Intel® Desktop Board D945GSEJT Technical Product Specification April 2009 Order Number: E62862-001US The Intel® Desktop Board D945GSEJT may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board D945GSEJT Specification Update.
Revision History Revision -001 Revision History First release of the Specification. Intel® Date Desktop Board D945GSEJT Technical Product April 2009 This product specification applies to only the standard Intel® Desktop Board D945GSEJT with BIOS identifier JT94510H.86A. Changes to this specification will be published in the Intel Desktop Board D945GSEJT Specification Update before being incorporated into a revision of this document.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board D945GSEJT. It describes the standard product and available manufacturing options.
Intel Desktop Board D945GSEJT Technical Product Specification Other Common Notation iv # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/sec Gigabytes per second Gbit Gigabit (1,073,741,824 bits) KB Kilobyte (1024 bytes) Kbit Kilobit (1024 bits) kbits/sec 1000 bits per second MB Megabyte (1,048,576 bytes) MB/sec Megabytes per second Mbit Megabit (1,048,576 bits) Mbit/sec Megabits per second xxh An address or data value
Contents 1 Product Description 1.1 Overview.......................................................................................... 9 1.1.1 Feature Summary .................................................................. 9 1.1.2 Board Layout ....................................................................... 11 1.1.3 Block Diagram ..................................................................... 13 1.2 Online Support................................................................................
Intel Desktop Board D945GSEJT Technical Product Specification 2.5 Electrical Considerations ................................................................... 2.5.1 Power Supply Considerations ................................................. 2.5.2 Fan Header Current Capability................................................ 2.5.3 Add-in Board Considerations .................................................. 2.6 Thermal Considerations .................................................................... 2.
Contents Figures 1-1. 1-2. 1-3. 1-4. 1-5. 2-1. 2-2. 2-3. 2-4. 2-5. 2-6. 2-7. Major Board Components ............................................................... 11 Block Diagram .............................................................................. 13 LAN Connector LED Locations.......................................................... 24 Thermal Sensors and Fan Headers ................................................... 25 Location of the Standby Power Indicator LED............................
Intel Desktop Board D945GSEJT Technical Product Specification 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. viii States for a One-Color Power LED ...................................................... BIOS Configuration Jumper Settings................................................... Fan Header Current Capability........................................................... Thermal Considerations for Components .............................................
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of Intel Desktop Board D945GSEJT. Table 1. Feature Summary Form Factor 20 mm-thin mini-ITX, (6.7 inches by 6.
Intel Desktop Board D945GSEJT Technical Product Specification Table 1. Feature Summary (continued) BIOS • Intel® BIOS (resident in the SPI Flash device) • Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS Instantly Available PC Technology • Support for PCI* Local Bus Specification Revision 2.
Product Description 1.1.2 Board Layout Figure 1-1 shows the location of the major components. Figure 1-1. Major Board Components Table 2 lists the components identified in Figure 1-1.
Intel Desktop Board D945GSEJT Technical Product Specification Table 2.
Product Description 1.1.3 Block Diagram Figure 1-2 is a block diagram of the major functional areas. Figure 1-2.
Intel Desktop Board D945GSEJT Technical Product Specification 1.2 1.3 Online Support To find information about… Visit this World Wide Web site: Intel Desktop Board D945GSEJT http://www.intel.com/products/motherboard/D945GSEJT/index.htm Desktop Board Support http://support.intel.com/support/motherboards/desktop Available configurations for the Intel Desktop Board D945GSEJT http://www.intel.com/products/motherboard/D945GSEJT/index.htm Chipset information http://www.intel.
Product Description 1.
Intel Desktop Board D945GSEJT Technical Product Specification Mobile Intel® 945GSE Chipset 1.5 The Mobile Intel 945GSE chipset consists of the following devices: • • Intel 82945GSE Graphics and Memory Controller Hub (GMCH) with Direct Media Interface (DMI) interconnect Intel 82801GBM I/O Controller Hub (ICH7-M) with DMI interconnect The GMCH component provides interfaces to the CPU, memory, and the DMI interconnect.
Product Description • 2D Graphics enhancements ⎯ 8, 16, and 32 bit color ⎯ Optimized 256-bit BLT engine ⎯ Color space conversion • ⎯ Anti-aliased lines Video ⎯ Hardware motion compensation for MPEG2 • ⎯ Software DVD at 30 fps full screen Intel® Zoom Utility For information about Refer to Obtaining graphics software and utilities Section 1.2, page 14 1.5.1.
Intel Desktop Board D945GSEJT Technical Product Specification 1.5.2 USB The board supports up to seven USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. ICH7-M provides the USB controllers for all USB ports.
Product Description NOTE ATA-66 and ATA-100 are faster timings and require a specialized cable to reduce reflections, noise, and inductive coupling. The PATA interface also supports ATAPI devices (such as CD-ROM drives) and ATA devices using the transfer modes. The BIOS supports Logical Block Addressing (LBA) and Extended Cylinder Head Sector (ECHS) translation modes. The drive reports the transfer rate and translation mode to the BIOS.
Intel Desktop Board D945GSEJT Technical Product Specification 1.6 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
Product Description 1.7.2 Parallel Port The parallel port is implemented as a 26-pin header on the board. Use the BIOS Setup program to set the parallel port mode. For information about Refer to The location of the parallel port header Figure 2-4, page 39 1.7.3 PS/2 Keyboard Interface A PS/2 keyboard port is implemented as a 6-pin header on the board. For information about Refer to The location of the keyboard header Figure 2-4, page 39 1.
Intel Desktop Board D945GSEJT Technical Product Specification 1.8.1 Audio Subsystem Drivers Audio drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining audio drivers Section 1.2, page 14 1.8.2 Audio Connectors and Headers The board contains an audio connector on the back panel and audio headers on the component side of the board.
Product Description 1.9 LAN Subsystem The LAN subsystem consists of the following: • • • Intel 82801GBM ICH7-M Realtek 8111D Gigabit Ethernet Controller for 10/100/1000 Mbits/sec Ethernet LAN connectivity RJ-45 LAN connector with integrated status LEDs Additional features of the LAN subsystem include: • • • CSMA/CD protocol engine LAN connect interface that supports the ethernet controller PCI Conventional bus power management ⎯ Supports ACPI technology ⎯ Supports LAN wake capabilities 1.9.
Intel Desktop Board D945GSEJT Technical Product Specification 1.9.2 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 1-3). Figure 1-3. LAN Connector LED Locations Table 5 describes the LED states when the board is powered up and the 10/100/1000 Mbits/sec LAN subsystem is operating. Table 5.
Product Description 1.10.2 Thermal Monitoring Figure 1-4 shows the locations of the thermal sensors and fan headers. Item Description A Remote thermal diode, located under the SO-DIMM B Thermal diode, located on the processor die C Chassis fan header Figure 1-4.
Intel Desktop Board D945GSEJT Technical Product Specification 1.11 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support: ⎯ Power connector ⎯ Fan headers ⎯ LAN wake capabilities ⎯ Instantly Available PC technology ⎯ Wake from USB ⎯ Wake from PS/2 devices ⎯ Power Management Event signal (PME#) wake-up support ⎯ WAKE# signal wake-up support 1.11.
Product Description 1.11.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off. The operating system uses information from applications and user settings to put the system as a whole into a low-power state.
Intel Desktop Board D945GSEJT Technical Product Specification 1.11.1.2 Wake-up Devices and Events Table 8 lists the devices or specific events that can wake the computer from specific states. Table 8.
Product Description 1.11.2 Hardware Support The board provides several power management hardware features, including: • • • • • • • • Fan header LAN wake capabilities Instantly Available PC technology Wake from USB PME# signal wake-up support Wake from PS/2 devices WAKE# signal wake-up support +5V Standby Power Indicator LED LAN wake capabilities and Instantly Available PC technology require power from the +5 V standby line.
Intel Desktop Board D945GSEJT Technical Product Specification 1.11.2.3 Instantly Available PC Technology Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the hard drive(s) and fan will power off, the front panel LED will blink). When signaled by a wake-up device or event, the system quickly returns to its last known state.
Product Description 1.11.2.8 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 1-5 shows the location of the standby power indicator LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. Figure 1-5.
Intel Desktop Board D945GSEJT Technical Product Specification 1.11.3 ENERGY STAR*, E-Standby, and EuP Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of new requirements. This Intel Desktop Board meets the ENERGY STAR requirements listed in Table 9 when used in corresponding system configurations. Table 9.
2 Technical Reference 2.1 Memory Map 2.1.1 Addressable Memory The board utilizes 2 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash), and chipset overhead resides above the top of DRAM (total system memory).
Intel Desktop Board D945GSEJT Technical Product Specification The amount of installed memory that can be used will vary based on add-in cards and BIOS settings. Figure 2-1 shows a schematic of the system memory map. All installed system memory can be used when there is no overlap of system addresses. Figure 2-1.
Technical Reference Table 10 lists the system memory map. Table 10. System Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 2097152 K 100000 - FFFFFFFF 2048 MB Extended memory 960 K - 1024 K F0000 - FFFFF 64 KB Runtime BIOS 896 K - 960 K E0000 - EFFFF 64 KB Reserved 800 K - 896 K C8000 - DFFFF 96 KB Potential available high DOS memory (open to the PCI bus). Dependent on video adapter used.
Intel Desktop Board D945GSEJT Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors/headers have overcurrent protection: Back panel and front panel USB and PS/2. The other internal connectors/headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors/headers to power devices external to the computer’s chassis.
Technical Reference 2.2.1 Back Panel 2.2.1.1 Back Panel Connectors Figure 2-2 shows the location of the back panel connectors. Item Description A 12 V power connector B VGA port C DVI-D connector D USB port E USB ports F LAN connector (RJ-45) G Audio line out Figure 2-2. Back Panel Connectors NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only.
Intel Desktop Board D945GSEJT Technical Product Specification 2.2.1.2 I/O Shield The I/O shield provided with the board allows access to all back panel connectors and is compatible with standard mini-ITX and microATX chassis. As an added benefit for system configurations with wireless PCI Express Mini Card solutions, the I/O shield also provides pre-cut holes for user installation of up to three external wireless antennas. Figure 2-3 shows an I/O shield reference diagram. Figure 2-3.
Technical Reference 2.2.2 Component-side Connectors and Headers Figure 2-4 shows the locations of the component-side connectors and headers. Figure 2-4.
Intel Desktop Board D945GSEJT Technical Product Specification Table 11 lists the component-side connectors and headers identified in Figure 2-4. Table 11.
Technical Reference 2.2.2.1 Signal Tables for the Connectors and Headers Table 12. Serial Port Header (COM 1 and COM 2) Pin Signal Name Pin Signal Name 1 DCD (Data Carrier Detect) 2 RXD# (Receive Data) 3 TXD# (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 RI (Ring Indicator) 10 Key (no pin) Table 13.
Intel Desktop Board D945GSEJT Technical Product Specification Table 15. Chassis Fan Header Pin Signal Name 1 Control 2 +12 V 3 Tach Table 16. Chassis Intrusion Header Pin Signal Name 1 Intruder# 2 Ground Table 17. SATA Connectors Pin Signal Name 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground Table 18.
Technical Reference Table 19.
Intel Desktop Board D945GSEJT Technical Product Specification Table 22. Internal Mono Speaker Header Pin Signal Name 1 + 2 − Table 23. Front Panel Audio Header for Intel HD Audio Pin Signal Name Pin Signal Name 1 [Port 1] Left channel 2 Ground 3 [Port 1] Right channel 4 PRESENCE# (Dongle present) 5 [Port 2] Right channel 6 [Port 1] SENSE_RETURN 7 SENSE_SEND (Jack detection) 8 Key (no pin) 9 [Port 2] Left channel 10 [Port 2] SENSE_RETURN Table 24.
Technical Reference 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • • PCI Express Mini Card (rev 1.2 compliant) connector PCI Conventional (rev 2.3 compliant) bus connector Note the following considerations for the PCI Conventional bus connector: • • The PCI Conventional bus connector is bus master capable. SMBus signals are routed to the PCI Conventional bus connector.
Intel Desktop Board D945GSEJT Technical Product Specification 2.2.2.4 Front Panel Header This section describes the functions of the front panel header. Table 26 lists the signal names of the front panel header. Figure 2-5 is a connection diagram for the front panel header. Table 26.
Technical Reference 2.2.2.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires one of the following: • • • SATA storage device connected to an onboard SATA connector PATA storage device connected to the onboard PATA connector Intel Z-U130 USB Solid State Drive (or compatible device) connected to one of the front panel USB headers 2.2.2.4.
Intel Desktop Board D945GSEJT Technical Product Specification 2.2.2.5 Front Panel USB Headers Figure 2-6 is a connection diagram for the front panel USB headers. # INTEGRATOR’S NOTES • • The +5 VDC power on the USB headers is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 2-6. Connection Diagram for Front Panel USB Header Figure 2-7.
Technical Reference 2.3 BIOS Configuration Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 2-8 shows the location of the jumper block. The jumper determines the BIOS Setup program’s mode. Table 28 lists the jumper settings for the three modes: normal, configure, and recovery. Figure 2-8.
Intel Desktop Board D945GSEJT Technical Product Specification Table 28. BIOS Configuration Jumper Settings 50 Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery None The BIOS attempts to recover the BIOS configuration. See Section 3.7 for more information on BIOS recovery.
Technical Reference 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into a mini-ITX or microATX form-factor chassis. Figure 2-9 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 6.7 inches by 6.7 inches [170 millimeters by 170 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the microATX specification. Figure 2-9.
Intel Desktop Board D945GSEJT Technical Product Specification 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The external 12 VDC jack is the primary power input connector of Intel Desktop Board D945GSEJT. However, the desktop board also provides an internal 2 x 2 power connector that can be used in systems that have an internal power supply. There is no isolation circuitry between the external 12 VDC jack and the internal 2 x 2 power connector.
Technical Reference 2.6 Thermal Considerations CAUTION Failure to ensure appropriate airflow may result in reduced performance of both the processor and/or voltage regulator or, in some instances, damage to the board. All responsibility for determining the adequacy of any thermal or system design remains solely with the reader. Intel makes no warranties or representations that merely following the instructions presented in this document will result in a system with adequate thermal performance.
Intel Desktop Board D945GSEJT Technical Product Specification Figure 2-10 shows the locations of the localized high temperature zones. Item Description A Memory SO-DIMM B C Processor voltage regulator area Intel Atom processor N270 D Intel 82945GSE GMCH Figure 2-10. Localized High Temperature Zones Table 30 provides maximum case temperatures for the board components that are sensitive to thermal changes.
Technical Reference Table 30. Thermal Considerations for Components Component Maximum Case Temperature Intel Atom processor N270 90 oC Processor voltage regulator area 85 oC Intel 82945GSE GMCH 105 oC Memory SO-DIMM 85 oC For information about Refer to Processor datasheets and specification updates Section 1.2, page 14 2.
Intel Desktop Board D945GSEJT Technical Product Specification • 2.5-inch PATA hard disk drive • ⎯ Load: continuous read/write benchmark Intel Z-U130 USB Solid-State Drive (or compatible device) on the USB flash drive header • • • • ⎯ Load: continuous read/write benchmark Wireless card on PCI Express Mini Card slot, connected via 802.
Technical Reference 2.9 Environmental Table 33 lists the environmental specifications for the board. Table 33.
Intel Desktop Board D945GSEJT Technical Product Specification 58
3 Overview of BIOS Features 3.1 Introduction The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as JT94510H.86A.
Intel Desktop Board D945GSEJT Technical Product Specification Table 34 lists the BIOS Setup program menu features. Table 34.
Overview of BIOS Features 3.4 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components. Using SMBIOS, a system administrator can obtain the system types, capabilities, operational status, and installation dates for system components.
Intel Desktop Board D945GSEJT Technical Product Specification 3.5 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system’s USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that supports USB. By default, Legacy USB support is set to Enabled. Legacy USB support operates as follows: 1. When you apply power to the computer, legacy support is disabled. 2. POST begins. 3.
Overview of BIOS Features 3.6 BIOS Updates The BIOS can be updated using either of the following utilities, which are available on the Intel World Wide Web site: • • Intel® Express BIOS Update utility, which enables automated updating while in the Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM, or from the file location on the Web.
Intel Desktop Board D945GSEJT Technical Product Specification 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel® Integrator’s Toolkit that is available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo. For information about Refer to Intel Integrator Toolkit http://developer.intel.
Overview of BIOS Features 3.7.3 Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present: • • • Video adapter Keyboard Mouse 3.7.4 Changing the Default Boot Device During POST Pressing the key during POST causes a boot device menu to be displayed.
Intel Desktop Board D945GSEJT Technical Product Specification 3.8 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is the supervisor mode.
4 Board Status and Error Messages 4.1 Front-panel Power LED Blink and Internal Speaker Beep Codes Basic error and status messages are provided through the front-panel power LED blink codes as well as through audible beep codes on systems with an internal speaker connected to the internal speaker header. Blink/beep codes represent their respective messages as shown in Table 39. Table 39. Front-panel Power LED Blink and Internal Speaker Beep Codes Type Pattern CPU Initialization Beep and blink code: 0.
Intel Desktop Board D945GSEJT Technical Product Specification 4.3 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred. Displaying the POST codes requires a PCI bus add-in card, often called a POST card.
Board Status and Error Messages Table 42.
Intel Desktop Board D945GSEJT Technical Product Specification Table 42.
Board Status and Error Messages Table 42.
Intel Desktop Board D945GSEJT Technical Product Specification Table 43.
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel Desktop Board D945GSEJT: • • • • • 5.1.
Intel Desktop Board D945GSEJT Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board D945GSEJT is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive) and 2006/95/EC (Low Voltage Directive).
Regulatory Compliance and Battery Disposal Information Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC & 2006/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC a 2006/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC in 2006/95/EC. Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC & 2006/95/EC. Türkçe Bu ürün, Avrupa Birliği’nin 2004/108/EC ve 2006/95/EC yönergelerine uyar. 5.1.
Intel Desktop Board D945GSEJT Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. Consulte la http://www.intel.
Regulatory Compliance and Battery Disposal Information Russian В качестве части своих обязательств к окружающей среде, в Intel создана программа утилизации продукции Intel (Product Recycling Program) для предоставления конечным пользователям марок продукции Intel возможности возврата используемой продукции в специализированные пункты для должной утилизации. Пожалуйста, обратитесь на веб-сайт http://www.intel.
Intel Desktop Board D945GSEJT Technical Product Specification Table 45. Lead-Free Board Markings Description Mark nd Lead-Free 2 Level Interconnect: This symbol is used to identify electrical and electronic assemblies and components in which the lead (Pb) concentration level in the board substrate and the solder connections from the board to the components (secondlevel interconnect) is not greater than 0.1% by weight (1000 ppm).
Regulatory Compliance and Battery Disposal Information 5.1.4 EMC Regulations Intel Desktop Board D945GSEJT complies with the EMC regulations stated in Table 46 when correctly installed in a compatible host system. Table 46. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Issue 4 Interference-Causing Equipment Standard, Digital Apparatus.
Intel Desktop Board D945GSEJT Technical Product Specification Korean Class B statement translation: this is household equipment that is certified to comply with EMC requirements. You may use this equipment in residential environments and other non-residential environments. 5.1.5 Product Certification Markings (Board Level) Intel Desktop Board D945GSEJT has the product certification markings shown in Table 47: Table 47.
Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRECAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Intel Desktop Board D945GSEJT Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Intel Desktop Board D945GSEJT Technical Product Specification 84
