (Intel® HD) Graphics The Intel HD graphics controller features the following: • 3D Features  DirectX* 10.1 and OpenGL* 3.0 compliant  DirectX 11.0 CS4.0 only •  Shader Model 4.0 Video  High-Definition content at up to 1080p resolution  Hardware accelerated MPEG-2, VC-1/WMV and H.264/AVC Hi-Definition video formats  Intel HD Technology with Advanced Hardware Video Transcoding  Blu-ray* S3D via HDMI 1.
PAGE 24
Intel NUC Board DCP847SKE Technical Product Specification 1.7 USB The board supports seven USB 2.0 ports. The port arrangement is as follows: • • • • Three front panel ports (via one dual-port internal header and one front panel connector) Two ports are implemented with vertical back panel connectors One port is reserved for the PCI Express Half-Mini Card One port is reserved for the PCI Express Full-Mini Card All seven USB 2.0 ports are high-speed, full-speed, and low-speed capable.
PAGE 25
Product Description 1.9 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied via the power supply 5 V STBY rail.
PAGE 26
Intel NUC Board DCP847SKE Technical Product Specification 1.10.1 Intel® 82579V Gigabit Ethernet Controller The Intel 82579V Gigabit Ethernet Controller supports the following features: • • • 10/100/1000 BASE-T IEEE 802.3 compliant Energy Efficient Ethernet (EEE) IEEE802.
PAGE 27
Product Description 1.10.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 5. LAN Connector LED Locations Table 5 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 5. LAN Connector LED States LED LED Color LED State Condition Off LAN link is not established. Link Green On LAN link is established.
PAGE 28
Intel NUC Board DCP847SKE Technical Product Specification 1.11 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including thermal and voltage monitoring. For information about Refer to Wired for Management (WfM) Specification www.intel.com/design/archives/wfm/ 1.11.
PAGE 29
Product Description 1.11.3 Thermal Solution Figure 6 shows the location of the thermal solution and processor fan header. Item Description A Processor fan header B Thermal solution Figure 6.
PAGE 30
Intel NUC Board DCP847SKE Technical Product Specification 1.12 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support:  Power Input  Instantly Available PC technology  LAN wake capabilities  Wake from USB  WAKE# signal wake-up support  Wake from S5  +5 V Standby Power Indicator LED 1.12.
PAGE 31
Product Description 1.12.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off. The operating system uses information from applications and user settings to put the system as a whole into a low-power state.
PAGE 32
Intel NUC Board DCP847SKE Technical Product Specification 1.12.1.2 Wake-up Devices and Events Table 8 lists the devices or specific events that can wake the computer from specific states. Table 8.
PAGE 33
Product Description 1.12.2.1 Power Input When resuming from an AC power failure, the computer returns to the power state it was in before power was interrupted (on or off). The computer’s response can be set using the Last Power State feature in the BIOS Setup program’s Boot menu. For information about Refer to The location of the internal power connector Figure 2, page 15 The signal names of the internal power connector Table 13, page 43 1.12.2.
PAGE 34
Intel NUC Board DCP847SKE Technical Product Specification 1.12.2.7 +5 V Standby Power Indicator LED The standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the location of the standby power LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices.
PAGE 35
2 Technical Reference 2.1 Memory Resources 2.1.1 Addressable Memory The board utilizes 16 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory).
PAGE 36
Intel NUC Board DCP847SKE Technical Product Specification Figure 8.
PAGE 37
Technical Reference 2.1.2 Memory Map Table 9 lists the system memory map. Table 9. System Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 16777216 K 100000 – 400000000 16382 MB Extended memory 960 K - 1024 K F0000 - FFFFF 64 KB Runtime BIOS 896 K - 960 K E0000 - EFFFF 64 KB Reserved 800 K - 896 K C8000 - DFFFF 96 KB Potential available high DOS memory (open to the PCI Conventional bus). Dependent on video adapter used.
PAGE 38
Intel NUC Board DCP847SKE Technical Product Specification 2.2.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors for the board. Item Description A B C D E F LAN HDMI connector 2 HDMI connector 1 USB 2.0 port USB 2.0 port 19 V DC input jack Figure 9.
PAGE 39
Technical Reference 2.2.2 Connectors and Headers (Bottom) Figure 10 shows the locations of the connectors and headers on the bottom-side of the board. Figure 10.
PAGE 40
Intel NUC Board DCP847SKE Technical Product Specification Table 10 lists the connectors and headers identified in Figure 10. Table 10. Connectors and Headers Shown in Figure 10 40 Item from Figure 10 Description A PCI Express Full-Mini Card connector B PCI Express Half-Mini Card connector C Front panel dual-port USB 2.
PAGE 41
Technical Reference 2.2.2.1 Signal Tables for the Connectors and Headers Table 11. PCI Express Full-Mini Card Connector Pin Signal Name 1 WAKE# 2 3.3 V 3 Reserved 4 GND 5 Reserved 6 1.5 V 7 CLKREQ# 8 Reserved 9 GND 10 Reserved 11 REFCLK- 12 Reserved 13 REFCLK+ 14 Reserved 15 GND 16 Reserved 17 Reserved 18 GND 19 Reserved 20 Reserved 21 GND 22 PERST# 23 PERn0 24 +3.3 V aux 25 PERp0 26 GND 27 GND 28 +1.
PAGE 42
Intel NUC Board DCP847SKE Technical Product Specification Table 11. PCI Express Full-Mini Card Connector (continued) Pin Signal Name 39 +3.3 Vaux 40 GND 41 +3.3 Vaux 42 LED_WWAN# 43 Reserved 44 LED_WLAN# 45 Reserved 46 LED_WPAN# 47 Reserved 48 +1.5V 49 Reserved 50 GND 51 Reserved 52 +3.3V Additional Signal Name (mSATA) Vendor (mSATA) Vendor (mSATA) DA/DSS (mSATA) Presence Detection Table 12. Dual-Port Front Panel USB 2.
PAGE 43
Technical Reference 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • • External Power Supply – the board can be powered through a 19 V DC connector on the back panel. The back panel DC connector is compatible with a 5.5 mm/OD (outer diameter) and 2.5 mm/ID (inner diameter) plug, where the inner contact is +19 (±10%) V DC and the shell is GND. The maximum current rating is 10 A.
PAGE 44
Intel NUC Board DCP847SKE Technical Product Specification Figure 11. Connection Diagram for Front Panel Header 2.2.2.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires a SATA hard drive or optical drive connected to an onboard SATA connector. 2.2.2.4.
PAGE 45
Technical Reference 2.2.2.4.4 Power Switch Header Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another on/off signal. 2.2.2.5 Front Panel USB 2.0 Header Figure 12 is a connection diagram for the front panel USB 2.
PAGE 46
Intel NUC Board DCP847SKE Technical Product Specification 2.3 BIOS Setup Configuration Jumper CAUTION Do not move a jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13 shows the location of the BIOS Setup Configuration jumper. Table 16 describes the BIOS Setup configuration jumper settings for the three modes: normal, configure, and recovery.
PAGE 47
Technical Reference Table 16 lists the settings for the jumper. Table 16. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Note that this Configure mode is the only way to clear the BIOS/CMOS settings.
PAGE 48
Intel NUC Board DCP847SKE Technical Product Specification 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into a custom chassis. Figure 14 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 4.0 inches by 4.0 inches [101.60 millimeters by 101.60 millimeters]. Figure 14.
PAGE 49
Technical Reference Figure 15 shows the height dimensions of the board. Figure 15. Board Height Dimensions 2.5 2.5.1 Electrical Considerations Power Supply Considerations CAUTION The external 19 V DC jack is the primary power input connector of Intel NUC Board DCP847SKE. However, the board also provides an internal 1 x 2 power connector that can be used in custom-developed systems that have an internal power supply.
PAGE 50
Intel NUC Board DCP847SKE Technical Product Specification 2.5.2 Fan Header Current Capability Table 17 lists the current capability of the fan headers. Table 17. Fan Header Current Capability 2.6 Fan Header Maximum Available Current Processor fan .1 A Thermal Considerations CAUTION A chassis with a maximum internal ambient temperature of 50 oC at the processor fan inlet is recommended.
PAGE 51
Technical Reference Figure 16 shows the locations of the localized high temperature zones. Item Description A B Processor voltage regulator area Thermal solution Figure 16.
PAGE 52
Intel NUC Board DCP847SKE Technical Product Specification Table 18 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the board. Table 18.
PAGE 53
Technical Reference 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Telcordia SR-332 Issue 2, Method I, Case 3, 55 ºC ambient. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF for the board is 90,936 hours. 2.8 Environmental Table 20 lists the environmental specifications for the board. Table 20.
PAGE 54
Intel NUC Board DCP847SKE Technical Product Specification 54
PAGE 55
3 Overview of BIOS Features 3.1 Introduction The board uses a Intel Visual BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the Visual BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as GKPPT10H.86A.
PAGE 56
Intel NUC Board DCP847SKE Technical Product Specification 3.2 BIOS Flash Memory Organization The Serial Peripheral Interface Flash Memory (SPI Flash) includes a 64 Mb (8192 KB) flash memory device. 3.3 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components.
PAGE 57
Error Messages and Beep Codes 6. After the operating system loads the USB drivers, all legacy and non-legacy USB devices are recognized by the operating system, and Legacy USB support from the BIOS is no longer used. 7. Additional USB legacy feature options can be access by using Intel® Integrator Toolkit. To install an operating system that supports USB, verify that Legacy USB support in the BIOS Setup program is set to Enabled and follow the operating system’s installation instructions. 3.
PAGE 58
Intel NUC Board DCP847SKE Technical Product Specification 3.5.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel Integrator’s Toolkit that is available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo. Refer to For information about Intel Integrator Toolkit http://developer.intel.
PAGE 59
Error Messages and Beep Codes 3.7 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second, removable drive third, and the network fourth. 3.7.1 Network Boot The network can be selected as a boot device. This selection allows booting from the onboard LAN or a network add-in card with a remote boot ROM installed.
PAGE 60
Intel NUC Board DCP847SKE Technical Product Specification 3.8 Hard Disk Drive Password Security Feature The Hard Disk Drive Password Security feature blocks read and write accesses to the hard disk drive until the correct password is given. Hard Disk Drive Passwords are set in BIOS SETUP and are prompted for during BIOS POST. For convenient support of S3 resume, the system BIOS will automatically unlock drives on resume from S3. Valid password characters are A-Z, a-z, and 0-9.
PAGE 61
Error Messages and Beep Codes 3.9 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is the supervisor mode.
PAGE 62
Intel NUC Board DCP847SKE Technical Product Specification 62
PAGE 63
4 Error Messages and Blink Codes 4.1 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s front panel power LED to blink an error message describing the problem (see Table 25). Table 25. Front-panel Power LED Blink Codes Type Pattern Note BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds. The pattern repeats until the BIOS update is complete. Video error (Note) On-off (1.
PAGE 64
Intel NUC Board DCP847SKE Technical Product Specification 4.3 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred. Displaying the POST codes requires a POST card that can interface with the Debug header. Refer to the location of the Debug header in Figure 1.
PAGE 65
Error Messages and Beep Codes Table 28.
PAGE 66
Intel NUC Board DCP847SKE Technical Product Specification Table 28.
PAGE 67
Error Messages and Beep Codes Table 28.
PAGE 68
Intel NUC Board DCP847SKE Technical Product Specification Table 28. Port 80h POST Codes (continued) Port 80 Code Progress Code Enumeration 0xB8 Resetting removable media 0xB9 Disabling removable media 0xBA Detecting presence of a removable media (IDE, CDROM detection etc.
PAGE 69
Error Messages and Beep Codes Table 29.
PAGE 70
Intel NUC Board DCP847SKE Technical Product Specification 70
PAGE 71
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel NUC Board DCP847SKE: • • • • • 5.1.
PAGE 72
Intel NUC Board DCP847SKE Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the products Intel® NUC Board DCP847SKE is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC (ROHS Directive).
PAGE 73
Regulatory Compliance and Battery Disposal Information Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC, 2006/95/EC & 2002/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC, 2006/95/EC a 2002/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC, 2006/95/EC in 2002/95/EC.
PAGE 74
Intel NUC Board DCP847SKE Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. Consulte la http://www.intel.
PAGE 75
Regulatory Compliance and Battery Disposal Information Russian В качестве части своих обязательств к окружающей среде, в Intel создана программа утилизации продукции Intel (Product Recycling Program) для предоставления конечным пользователям марок продукции Intel возможности возврата используемой продукции в специализированные пункты для должной утилизации. Пожалуйста, обратитесь на веб-сайт http://www.intel.
PAGE 76
Intel NUC Board DCP847SKE Technical Product Specification FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N.E.
PAGE 77
Regulatory Compliance and Battery Disposal Information Japan VCCI Statement Japan VCCI Statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
PAGE 78
Intel NUC Board DCP847SKE Technical Product Specification 5.1.5 e-Standby and ErP Compliance Intel NUC Board DCP847SKE meets the following program requirements in an adequate system configuration, including appropriate selection of an efficient power supply: • • • 78 EPEAT* Korea e-Standby European Union Energy-related Products Directive 2013 (ErP) Lot 6 For information about Refer to Electronic Product Environmental Assessment Tool (EPEAT) http://www.epeat.
PAGE 79
Regulatory Compliance and Battery Disposal Information 5.1.6 Regulatory Compliance Marks (Board Level) Intel NUC Board DCP847SKE has the regulatory compliance marks shown in Table 32. Table 32. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel NUC Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. CE mark.
PAGE 80
Intel NUC Board DCP847SKE Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
PAGE 81
Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
PAGE 82
Intel NUC Board DCP847SKE Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
PAGE 83
Regulatory Compliance and Battery Disposal Information 83
PAGE 84
Intel NUC Board DCP847SKE Technical Product Specification 84