Intel® NUC Board D54250WYB and Intel® NUC Board D34010WYB Technical Product Specification June 2014 Order Number: H18263-006 Intel® NUC Board D54250WYB and Intel® NUC Board D34010WYB may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Specification Update.
Revision History Revision Revision History Date 001 First release of the Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification September 2013 002 Specification Clarification October 2013 003 Specification Clarification November 2013 004 Specification Clarification March 2014 005 Specification Clarification April 2014 006 Specification Clarification June 2014 Disclaimer This product specification applies to only the standard Intel NUC Board with BIOS ide
Board Identification Information Basic Intel® NUC Board D54250WYB Identification Information AA Revision BIOS Revision Notes H13922-303 WYLPT10H.86A.0021 1,2 Notes: 1. The AA number is found on a small label on the component side of the board. 2.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Specification Changes or Clarifications (continued) Date Type of Change Description of Changes or Clarifications November 2013 Spec Clarification • Updated Section 1.5.1.3 Mini High Definition Multimedia Interface* (Mini HDMI*) • Updated Section 1.5.1.4 Mini DisplayPort* • Updated Section 1.5.1.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for Intel® NUC Board D54250WYB and Intel® NUC Board D34010WYB. Intended Audience The TPS is intended to provide detailed, technical information about Intel NUC Board D54250WYB and Intel NUC Board D34010WYB and their components to the vendors, system integrators, and other engineers and technicians who need this level of information.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Other Common Notation vi # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kb Kilobit (1024 bits) kb/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mb Megabit (1,048,576 bits) Mb/s Megabits per second TDP Thermal Design Power xx
Contents Revision History Disclaimer ................................................................................................ ii Board Identification Information .................................................................. iii Errata ......................................................................................................iv Preface Intended Audience..................................................................................... v What This Document Contains..................
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 2 Technical Reference 2.1 Memory Resources ........................................................................... 37 2.1.1 Addressable Memory ............................................................. 37 2.2 Connectors and Headers .................................................................... 37 2.2.1 Front Panel Connectors .......................................................... 38 2.2.
Contents 5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance ...................................................................... 67 5.1.1 Safety Standards................................................................... 67 5.1.2 European Union Declaration of Conformity Statement ................ 68 5.1.3 EMC Regulations ................................................................... 69 5.1.4 e-Standby and ErP Compliance ...............................................
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. x Header Shown in Figure 10 ................................................................ 39 Connectors and Headers Shown in Figure 10 ........................................ 41 PCI Express Full-/Half-Mini Card Connector .......................................... 42 Dual-Port Front Panel USB 2.0 Header .................
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of Intel NUC Board D54250WYB and Intel NUC Board D34010WYB. Table 1. Feature Summary Form Factor 4.0 inches by 4.0 inches (101.60 millimeters by 101.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Table 1.
Product Description 1.1.2 Board Layout (Top) Figure 1 shows the location of the major components on the top-side of Intel NUC Board D54250WYB and Intel NUC Board D34010WYB. Figure 1.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Table 2 lists the components identified in Figure 1. Table 2. Components Shown in Figure 1 14 Item from Figure 1 Description A Battery B Custom Solutions header (2.
Product Description 1.1.3 Board Layout (Bottom) Figure 2 shows the location of the major components on the bottom-side of Intel NUC Board D54250WYB and Intel NUC Board D34010WYB. Figure 2.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Table 3. Components Shown in Figure 2 16 Item from Figure 2 Description A Back panel connectors B PCI Express Full-Mini Card connector C PCI Express Half-Mini Card connector D SATA 6.0 Gb/s connector E Front panel dual-port USB 2.0 header (2.0 mm pitch) F Front panel USB 3.0 connector G Front panel USB 3.0 connector H Front panel header (2.
Product Description 1.1.4 Block Diagram Figure 3 is a block diagram of the major functional areas of the board. Figure 3.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.2 Online Support To find information about… Visit this World Wide Web site: Intel NUC Board D54250WYB and Intel NUC Board D34010WYB http://www.intel.com/NUC Intel NUC Board Support http://www.intel.com/NUCSupport Available configurations for Intel NUC Board D54250WYB and Intel NUC Board D34010WYB http://ark.intel.com BIOS and driver updates http://downloadcenter.intel.com Tested memory http://www.intel.
Product Description 1.4 System Memory The board has two 204-pin SO-DIMM sockets and support the following memory features: • • • • • • • • 1.35 V DDR3L SDRAM SO-DIMMs with gold plated contacts Two independent memory channels with interleaved mode support Unbuffered, single-sided or double-sided SO-DIMMs 16 GB maximum total system memory (with 4 Gb memory technology). Refer to Section 2.1.1 on page 37 for information on the total amount of addressable memory.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.4.1 Memory Configurations The processor supports the following types of memory organization: • • Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both SO-DIMM channels are equal.
Product Description 1.5 Processor Graphics Subsystem The board supports graphics through Intel HD Graphics. 1.5.1 Integrated Graphics The board supports integrated graphics via the processor. Intel® High Definition (Intel® HD) Graphics 1.5.1.1 The Intel HD graphics controller features the following: • 3D Features DirectX* 11 support • • • • • • • • • OpenGL* 4.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.5.1.3 Mini High Definition Multimedia Interface* (Mini HDMI*) The Mini High-Definition Multimedia Interface (Mini HDMI) is provided for transmitting uncompressed digital audio and video signals to television sets, projectors and other video displays. It can carry high quality multi-channel audio data and all standard and high-definition consumer electronics video formats.
Product Description 1.5.1.4.1 DisplayPort 1.2 Multi-Stream Transport Daisy-Chaining Table 5 lists the maximum resolutions available when using DisplayPort 1.2 Multi-Stream Transport. Table 5. DisplayPort Multi-Streaming Resolutions DisplayPort Usage Models Monitor 1 Monitor 2 Monitor 3 3 Monitors 1920 x 1200 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 2 Monitors 2560 x 1600 @ 60 Hz 2560 x 1600 @ 60 Hz 3 Monitors (with DisplayPort 1.2 hub) 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1.5.1.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.5.1.7 Integrated Audio Provided by the Mini HDMI and Mini DisplayPort Interfaces The Mini HDMI and Mini DisplayPort interfaces from the PCH support audio. The processor supports two High Definition audio streams on two digital ports simultaneously. Table 7 shows the specific audio technologies supported by the PCH. Table 7.
Product Description 1.7 SATA Interface The board provides the following SATA interfaces: • • One internal mSATA port (PCI Express Full-Mini Card) for SSD support One SATA 6.0 Gb/s port (blue) The PCH provides independent SATA ports with a theoretical maximum transfer rate of 6 Gb/s. A point-to-point interface is used for host to device connections. 1.7.1 AHCI Mode The board supports AHCI storage mode. NOTE In order to use AHCI mode, AHCI must be enabled in the BIOS.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.8 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.
Product Description 1.9.1 Audio Subsystem Software Audio software and drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining Audio software and drivers http://downloadcenter.intel.com 1.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.10.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 6). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 6. LAN Connector LED Locations Table 8 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 8.
Product Description 1.11 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including thermal and voltage monitoring. For information about Refer to Wired for Management (WfM) Specification www.intel.com/design/archives/wfm/ 1.11.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.11.3 Thermal Solution Figure 7 shows the location of the thermal solution and processor fan header. Item Description A Processor fan header B Thermal solution Figure 7.
Product Description 1.12 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support: Power Input Instantly Available PC technology LAN wake capabilities Wake from USB WAKE# signal wake-up support Wake from S5 Wake from CIR +5 V Standby Power Indicator LED 1.12.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.12.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off.
Product Description 1.12.1.2 Wake-up Devices and Events Table 11 lists the devices or specific events that can wake the computer from specific states. Table 11. Wake-up Devices and Events Devices/events that wake up the system… …from this sleep state Power switch S3, S4, S5 RTC alarm S3, S4, S5 LAN S3, S4, S5 USB S3 WAKE# S3, S4, S5 Consumer IR S3, S4, S5 (Note 1) (Note 1) (Note 1) (Note 2) (Note 1) (Note 3) Notes: 1. S4 implies operating system support only. 2.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 1.12.2.1 Power Input When resuming from an AC power failure, the computer returns to the power state it was in before power was interrupted (on or off). The computer’s response can be set using the Last Power State feature in the BIOS Setup program’s Boot menu.
Product Description 1.12.2.7 Wake from Consumer IR CIR activity wakes the computer from an ACPI S3, S4, or S5 state. 1.12.2.8 +5 V Standby Power Indicator LED The standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 8 shows the location of the standby power LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 36
2 Technical Reference 2.1 Memory Resources 2.1.1 Addressable Memory The board utilizes 32 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory).
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification This section describes the board’s connectors and headers. The connectors and headers can be divided into these groups: • • • 2.2.1 Front panel I/O connectors Back panel I/O connectors On-board I/O connectors and headers (see pages 39 and 40) Front Panel Connectors Figure 9 shows the location of the front panel connectors for the board. Item Description A Front panel stereo microphone/ headphone jack USB 3.
Technical Reference 2.2.3 Header (Top) Figure 11 shows the location of the header on the top-side of the board. Figure 11. Header (Top) Table 12 lists the header identified in Figure 11. Table 12. Header Shown in Figure 11 Item from Figure 12 Description A Custom Solutions header (2.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 2.2.4 Connectors and Headers (Bottom) Figure 12 shows the locations of the connectors and headers on the bottom-side of the board. Figure 12.
Technical Reference Table 13 lists the connectors and headers identified in Figure 10. Table 13. Connectors and Headers Shown in Figure 10 Item from Figure 10 Description A PCI Express Full-Mini Card connector B PCI Express Half-Mini Card connector C SATA 6.0 Gb/s connector through the PCH D Front panel dual-port USB 2.0 header (2.0 mm pitch) E Front panel header (2.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 2.2.4.1 Signal Tables for the Connectors and Headers Table 14. PCI Express Full-/Half-Mini Card Connector Pin Signal Name 1 WAKE# 2 3.3 V 3 Reserved 4 GND 5 Reserved 6 1.5 V 7 CLKREQ# 8 Reserved 9 GND 10 Reserved 11 REFCLK- 12 Reserved 13 REFCLK+ 14 Reserved 15 GND 16 Reserved 17 Reserved 18 GND 19 Reserved 20 Reserved 21 GND 22 PERST# 23 PERn0 24 +3.
Technical Reference Table 14. PCI Express Full-/Half-Mini Card Connector (continued) Pin Signal Name Additional Signal Name 39 +3.3 Vaux (mSATA) Vendor 40 GND 41 +3.3 Vaux 42 LED_WWAN# 43 Reserved 44 LED_WLAN# 45 Reserved 46 LED_WPAN# 47 Reserved 48 +1.5V 49 Reserved 50 GND 51 Reserved 52 +3.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Table 17. SATA Power Connector Pin Signal Name 1 3.3 V DC 2 3.3 V DC 3 3.3 V DC 4 Ground 5 Ground 6 Ground 7 5 V DC 8 5 V DC 9 5 V DC 10 Ground 11 Ground 12 Ground 13 N/A 14 N/A 15 N/A Table 18. System ID / Custom Solutions Header (2.0 mm Pitch) Pin Signal Name Pin Signal Name 1 Prog_LED 2 GND 3 HDMI_CEC 4 DMIC_CLK 5 3.
Technical Reference 2.2.4.3 Power Supply Connectors The board has the following power supply connectors: • External Power Supply – the board can be powered through a 12-19 V DC connector on the back panel. The back panel DC connector is compatible with a 5.5 mm/OD (outer diameter) and 2.5 mm/ID (inner diameter) plug, where the inner contact is +12-19 (±10%) V DC and the shell is GND. The maximum current rating is 10 A.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Figure 13. Connection Diagram for Front Panel Header (2.0 mm Pitch) 2.2.4.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires a SATA hard drive or optical drive connected to an onboard SATA connector. 2.2.4.4.
Technical Reference 2.2.4.4.4 Power Switch Header Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another on/off signal. 2.2.4.5 System ID / Custom Solutions Header (2.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 2.2.4.6 Internal USB 2.0 Dual-Port Header (2.0 mm Pitch) Figure 14 is a connection diagram for the internal USB header. NOTE • • The +5 V DC power on the USB header is fused. Use only an internal USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 14. Connection Diagram for Internal USB 2.0 Dual-Port Header (2.0 mm Pitch) 2.2.4.
Technical Reference 2.3 BIOS Security Jumper CAUTION Do not move a jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 16 shows the location of the BIOS Security Jumper. The 3-pin jumper determines the BIOS Security program’s mode. Table 22 describes the jumper settings for the three modes: normal, lockdown, and configuration. Figure 16.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Table 22 lists the settings for the jumper. Table 22. BIOS Security Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Lockdown 2-3 The BIOS uses current configuration information and passwords for booting, except: • All POST Hotkeys are suppressed (prompts are not displayed and keys are not accepted.
Technical Reference 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into a custom chassis. Figure 17 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 4.0 inches by 4.0 inches [101.60 millimeters by 101.60 millimeters]. Figure 17.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Figure 18 shows the height dimensions of the board. Figure 18. Board Height Dimensions 2.5 2.5.1 Electrical Considerations Power Supply Considerations CAUTION The external 12-19 V DC jack is the primary power input connector of Intel NUC Board D54250WYB and Intel NUC Board D34010WYB.
Technical Reference 2.5.2 Fan Header Current Capability Table 23 lists the current capability of the fan headers. Table 23. Fan Header Current Capability 2.6 Fan Header Maximum Available Current Processor fan .25 A Thermal Considerations CAUTION A chassis with a maximum internal ambient temperature of 50 oC at the processor fan inlet is recommended.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Figure 19 shows the locations of the localized high temperature zones. Item Description A B Processor voltage regulator area Thermal solution Figure 19.
Technical Reference Table 24 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the board. Table 24.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Telcordia SR-332 Issue 2, Method I, Case 3, 55 ºC ambient. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF for Intel NUC Board D54250WYB and Intel NUC Board D34010WYB is 66,640 hours. 2.
3 Overview of BIOS Features 3.1 Introduction The board uses a Intel Visual BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the Visual BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as WYLPT10H.86A.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 3.2 BIOS Flash Memory Organization The Serial Peripheral Interface Flash Memory (SPI Flash) includes a 64 Mb (8192 KB) flash memory device. 3.3 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network.
Overview of BIOS Features 6. After the operating system loads the USB drivers, all legacy and non-legacy USB devices are recognized by the operating system, and Legacy USB support from the BIOS is no longer used. 7. Additional USB legacy feature options can be access by using Intel® Integrator Toolkit. To install an operating system that supports USB, verify that Legacy USB support in the BIOS Setup program is set to Enabled and follow the operating system’s installation instructions. 3.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 3.5.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel Integrator’s Toolkit that is available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo.
Overview of BIOS Features 3.7 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second, removable drive third, and the network fourth. 3.7.1 Network Boot The network can be selected as a boot device. This selection allows booting from the onboard LAN or a network add-in card with a remote boot ROM installed.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 3.7.4 Power Button Menu As an alternative to Back-to-BIOS Mode or normal POST Hotkeys, the user can use the power button to access a menu. The Power Button Menu is accessible via the following sequence: 1. System is in S4/S5 (Not G3) 2. User pushes the power button and holds it down 3. The system will emit three short beeps from the PC speaker, then stop to signal the user to release the power button 4.
Overview of BIOS Features 3.8 Hard Disk Drive Password Security Feature The Hard Disk Drive Password Security feature blocks read and write accesses to the hard disk drive until the correct password is given. Hard Disk Drive Passwords are set in BIOS SETUP and are prompted for during BIOS POST. For convenient support of S3 resume, the system BIOS will automatically unlock drives on resume from S3. Valid password characters are A-Z, a-z, and 0-9. Passwords may be up to 19 characters in length.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 3.9 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program.
4 Error Messages and Blink Codes 4.1 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s front panel power LED to blink an error message describing the problem (see Table 31). Table 31. Front-panel Power LED Blink Codes Type Pattern Note BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds. The pattern repeats until the BIOS update is complete. Video error (Note) On-off (1.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 66
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel NUC Board D54250WYB and Intel NUC Board D34010WYB: • • • • • 5.1.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 5.1.
Regulatory Compliance and Battery Disposal Information Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC, 2006/95/EC & 2002/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC, 2006/95/EC a 2002/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC, 2006/95/EC in 2002/95/EC.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Regulatory Compliance and Battery Disposal Information Japan VCCI Statement Japan VCCI Statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 5.1.
Regulatory Compliance and Battery Disposal Information 5.1.5 Regulatory Compliance Marks (Board Level) Intel NUC Board D54250WYB and Intel NUC Board D34010WYB have the regulatory compliance marks shown in Table 35. Table 35. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel NUC: E210882. FCC Declaration of Conformity logo mark for Class B equipment. CE mark.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Regulatory Compliance and Battery Disposal Information 77
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification 78
