Intel® NUC Board NUC5i5MYBE Technical Product Specification January 2015 Order Number: H67541-001 Intel® NUC Board NUC5i5MYBE may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata, if any, are documented in Intel NUC Board NUC5i5MYBE Specification Update.
Revision History Revision Revision History Date 001 First release of the Intel NUC Board NUC5i5MYBE Technical Product Specification January 2015 Disclaimer This product specification applies to only the standard Intel NUC Board with BIOS identifier MYHSWi5v.86A. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
Board Identification Information Basic Intel® NUC Board NUC5i5MYBE Identification Information AA Revision BIOS Revision Notes H47797-202 MYBDWi5v.86A.0012 1,2 Notes: 1. The AA number is found on a small label on the component side of the board. 2.
Intel NUC Board NUC5i5MYBE Technical Product Specification Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for Intel® NUC Board NUC5i5MYBE. Intended Audience The TPS is intended to provide detailed, technical information about Intel NUC Board NUC5i5MYBE and its components to the vendors, system integrators, and other engineers and technicians who need this level of information.
Other Common Notation # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kb Kilobit (1024 bits) kb/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mb Megabit (1,048,576 bits) Mb/s Megabits per second TDP Thermal Design Power xxh An address or data value ending with a lowercase h indicates a hexadecimal value. x.
Intel NUC Board NUC5i5MYBE Technical Product Specification vi
Contents Revision History Disclaimer .................................................................................................................................................................. ii Board Identification Information..................................................................................................................... iii Errata.....................................................................................................................................................
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.12 Power Management ................................................................................................................................ 35 1.12.1 ACPI ............................................................................................................................................. 35 1.12.2 Hardware Support .................................................................................................................
Contents 4 Error Messages and Blink Codes 4.1 4.2 Front-panel Power LED Blink Codes ................................................................................................ 81 BIOS Error Messages............................................................................................................................... 81 5 Regulatory Compliance and Battery Disposal Information 5.1 5.2 Regulatory Compliance.......................................................................................
Intel NUC Board NUC5i5MYBE Technical Product Specification 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. x Supported Memory Configurations .................................................................................................. 19 DisplayPort Multi-Streaming Resolutions......................................................................................
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of Intel® NUC Board NUC5i5MYBE. Table 1. Feature Summary Form Factor 4.0 inches by 4.0 inches (101.60 millimeters by 101.
Intel NUC Board NUC5i5MYBE Technical Product Specification Table 1. Feature Summary (continued) Expansion Capabilities • One M.2 Module supporting M.2 2242 and M.2 2280 cards (key type B) • One M.2 Module supporting M.
Product Description 1.1.2 Board Layout (Top) Figure 1 shows the location of the major components on the top-side of Intel NUC Board NUC5i5MYBE. Figure 1.
Intel NUC Board NUC5i5MYBE Technical Product Specification Table 2 lists the components identified in Figure 1. Table 2. Components Shown in Figure 1 14 Item from Figure 1 Description A Molex Micro-Fit 3.0* 2x2 power connector (3 mm pitch) B Thermal solution C Low Speed Custom Solutions Header D Battery E Processor fan header F Onboard power button G Power LED H Hard Disk Drive LED I Standby Power LED J Front panel header (2.
Product Description 1.1.3 Board Layout (Bottom) Figure 2 shows the location of the major components on the bottom-side of Intel NUC Board NUC5i5MYBE. Figure 2.
Intel NUC Board NUC5i5MYBE Technical Product Specification Table 3. Components Shown in Figure 2 16 Item from Figure 2 Description A Back panel connectors B Backlight inverter voltage selection header C High Speed Custom Solutions connector (PCIe x4, SATA) D Serial port header E M.2 2230 Module connector F SATA power connector G M.2 2280 Module connector H Front panel dual-port USB 2.0 header (1.25 mm pitch) I Front panel USB 3.
Product Description 1.1.4 Block Diagram Figure 3 is a block diagram of the major functional areas of the board. Figure 3.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.2 Online Support To find information about… Visit this World Wide Web site: Intel NUC Board NUC5i5MYBE http://www.intel.com/NUC Intel NUC Board Support http://www.intel.com/NUCSupport Available configurations for Intel NUC Board NUC5i5MYBE http://ark.intel.com BIOS and driver updates http://downloadcenter.intel.com Tested memory http://www.intel.com/NUCSupport Integration information http://www.intel.
Product Description 1.4 System Memory The board has two 204-pin SO-DIMM sockets and supports the following memory features: • • • • • • • • 1.35 V DDR3L SDRAM SO-DIMMs with gold plated contacts Two independent memory channels with interleaved mode support Unbuffered, single-sided or double-sided SO-DIMMs 16 GB maximum total system memory (with 4 Gb memory technology). Refer to Section 2.1.1 on page 45 for information on the total amount of addressable memory.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.4.1 Memory Configurations The processor supports the following types of memory organization: • • Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both SO-DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be equal.
Product Description 1.5 Processor Graphics Subsystem The board supports graphics through Intel HD Graphics 5500. 1.5.1 Integrated Graphics The board supports integrated graphics via the processor. 1.5.1.1 Intel® High Definition (Intel® HD) Graphics The Intel HD Graphics 5500 controller features the following: • 3D Features • DirectX* 11 support OpenGL* 4.
Intel NUC Board NUC5i5MYBE Technical Product Specification DisplayPort output supports Multi-Stream Transport (MST) which allows for multiple independent video streams (daisy-chain connection with multiple monitors) over a single DisplayPort. This will require the use of displays that support DisplayPort 1.2 and allow for this feature. For information about Refer to DisplayPort technology http://www.displayport.org 1.5.1.3.1 DisplayPort 1.
Product Description 1.5.1.5 High-bandwidth Digital Content Protection (HDCP) HDCP is the technology for protecting high definition content against unauthorized copy or interception between a source (computer, digital set top boxes, etc.) and the sink (panels, monitor, and TVs). The PCH supports HDCP 1.4a for content protection over wired displays (Mini DisplayPort). 1.5.1.6 Integrated Audio Provided by the Mini DisplayPort Interfaces The Mini DisplayPort interfaces, from the PCH, support audio.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.5.1.7 Flat Panel Display Interfaces The board supports flat panel displays via the Embedded DisplayPort interface. Figure 5 shows the flat panel connector on the bottom-side of the board. Item Description A Backlight inverter voltage selection header Figure 5. Flat Panel Connector on Bottom-side of the Board Table 8. Backlight Inverter Voltage Selection Header Jumper Positions 5 Vsby ± 5% (2.0A) (Vin) 19V ± 5% (2.
Product Description Figure 6 shows the flat panel connectors on the top-side of the board. Item Description A Flat panel voltage selection header B Embedded DisplayPort connector Figure 6.
Intel NUC Board NUC5i5MYBE Technical Product Specification Table 9. Flat Panel Voltage Selection Header Jumper Positions 3.3 Vsby ± 5% (1.3A) 5 Vsby ± 5% (2.0A) (Vin) 19V ± 5% (2.0A) 1.5.1.7.1 Embedded DisplayPort* (eDP) Interface The Embedded DisplayPort (eDP) flat panel display interface supports the following: • • • • • • • 2880 x 1800 @ 60 Hz resolution 1-lane and 2-lane bandwidth at 1.62 Gb/s or 2.7 Gb/s Multiple EDID data source capability (panel, predefined, and custom payloads) 3.
Product Description In addition, BIOS setup provides the following configuration parameters for internal flat panel displays: • • • • • • Color Depth: allows the system integrator to select whether the panel is 24 bpp with VESA or JEIDA color mapping, or 18 bpp. eDP Interface Type: allows the system integrator to select whether the eDP panel is a 1-lane or 2-lane display. eDP Data Rate: allows the system integrator to select whether the eDP panel runs at 1.62 Gb/s or 2.7 Gb/s.
Intel NUC Board NUC5i5MYBE Technical Product Specification For information about Refer to The location of the USB connectors on the back panel Figure 9, page 46 The location of the front panel USB headers Figure 2, page 15 1.7 SATA Interface The board provides the following SATA interfaces: • • One internal M.2 SATA port (Type 2242 and Type 2280 Modules) for SSD support One SATA 6.0 Gb/s port (blue) The PCH provides independent SATA ports with a theoretical maximum transfer rate of 6 Gb/s.
Product Description 1.7.2 AHCI Mode The board supports AHCI storage mode. NOTE In order to use AHCI mode, AHCI must be enabled in the BIOS. Microsoft* Windows* 7 and Windows 8.1 include the necessary AHCI drivers without the need to install separate AHCI drivers during the operating system installation process; however, it is always good practice to update the AHCI drivers to the latest available by Intel. 1.7.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.8 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied via the power supply 5 V STBY rail.
Product Description NOTE The analog circuit of the front panel audio connector is designed to power headphones or amplified speakers only. Poor audio quality occurs if passive (nonamplified) speakers are connected to this output. 1.9.1 Audio Subsystem Software Audio software and drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining Audio software and drivers http://downloadcenter.intel.com 1.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.10.2 LAN Subsystem Software LAN software and drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining LAN software and drivers http://downloadcenter.intel.com 1.10.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 8). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 8.
Product Description 1.11 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including thermal and voltage monitoring. For information about Refer to Wired for Management (WfM) Specification www.intel.com/design/archives/wfm/ 1.11.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.11.3 Thermal Solution Figure 9 shows the location of the thermal solution and processor fan header. Item Description A Processor fan header B Thermal solution Figure 9.
Product Description 1.12 Power Management Power management is implemented at several levels, including: • • 1.12.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.12.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off.
Product Description 1.12.1.2 Wake-up Devices and Events Table 15 lists the devices or specific events that can wake the computer from specific states. Table 15.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.12.2.1 Power Input When resuming from an AC power failure, the computer returns to the power state it was in before power was interrupted (on or off). The computer’s response can be set using the Last Power State feature in the BIOS Setup program’s Boot menu. 1.12.2.2 Instantly Available PC Technology Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-to-RAM) sleep-state.
Product Description 1.12.2.7 +5 V Standby Power Indicator LED The standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 10 shows the location of the standby power LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. Figure 10.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.13 Intel® Security and Manageability Technologies Intel® Security and Manageability Technologies provides tools and resources to help small business owners and IT organizations protect and manage their assets in a business or institutional environment. NOTE Software with security and/or manageability capability is required to take advantage of Intel platform security and/or management technologies. 1.13.
Product Description NOTE Intel AMT requires the computer system to have an Intel AMT-enabled chipset, network hardware and software, as well as connection with a power source, a corporate network connection, and an Intel AMT-enabled remote management console. Setup requires additional configuration of the platform. For information about Refer to Intel Active Management Technology http://www.intel.com/technology/platform-technology/intelamt/index.htm 1.13.1.
Intel NUC Board NUC5i5MYBE Technical Product Specification 1.13.1.4 Intel® Trusted Execution Technology Intel Trusted Execution Technology (Intel TXT) is a hardware security solution that protects systems against software-based attacks by validating the behavior of key components at startup against a known good source. It requires that Intel VT be enabled and the presence of a TPM. For information about Refer to Intel Trusted Execution Technology http://www.intel.
Product Description 1.13.2 Intel® Small Business Technology Intel Small Business Technology (Intel SBT) provides small businesses with security and productivity capabilities to help keep their PCs up-to-date, protected and running well. Intel SBT is the firmware component of Intel® Small Business Advantage (Intel® SBA) and includes this hardware functionality: • • Local Maintenance Timer – Enables applications to “wake-up” the host platform when it is powered down or in a sleep state.
Intel NUC Board NUC5i5MYBE Technical Product Specification 44
2 Technical Reference 2.1 Memory Resources 2.1.1 Addressable Memory The board utilizes 16 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory).
Intel NUC Board NUC5i5MYBE Technical Product Specification This section describes the board’s connectors and headers. The connectors and headers can be divided into these groups: • • • Front panel I/O connectors Back panel I/O connectors On-board I/O connectors and headers (see pages 47 and 48) NOTE Unless otherwise noted, all 2.0 mm headers are dual-row, straight, surface mount with each twopin section measuring 2.0 mm x 4.0 mm, with a pin height of 4.0 mm. 2.2.
Technical Reference 2.2.3 Headers (Top) Figure 13 shows the location of the headers on the top-side of the board. Figure 13. Headers (Top) Table 16 lists the headers identified in Figure 13. Table 16. Headers Shown in Figure 13 Item from Figure 14 Description A Low Speed Custom Solutions Header B Processor fan header C Front panel header (2.
Intel NUC Board NUC5i5MYBE Technical Product Specification 2.2.4 Connectors and Headers (Bottom) Figure 14 shows the locations of the connectors and headers on the bottom-side of the board. Figure 14.
Technical Reference Table 17 lists the connectors and headers identified in Figure 10. Table 17. Connectors and Headers Shown in Figure 10 Item from Figure 10 Description A Backlight inverter voltage selection header B High Speed Custom Solutions connector (PCIe x4, SATA) C Serial port header D M.2 2230 Module connector E SATA power connector (1.25 mm pitch) F M.2 2280 Module connector G Front panel dual-port USB 2.0 header (1.
Intel NUC Board NUC5i5MYBE Technical Product Specification 2.2.4.1 Signal Tables for the Connectors and Headers Table 18. SATA Power Header (1.25 mm pitch) Pin Signal Name 1 5V 2 5V 3 3.3 V 4 GND 5 GND NOTE Connector is Molex part number 53398-0571, 1.25mm Pitch PicoBlade* Header, Surface Mount, Vertical, Lead-Free, 5 Circuits. Table 19. Dual-Port Internal USB 2.0 Header (1.
Technical Reference Table 20. M.2 2280 Module (Mechanical Key B) (continued) Pin Signal Name Pin Signal Name 54 PEWAKE# (I/O)(0/3.3V) 55 REFCLKP 52 CLKREQ# (I/O)(0/3.3V) 53 REFCLKN 50 PERST# (O)(0/3.
Intel NUC Board NUC5i5MYBE Technical Product Specification Table 21. M.2 2230 Module (Mechanical Key E) Connector (continued) 52 Pin Signal Name Pin Signal Name 60 I2C CLK (O)(0/3.3) 61 RESERVED 58 I2C DATA (I/O)(0/3.3) 59 RESERVED 56 W_DISABLE1# (O)(0/3.3V) 57 GND 54 W_DISABLE2# (O)(0/3.3V) 55 PEWAKE0# (I/O)(0/3.3V) 52 PERST0# (O)(0/3.3V) 53 CLKREQ0# (I/O)(0/3.3V) 50 SUSCLK(32kHz) (O)(0/3.
Technical Reference Table 22.
Intel NUC Board NUC5i5MYBE Technical Product Specification Table 25. Low Speed Custom Solutions Header Pin Signal Name Pin Signal Name 1 Reserved 2 GND 3 HDMI_CEC 4 DMIC_CLK 5 3.3 Vsby ± 5% (1.3A) 6 DMIC_DATA 7 Key (no pin) 8 SMB_ALERT# 9 5 Vsby ± 5% (2.0A) 10 SCI_SMI_GPIO 11 GPIO 12 GPIO 13 I2C0_CLK 14 I2C0_DATA 15 I2C1_CLK (shared w/M.2) 16 I2C1_DATA (shared w/M.2) 17 SMB_CLK 18 SMB_DATA Table 26.
Technical Reference Table 26. High Speed Custom Solutions Connector (PCIe x 4, SATA) (continued) Pin Signal 26 GND 27 PERp5_L1 28 PERn5_L1 29 GND 30 PETp5_L1 31 PETn5_L1 32 GND 33 PERp5_L0 34 PERn5_L0 35 GND 36 PETp5_L0 37 PETn5_L0 38 GND 39 REFCLK+ 40 REFCLK- NOTE Connector used is the Kyocera Series 6885 0.4 mm pitch FPC connector, p/n 00 6885 640 000 846. Table 27. NFC Connector Pin Signal Name Descriptive Name 1 +3.3V 3.
Intel NUC Board NUC5i5MYBE Technical Product Specification Table 28. Serial Port Header Pin Signal Name Pin Signal Name 1 DCD (Data Carrier Detect) 2 RXD# (Receive Data) 3 TXD# (Transmit Data) 4 DTR (Data Terminal Ready) 5 GND 6 DSR (Data Set Ready) 7 RTS (Request to Send) 8 CTS (Clear to Send) 9 RI (Ring Indicator) 10 Key (no pin) 2.2.4.2 Add-in Card Connectors The board supports M.2 2230 (key type E) and 2280 (key type B) Modules; also supports M.
Technical Reference Figure 15. Connection Diagram for the Internal Power Supply Connector 2.2.4.3.1 Power Sensing Circuit The board has a power sensing circuit that: • • manages CPU power usage to maintain system power consumption below 65 W is designed for use with 65 W AC-DC adapters NOTE It is recommended that you disable this feature (via BIOS option) when using an AC-DC adapter greater than 65 W. For information about Refer to Power supply considerations Section 2.5.1, page 66 2.2.4.
Intel NUC Board NUC5i5MYBE Technical Product Specification Figure 16. Connection Diagram for Front Panel Header (2.0 mm Pitch) 2.2.4.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires a SATA hard drive or optical drive connected to an onboard SATA connector. 2.2.4.4.
Technical Reference NOTE The LED behavior shown in Table 31 is default – other patterns may be set via BIOS setup. 2.2.4.4.4 Power Switch Header Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another on/off signal. 2.
Intel NUC Board NUC5i5MYBE Technical Product Specification Figure 17. Low Speed Custom Solutions Header 2.2.4.6 High Speed Custom Solutions Connector (0.4 mm Pitch) The High Speed Customs Solution connector is designed to provide access to additional high speed signals. It provides the equivalent of: • • One PCIe x4 port One 6.0 Gbps SATA port The connector used is the Kyocera Series 6885 0.4 mm pitch FPC connector, p/n 00 6885 640 000 846.
Technical Reference 2.2.4.7 Internal USB 2.0 Dual-Port Header (1.25 mm Pitch) Figure 18 is a connection diagram for the internal USB header. Connector is Molex part number 53398-0571, 1.25mm Pitch PicoBlade Header, Surface Mount, Vertical, Lead-Free, 8 Circuits. NOTE • • The +5 V DC power on the USB header is fused. Use only an internal USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 18. Connection Diagram for Internal USB 2.0 Dual-Port Header (1.
Intel NUC Board NUC5i5MYBE Technical Product Specification 2.3 BIOS Security Jumper CAUTION Do not move a jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 19 shows the location of the BIOS Security Jumper. The 3-pin jumper determines the BIOS Security program’s mode. Table 33 describes the jumper settings for the three modes: normal, lockdown, and configuration. Figure 19.
Technical Reference Table 33 lists the settings for the jumper. Table 33. BIOS Security Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Lockdown 2-3 The BIOS uses current configuration information and passwords for booting, except: • All POST Hotkeys are suppressed (prompts are not displayed and keys are not accepted. For example, F2 for Setup, F10 for the Boot Menu).
Intel NUC Board NUC5i5MYBE Technical Product Specification 2.4 Intel® Management Engine BIOS Extension (Intel® MEBX) Reset Header The Intel® MEBX reset header (see Figure 20) allows you to reset the Intel ME configuration to the factory defaults. Momentarily shorting pins 1 and 2 with a jumper (not supplied) will accomplish the following: • • • Return all Intel ME parameters to their default values. Reset the Intel MEBX password to the default value (admin). Unconfigure Intel AMT.
Technical Reference 2.5 Mechanical Considerations 2.5.1 Form Factor The board is designed to fit into a custom chassis. Figure 21 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 4.0 inches by 4.0 inches [101.60 millimeters by 101.60 millimeters]. Figure 21.
Intel NUC Board NUC5i5MYBE Technical Product Specification Figure 22 shows the height dimensions of the board. Figure 22. Board Height Dimensions 2.6 Electrical Considerations 2.6.1 Power Supply Considerations System power requirements will depend on actual system configurations chosen by the integrator, as well as end user expansion preferences.
Technical Reference 2.6.2 Fan Header Current Capability Table 35 lists the current capability of the fan headers. Table 35. Fan Header Current Capability 2.7 Fan Header Maximum Available Current Processor fan .25 A Thermal Considerations CAUTION A chassis with a maximum internal ambient temperature of 50 oC at the processor fan inlet is recommended.
Intel NUC Board NUC5i5MYBE Technical Product Specification Figure 23 shows the locations of the localized high temperature zones. Item Description A Processor voltage regulator area B Thermal solution Figure 23.
Technical Reference A thermal pad has been installed for the bottom of the chassis to improve the thermal performance when using M.2 devices that operate at higher temperatures. If the thermal pad ever needs to be replaced, Figure 23 shows the installation area of the thermal pad. Item Description A Thermal Pad B Thermal Pad Installation Area Figure 24.
Intel NUC Board NUC5i5MYBE Technical Product Specification Table 36 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the board. Table 36.
Technical Reference 2.8 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Telcordia SR-332 Issue 2, Method I, Case 3, 55 ºC ambient. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF for Intel NUC Board NUC5i5MYBE is 61,825 hours. 2.9 Environmental Table 38 lists the environmental specifications for the board. Table 38.
Intel NUC Board NUC5i5MYBE Technical Product Specification 72
3 Overview of BIOS Features 3.1 Introduction The board uses Intel Visual BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the Visual BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as MYHSWi5v.86A.
Intel NUC Board NUC5i5MYBE Technical Product Specification 3.2 BIOS Flash Memory Organization The Serial Peripheral Interface Flash Memory (SPI Flash) includes a 128 Mb flash memory device. 3.3 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components.
Overview of BIOS Features To install an operating system that supports USB, verify that Legacy USB support in the BIOS Setup program is set to Enabled and follow the operating system’s installation instructions. 3.5 BIOS Updates The BIOS can be updated using one of the following methods: • • • • Intel® Express BIOS Update utility, which enables automated updating while in the Windows environment.
Intel NUC Board NUC5i5MYBE Technical Product Specification 3.5.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel Integrator’s Toolkit that is available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo. For information about Refer to Intel Integrator Toolkit http://developer.intel.
Overview of BIOS Features 3.7 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second, removable drive third, and the network fourth. 3.7.1 Network Boot The network can be selected as a boot device. This selection allows booting from the onboard LAN or a network add-in card with a remote boot ROM installed.
Intel NUC Board NUC5i5MYBE Technical Product Specification 3.7.4 Power Button Menu As an alternative to Back-to-BIOS Mode or normal POST Hotkeys, the user can use the power button to access a menu. The Power Button Menu is accessible via the following sequence: 1. System is in S4/S5 (Not G3) 2. User pushes the power button and holds it down for 3 seconds 3. The system will emit three short beeps from the Front Panel (FP) audio port, then stop to signal the user to release the power button.
Overview of BIOS Features 3.8 Hard Disk Drive Password Security Feature The Hard Disk Drive Password Security feature blocks read and write accesses to the hard disk drive until the correct password is given. Hard Disk Drive Passwords are set in BIOS SETUP and are prompted for during BIOS POST. For convenient support of S3 resume, the system BIOS will automatically unlock drives on resume from S3. Valid password characters are A-Z, a-z, and 0-9. Passwords may be up to 19 characters in length.
Intel NUC Board NUC5i5MYBE Technical Product Specification 3.9 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is the supervisor mode.
4 Error Messages and Blink Codes 4.1 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s front panel power LED to blink an error message describing the problem (see Table 43). Table 43. Front-panel Power LED Blink Codes Type Pattern Note BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds. The pattern repeats until the BIOS update is complete. Video error (Note) On-off (1.
Intel NUC Board NUC5i5MYBE Technical Product Specification 82
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel NUC Board NUC5i5MYBE: • • • • • Safety standards European Union Declaration of Conformity statement Product Ecology statements Electromagnetic Compatibility (EMC) standards Product certification markings 5.1.
Intel NUC Board NUC5i5MYBE Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the products Intel® NUC Board NUC5i5MYBE is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2011/65/EU (ROHS Directive).
Regulatory Compliance and Battery Disposal Information Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC, 2006/95/EC & 2002/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC, 2006/95/EC a 2002/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC, 2006/95/EC in 2002/95/EC.
Intel NUC Board NUC5i5MYBE Technical Product Specification FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N.E.
Regulatory Compliance and Battery Disposal Information Japan VCCI Statement Japan VCCI Statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Intel NUC Board NUC5i5MYBE Technical Product Specification 5.1.4 e-Standby and ErP Compliance Intel NUC Board NUC5i5MYBE meets the following program requirements in an adequate system configuration, including appropriate selection of an efficient power supply: • • • 88 EPEAT* Korea e-Standby European Union Energy-related Products Directive 2013 (ErP) Lot 6 For information about Refer to Electronic Product Environmental Assessment Tool (EPEAT) http://www.epeat.
Regulatory Compliance and Battery Disposal Information 5.1.5 Regulatory Compliance Marks (Board Level) Intel NUC Board NUC5i5MYBE has the regulatory compliance marks shown in Table 47. Table 47. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel NUC: E210882. FCC Declaration of Conformity logo mark for Class B equipment. CE mark.
Intel NUC Board NUC5i5MYBE Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Intel NUC Board NUC5i5MYBE Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Regulatory Compliance and Battery Disposal Information 93
Intel NUC Board NUC5i5MYBE Technical Product Specification 94
