Intel Declaration of Conformity

IDoC Template 11 February, 2009
No. K003
Revision 01
Declaration of Conformity
Equipment Type: Intel® NUC – xDCCP847DYEx
The equipment described above is declared to be in conformity with the following applicable national and international standards. The conformity is
valid ONLY when the equipment is used in a manner consistent with the manufacturer’s specifications and the reference documents.
Document no. / Edition / Date of Issue Title
IEC 60950-1:2005 + A1:2012 Information Technology Equipment – Safety – Part 1: General Requirements
UL 60950-1, 2
nd
Edition, 2011-12-19 Information Technology Equipment – Safety – Part 1: General Requirements
CSA C22.2 No. 60950-1-07, 2
nd
Edition, 2011-12 Information Technology Equipment – Safety – Part 1: General Requirements
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 Information Technology Equipment – Safety – Part 1: General Requirements
AS/NZS 60950.1: 2003
Information Technology Equipment – Safety – Part 1: General Requirements
FCC, 47 CFR Part 15, Class B digital device Radio Frequency Devices – 47 CFR Part 15, Subpart B - Unintentional Radiators
ICES-003 Issue 5, Class B Interference-Causing Equipment Standards - Digital Apparatus
EN 55022: 2010, Class B Information Technology Equipment - Radio Disturbance Characteristics
EN 55024: 2010, Class B Information Technology Equipment - Immunity Characteristics
CISPR 22: 2008, Class B Information Technology Equipment - Radio Disturbance Characteristics
KN-22:2009, Class B Information Technology Equipment - Radio Disturbance Characteristics
KN-24:2011, Class B Information Technology Equipment - Immunity Characteristics
VCCI V-3 2012.04 / V-4 2012.04 Class B Voluntary Control Council For Interference By Information Technology Equipment
CNS 13438:2006 (Full Edition) Class B Information Technology Equipment - Radio Disturbance Characteristics
EN 50581:2012
Technical Documentation for the Assessment of Electrical and Electronic Products
with respect to the Restriction of Hazardous Substances
Additional information:
Manufactured in China. See contact information below.
Regions and Regulatory Markings for which Conformity is Declared:
European Economic Area (EEA) : Intel Corporation (address below) declares the equipment in compliance with the essential requirements of EC
Council Directives: 2006/95/EC - Safety/LVD, 2004/108/EC – EMC and that the equipment is labelled in compliance with Council Directives
2002/96/EC (WEEE) and 2006/66/EC (Batteries). 2011/65/EU - RoHS CE marking affixed for the first time: 13
USA : Intel Corporation (address below) make this SDoC as Responsible Party for equipment.
Canada: Intel Corporation (address below) is the Declaring Party for equipment.
Japan: Voluntary Control for Interference by Information Technology Equipment (VCCI) member number 338.
Australia / New Zealand: Supplier Code N-232 [Intel Australia Pty Ltd, 111 Pacific Highway, North Sydney, NSW 2060]: ABN 59 001 798 214:
ACN: 001 798 214
Any other region where the Regulatory Requirements are satisfied by compliance to the standards declared above.
This Declaration of Conformity is issued under the sole responsibility of the manufacturer
Place of Issue / Declaring Company Address:
Intel Corporation
2200 Mission College Blvd.
Santa Clara, CA 95054-1549
USA
Representative in European Union
Intel Corporation (UK) Ltd
Pipers Way
Swindon, Wiltshire SN3 1RJ
United Kingdom
Tri Than is the Manufacturer’s Representative, with the
authority of Intel Corporation management to make this
Declaration.
Date of Issue: 07 November, 2013
Copies of this Declaration of Conformity may be downloaded at: http://developer.intel.com/design/litcentr/ce_docs/index.htm

Summary of content (1 pages)