Intel® Desktop Board DX79SI Product Guide Order Number: G43991-002
Revision History Revision -001 -002 Revision History First release of the Intel® Desktop Board DX79SI Product Guide Second release of the Intel® Desktop Board DX79SI Product Guide Date October 2011 March 2012 Disclaimer INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
Preface This Product Guide gives information about board layout, component installation, BIOS update, and regulatory requirements for Intel® Desktop Board DX79SI. Intended Audience The Product Guide is intended for technically qualified personnel. It is not intended for general audiences. Use Only for Intended Applications All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.
Intel Desktop Board DX79SI Product Guide Terminology The table below gives descriptions of some common terms used in the product guide.
Contents 1 Desktop Board Features Supported Operating Systems..............................................................................11 Desktop Board Components.................................................................................12 Processor ..........................................................................................................14 System Memory .................................................................................................15 Memory Configurations........
Intel Desktop Board DX79SI Product Guide Bluetooth*/WiFi Module ......................................................................................30 Bluetooth Technology ..................................................................................30 WiFi (802.11 Wireless) Technology................................................................31 Remote Thermal Probe .......................................................................................
Contents 4 Configuring for RAID Using Intel® Rapid Storage Technology Configuring the BIOS ..................................................................................71 Creating Your RAID Set ...............................................................................71 Loading the Intel RST RAID Drivers and Software (Required for Microsoft Windows XP Installation) ..........................................................72 Setting Up a “RAID Ready” System .......................................
Intel Desktop Board DX79SI Product Guide 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. Removing a PCI Express x16 Card ..................................................................46 Installing Linked PCI Express Graphics Cards ....................................................47 Connecting the Serial ATA Cables....................................................................48 Internal Headers ..........................................................................................
1 Desktop Board Features This chapter briefly describes the features of Intel® Desktop Board DX79SI. Table 1 summarizes the major features of the Desktop Board. Table 1. Feature Summary Form Factor ATX (304.80 millimeters [12.00 inches] x 243.84 millimeters [9.60 inches]) Processor Support for Intel® Core™ i7 and Intel® Xeon® processors in the LGA2011 package with: • Two PCI Express 3.0 x16 graphics interfaces (x16 electrical) • One PCI Express 3.
Intel Desktop Board DX79SI Product Guide Table 1. Feature Summary (continued) Peripheral Interfaces • Four USB 3.0 ports: ― Two ports routed to the back panel ― Two ports routed to an onboard connector • Fourteen USB 2.0 ports: ― Six ports routed to the back panel ― Eight ports routed to four onboard USB headers • Two IEEE 1394a ports: ― One port routed to the back panel ― One port routed to an IEEE 1394a header • Six Serial ATA (SATA) channels through the Intel X79 PCH: ― Two onboard 6.
Desktop Board Features Supported Operating Systems The Desktop Board provides full support for the following operating systems: • • • • • • • • Microsoft Microsoft Microsoft Microsoft Microsoft Microsoft Microsoft Microsoft Windows* 7 Ultimate (64-bit and 32-bit editions) Windows 7 Professional (64-bit and 32-bit editions) Windows 7 Home Premium (64-bit and 32-bit editions) Windows 7 Starter (64-bit and 32-bit editions) Windows Vista* Ultimate (64-bit and 32-bit editions) Windows Vista Business (64-bit a
Intel Desktop Board DX79SI Product Guide Desktop Board Components Figure 1 shows the approximate location of the major components on Intel Desktop Board DX79SI. Figure 1.
Desktop Board Features Table 2. Intel Desktop Board DX79SI Components Label Description A Front panel audio header B PCI Express x1 connector C S/PDIF header D PCI Express 3.0 x16 connector (x8 electrical) E Speaker F PCI bus connector G PCI Express 3.0 x16 connector (switchable to x8 electrical) H PCI Express x1 connector I PCI Express 3.
Intel Desktop Board DX79SI Product Guide Table 2. Intel Desktop Board DX79SI Components (continued) NN IEEE 1394a header OO Reset button PP Power button QQ Chassis intrusion header RR Auxiliary chassis fan header SS System initialization/status LEDs Online Support For more information on Intel Desktop Board DX79SI consult the following online resources: • Intel Desktop Board DX79SI http://www.intel.com/products/motherboard/index.htm • Desktop Board Support http://www.intel.
Desktop Board Features System Memory NOTE To be fully compliant with all applicable Intel ® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.
Intel Desktop Board DX79SI Product Guide Memory Configurations The Intel Core i7 and Intel Xeon processors support the following types of memory organization: • Quad-channel (Interleaved) mode. Quad-channel mode offers the highest throughput for real world applications. • Tri-channel (Interleaved) mode. Tri-channel mode is enabled when the installed memory capacities of any three DIMM channels are equal. • Dual-channel (Interleaved) mode.
Desktop Board Features Intel® X79 Express Chipset The Intel X79 Express Chipset consisting of the Intel X79 Platform Controller Hub (PCH) provides interfaces to the processor and the USB, SATA, LAN, PCI, and PCI Express interfaces. The PCH is the centralized controller for the board’s I/O paths. Go to the following link for more information about the Intel X79 Express Chipset: http://developer.intel.com/products/chipsets/index.htm USB Support The Desktop Board supports USB 3.0 and USB 2.0 devices. USB 3.
Intel Desktop Board DX79SI Product Guide Audio Subsystem The onboard audio subsystem consists of the following components: • • Intel X79 Express Chipset RealTek ALC892 codec The subsystem has the following headers and connectors: • • • • Five back panel analog audio connectors Back panel S/PDIF output port (optical) Onboard S/PDIF output header High Definition (HD) Audio front panel header that provides mic in and line out signals for front panel audio connectors The audio subsystem supports the follow
Desktop Board Features Two LEDs are built into each RJ-45 LAN connector located on the back panel (see Figure 3). These LEDs indicate the status of the LAN. Figure 3.
Intel Desktop Board DX79SI Product Guide Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 3.
Desktop Board Features Serial ATA and IDE Auto Configuration If you install a Serial ATA or IDE device (such as a hard drive) in your computer, the auto-configuration utility in the BIOS automatically detects and configures the device for your computer. You do not need to run the BIOS Setup program after installing a Serial ATA or IDE device. You can override the auto-configuration options by specifying manual configuration in the BIOS Setup program.
Intel Desktop Board DX79SI Product Guide NOTE Using the Back to BIOS button does not set the board to the factory BIOS defaults. To restore settings to the factory defaults, use the key once BIOS setup mode is active. Figure 4. Location of the Back to BIOS Button Hardware Management The hardware management features of Intel Desktop Board DX79SI enable the board to be compatible with the Wired for Management (WfM) specification.
Desktop Board Features Power Management Power management is implemented at several levels, including software support through the Advanced Configuration and Power Interface (ACPI) and the following hardware support: • • • • • • • • • Power connectors Fan headers LAN wake capabilities Instantly Available PC technology (Suspend to RAM) +5 V standby power indicator LED Wake from USB Power Management Event signal (PME#) wakeup support WAKE# signal wake-up support Wake from Consumer IR Software Support ACPI A
Intel Desktop Board DX79SI Product Guide The Desktop Board has a 4-pin processor fan header and three 4-pin chassis fan headers. LAN Wake Capabilities CAUTION For LAN wake capabilities, the 5 V standby line for the power supply must be capable of delivering adequate +5 V standby current. Failure to provide adequate standby current when using this feature can damage the power supply. LAN wakeup capabilities enable remote wake-up of the computer through a network.
Desktop Board Features The Desktop Board’s standby power indicator, shown in Figure 5, is lit when there is standby power still present on the board even when the computer appears to be off. For example, when this LED is lit, standby power is still present at the memory module sockets and the PCI bus connectors. Figure 5. Location of the Standby Power Indicator For more information on standby current requirements for the Desktop Board, refer to the Technical Product Specification at http://www.intel.
Intel Desktop Board DX79SI Product Guide PME# Signal Wake-up Support When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S3, S4, or S5 state. WAKE# Signal Wake-up Support When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from an ACPI S3, S4, or S5 state. Wake from Consumer IR Consumer IR device activity wakes the computer from an ACPI S3, S4, or S5 state.
Desktop Board Features Power Switch The power button switch (see Figure 6, A) can be used to turn the desktop board on or off. This power button switch behaves the same as a chassis power switch connected via the front panel header. The onboard power button switch does not remove standby power. To turn off the computer using the onboard power button switch, keep it pressed down for three seconds. Reset Switch The reset button switch (see Figure 6, B) can be used to reset the desktop board.
Intel Desktop Board DX79SI Product Guide System Initialization LEDs At initial power on, these eight diagnostic LEDs are off. When the BIOS starts an activity such as memory initialization, the corresponding LED starts flashing. Once the activity has completed, the LED will remain on. Table 4 lists the LEDs and describes their function. Table 4.
Desktop Board Features Status LEDs The LEDs in Table 5 indicate various board activities and error conditions on the board. Table 5. Status LEDs LED Item/Callout in Figure 7 LED Color HD Activity H Blue This LED blinks to indicate the activity of SATA drives connected to the board. CPU Hot I Red The LED indicates an elevated temperature on the processor that could affect board performance.
Intel Desktop Board DX79SI Product Guide Bluetooth*/WiFi Module An external Bluetooth*/WiFi module is included with Intel Desktop Board DX79SI (see Figure 8). For module installation instructions see “Installing the WiFi/Bluetooth* Module in Your Chassis” on page 64. Figure 8. Bluetooth/WiFi Module Bluetooth Technology The Bluetooth/WiFi module enables the user to connect with a variety of Bluetooth enabled devices.
Desktop Board Features WiFi (802.11 Wireless) Technology The Bluetooth/WiFi Module allows you to connect with a variety of WiFi enabled networks, access points and allows peer to peer connections. Driver support is provided by Microsoft operating systems such as Microsoft Vista and Microsoft Windows 7 with additional support provided by the supplied WiFi driver included on the Intel Express DVD and online. The WiFi module features the following: • • • Ralink WiFi 802.
Intel Desktop Board DX79SI Product Guide 32
2 Installing and Replacing Desktop Board Components This chapter tells you how to: • • • • • • • • • • • • • • Install the I/O shield Install the Desktop Board Install a processor Install memory Install and remove a PCI Express x16 card Connect the Serial ATA cables Connect to the internal headers and connectors Connect to the audio system Connect chassis fan and power supply cables Set the BIOS configuration jumper Clear passwords Replace the battery Install the WiFi/Bluetooth module Connect the Remote Th
Intel Desktop Board DX79SI Product Guide Installation Precautions When you install and test the Intel Desktop Board, observe all warnings and cautions in the installation instructions.
Installing and Replacing Desktop Board Components Installing the I/O Shield The Desktop Board comes with an I/O shield. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Install the I/O shield before installing the Desktop Board in the chassis. Place the shield inside the chassis as shown in Figure 10. Press the shield into place so that it fits tightly and securely.
Intel Desktop Board DX79SI Product Guide Installing the Desktop Board CAUTION Only qualified technical personnel should perform this procedure. Disconnect the computer from its power source before performing the procedures described here. Failure to disconnect the power before you open the computer can result in personal injury or equipment damage. Refer to your chassis manual for instructions on installing and removing the Desktop Board.
Installing and Replacing Desktop Board Components Installing a Processor CAUTION Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 5 on page 25). Failure to do so could damage the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 33. 2.
Intel Desktop Board DX79SI Product Guide 4. Push down on the lever marked “OPEN 1st” (Figure 13, A) to lift the socket load plate as shown. Grasp the load plate and lift up to open it fully (Figure 13, B). Do not touch the socket contacts. Figure 13.
Installing and Replacing Desktop Board Components 5. Remove the processor from it’s packaging and insert in the socket as shown in Figure 14. Make sure the gold-colored triangle indicating pin 1 on the processor aligns with the triangle on the socket (Figure 14, A) before you lower the processor into place. Lower the processor (Figure 14, B) straight down without tilting or sliding it in the socket. Figure 14.
Intel Desktop Board DX79SI Product Guide 7. Close the load plate socket lever labeled lever is latched, the socket lever labeled (Figure 15, A). After the load plate is closed, engage the “CLOSE 1st” (Figure 15, B) under the latch. As the socket socket cover (Figure 15, C) will pop off as shown. Engage the “OPEN 1st” (Figure 15, D) under the latch. Figure 15. Close the Load Plate 8. Pickup the socket cover (Figure 15, C) and remove it from the board.
Installing and Replacing Desktop Board Components Installing a Processor Fan Heat Sink The LGA2011 processor socket has four threaded holes for mounting a processor fan heat sink. Figure 16 shows installation of a typical processor fan heat sink; yours may differ. For detailed instructions on attaching a processor fan heat sink to the Desktop Board, refer to the Intel boxed processor manual, Intel boxed thermal solution manual, or instructions third-party thermal solution providers.
Intel Desktop Board DX79SI Product Guide Installing and Removing Memory Intel Desktop board DX79SI has eight 240-pin DDR3 DIMM sockets arranged in four channels (A, B, C, and D). See Figure 2 for the memory layout. For optimal memory performance: • • Install DIMMs in numerical order (1-8). For dual-, tri-, and quad-channel operation install matched DIMMs of equal speed and size in each channel. • If you are installing four or fewer DIMMs, use the blue sockets.
Installing and Replacing Desktop Board Components Figure 17. Installing a DIMM 4. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. 5. Holding the DIMM by the edges, remove it from its anti-static package. 6. Position the DIMM above the socket. Align the small notch at the bottom edge of the DIMM with the keys in the socket (see inset in Figure 17). 7. Insert the bottom edge of the DIMM into the socket. 8.
Intel Desktop Board DX79SI Product Guide Removing DIMMs To remove a DIMM, follow these steps: 1. 2. 3. 4. 5. Observe the precautions in "Before You Begin" on page 33. Turn off all peripheral devices connected to the computer. Turn off the computer. Remove the AC power cord from the computer. Remove the computer’s cover. Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops out of the socket. 6.
Installing and Replacing Desktop Board Components Figure 18. Installing a PCI Express x16 Card Removing a PCI Express x16 Add-in Card Follow these instructions to remove a PCI Express x16 card from a connector: 1. Observe the precautions in "Before You Begin" on page 33. 2. Remove the screw (Figure 19, A) that secures the card’s metal bracket to the chassis back panel. 3. Push the card ejector lever down using the tip of a pencil or similar tool (Figure 19, B) in the notch.
Intel Desktop Board DX79SI Product Guide Figure 19. Removing a PCI Express x16 Card Installing Linked PCI Express x16 Graphics Cards The Desktop Board supports the use of linked PCI Express x16 graphics cards with Nvidia SLI technology and AMD CrossFire X technology. When installing linked graphics cards in the PCI Express x16 connectors, refer to the card manufacturer’s instructions to determine correct card placement and interconnection.
Installing and Replacing Desktop Board Components To install two linked PCI Express graphics cards: 1. Observe the precautions in "Before You Begin" on page 33. 2. Install the first card in the PCI Express x16 connector as described in “Installing PCI Express x16 Graphics Cards” on page 44. 3.
Intel Desktop Board DX79SI Product Guide Connecting SATA Cables SATA cables support the Serial ATA protocol. Each cable can be used to connect one internal SATA drive to the Desktop Board. The blue connectors support SATA 6 Gb/s and lower transfer rates and the black connectors support SATA 3 Gb/s and lower transfer rates. For correct cable function: 1. Observe the precaution in “Before You Begin” on page 33. 2.
Installing and Replacing Desktop Board Components Connecting to the Internal Headers and Connectors Before connecting cables to any of the internal headers or connectors, observe the precautions in “Before You Begin” on page 33. Figure 22 shows the location of the internal headers on Intel Desktop Board DX79SI. Figure 22.
Intel Desktop Board DX79SI Product Guide Front Panel Audio Header Figure 22, A shows the location of the front panel audio header. Table 6 shows the pin assignments and signal names for the front panel audio header. Table 6. Front Panel Audio Header Signal Names Pin Signal Name Pin Signal Name 1 PORT 1L 2 GND 3 PORT 1R 4 PRESENCE# 5 PORT 2R 6 SENSE1_RETURN 7 SENSE_SEND 8 KEY (no pin) 9 PORT 2L 10 SENSE2_RETURN S/PDIF Header Figure 22, B shows the location of the S/PDIF header.
Installing and Replacing Desktop Board Components IEEE 1394a Header Figure 22, D shows the location of the IEEE 1394a header. Table 9 shows the pin assignments and signal names for the IEEE 1394a header. Table 9. IEEE 1394a Header Signal Names Pin Signal Name Pin Signal Name 1 TPA1+ 2 TPA1- 3 Ground 4 Ground 5 TPA2+ 6 TPA2- 7 +12 V 8 +12 V 9 Key (no pin) 10 Ground USB 3.0 Connector Figure 22, E shows the location of the USB 3.0 connector.
Intel Desktop Board DX79SI Product Guide Consumer IR (CIR) Headers The Desktop Board has two CIR headers: the input or receiver header (Figure 22, H) and the output or emitter header (Figure 22, F). The receiver header consists of a filtered translated infrared input compliant with Microsoft CIR specifications and a “learning” infrared input. The learning input is a high-pass input which the computer can use to “learn” to speak the infrared communication language of other user remotes.
Installing and Replacing Desktop Board Components USB 2.0 Headers Figure 22, G shows the location of the USB 2.0 headers. Table 13 shows the pin assignments and signal names for each USB 2.0 header. Each USB header can be used to connect two USB devices. Table 13. USB 2.
Intel Desktop Board DX79SI Product Guide Alternate Front Panel Power LED Header Figure 22, J shows the location of the alternate front panel power LED header. Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. If your chassis has a three-pin power LED cable, connect it to this header. Table 15 shows the pin assignments and signal names for the alternate front panel power LED header. Table 15.
Installing and Replacing Desktop Board Components NOTE The back panel line out connector is designed to power either headphones or amplified speakers only. Poor audio quality may occur if passive (non-amplified) speakers are connected to this output. Connecting Chassis Fan and Power Supply Cables Connecting Chassis Fan Cables Connect chassis fan cables to the chassis fan headers on the Desktop Board. Figure 24 shows the location of the chassis fan headers. The board supports 4-wire and 3-wire fans.
Intel Desktop Board DX79SI Product Guide Connecting Power Supply Cables Figure 25 shows the location of the power connectors. CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V (Figure 25, A) power connector to the Desktop Board may result in damage to the board or the system may not function properly. The 2 x 12 pin main power connector (Figure 25, B) is backwards compatible with ATX12V power supplies with 2 x 10 connectors. Figure 25. Connecting Power Supply Cables 1.
Installing and Replacing Desktop Board Components Setting the BIOS Configuration Jumper NOTE Always turn off the power to the computer before moving the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 26 shows the location of the Desktop Board’s BIOS configuration jumper block. Figure 26. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in the BIOS Setup program.
Intel Desktop Board DX79SI Product Guide Table 16. Jumper Settings for the BIOS Setup Program Modes Mode Description Normal (default) (1-2) The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords. Recovery (None) The BIOS recovers data in the event of a failed BIOS update.
Installing and Replacing Desktop Board Components Replacing the Battery A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
Intel Desktop Board DX79SI Product Guide VORSICHT Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. AVVERTIMENTO Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto. Utilizzare solo pile uguali o di tipo equivalente a quelle consigliate dal produttore.
Installing and Replacing Desktop Board Components Προσοχή Υπάρχει κίνδυνος για έκρηξη σε περίπτωση που η μπαταρία αντικατασταθεί από μία λανθασμένου τύπου. Οι μπαταρίες θα πρέπει να ανακυκλώνονται όταν κάτι τέτοιο είναι δυνατό. Η απόρριψη των χρησιμοποιημένων μπαταριών πρέπει να γίνεται σύμφωνα με τους κατά τόπο περιβαλλοντικούς κανονισμούς. VIGYÁZAT Ha a telepet nem a megfelelő típusú telepre cseréli, az felrobbanhat. A telepeket lehetőség szerint újra kell hasznosítani.
Intel Desktop Board DX79SI Product Guide POZOR Zamenjava baterije z baterijo drugačnega tipa lahko povzroči eksplozijo. Če je mogoče, baterije reciklirajte. Rabljene baterije zavrzite v skladu z lokalnimi okoljevarstvenimi predpisi. . UYARI Yanlış türde pil takıldığında patlama riski vardır. Piller mümkün olduğunda geri dönüştürülmelidir. Kullanılmış piller, yerel çevre yasalarına uygun olarak atılmalıdır. OСТОРОГА Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху.
Installing and Replacing Desktop Board Components To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 33). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 27). 5.
Intel Desktop Board DX79SI Product Guide Installing the WiFi/Bluetooth* Module in Your Chassis Installing the WiFi/Bluetooth module that is shipped with Intel Desktop Board DX79SI in your desktop system allows you to connect to wireless networks and Bluetooth peripherals. The recommended installation procedure for a typical desktop chassis is as follows: 1. Observe the precautions in "Before You Begin" on page 33. 2. Make sure that the system is turned off and disconnected from its power source. 3.
Installing and Replacing Desktop Board Components Connecting the Remote Thermal Probe A Remote Thermal Probe is included with Intel Desktop Board DX79SI. You can use the Remote Thermal Probe to monitor the temperature at various locations on the board. Connect the thermal probe as follows: 1. Observe the precautions in "Before You Begin" on page 33. 2. Make sure that the system is turned off and disconnected from its power source. 3.
Intel Desktop Board DX79SI Product Guide 66
3 Updating the BIOS The BIOS Setup program can be used to view and change the BIOS settings for the computer. You can access the BIOS Setup program by pressing the F2 key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. This chapter tells you how to update the BIOS by either using the Intel Express BIOS Update utility or the Intel® Flash Memory Update Utility, and how to recover the BIOS if an update fails.
Intel Desktop Board DX79SI Product Guide Updating the BIOS Using the F7 Function Key To use this BIOS update method: 1. 2. 3. 4. 5. Download and save the Recovery BIOS (.BIO) file to a temporary directory. Copy the .BIO file to a USB thumb drive. Plug the thumb drive into a USB port of the target computer. Shut down the target computer. Enable the F7 prompt display: a. Power the computer on. b. Enter the BIOS Setup by pressing the F2 key during boot. c. Go to the Advanced > Boot Configuration menu. d.
Updating the BIOS NOTE Review the instructions distributed with the update utility before attempting a BIOS update. CAUTION Do not interrupt the process or the system may not function properly. 1. Uncompress the BIOS update file and copy the .BIO file, IFLASH2.EXE, and .ITK file (optional) to a bootable USB flash drive or other bootable USB media. 2. Configure the BIOS or use the F10 key option during POST to boot to the USB device. 3. Manually run the IFLASH2.
Intel Desktop Board DX79SI Product Guide 70
4 Configuring for RAID Using Intel® Rapid Storage Technology NOTE Intel RST requires a Microsoft Windows 7, Microsoft Windows Vista, or Microsoft Windows XP operating system and SATA hard drives. This section describes how to: • • • • Configure the BIOS for RAID Create a RAID Set Load the Intel RST RAID Drivers and Software (required for Microsoft Windows XP installation only) Create a “RAID Ready System” Configuring the BIOS 1.
Intel Desktop Board DX79SI Product Guide 7. Finally, press to Create Volume. 8. Exit the Option ROM user interface by pressing or going to the EXIT option in the MAIN MENU. Loading the Intel RST RAID Drivers and Software (Required for Microsoft Windows XP Installation) 1. Begin Windows Setup by booting from the Windows installation CD. 2. At the beginning of Windows Setup, press to install a third-party SCSI or RAID driver.
A Error Messages and Indicators Intel Desktop Board DX79SI reports POST errors in three ways: • • • By sounding a beep code and blinking the front panel power LED By displaying an error message on the monitor By displaying diagnostic progress codes (POST codes) BIOS Error Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s speaker to beep and the front panel power LED to blink an error message indicating the problem (see Table 17). Table 17.
Intel Desktop Board DX79SI Product Guide BIOS Error Messages When a recoverable error occurs during the POST, the BIOS displays an error message describing the problem. Table 19 gives an explanation of the BIOS error messages. Table 19. BIOS Error Messages 74 Error Message Explanation PROCESSOR_THERMAL_TRIP_ERROR Processor was previously shutdown due to a thermal event (overheating). CMOS_BATTERY_ERROR The firmware has detected that a CMOS battery failure occurred.
Error Messages and Indicators Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h and displayed on the Desktop Board’s seven-segment LED display shown in Figure 30. This code is useful for determining the point where an error occurred during the POST. Figure 30.
Intel Desktop Board DX79SI Product Guide Table 20 lists the Port 80h POST codes in hexadecimal notation. Table 20.
Error Messages and Indicators Table 20.
Intel Desktop Board DX79SI Product Guide 78
B Regulatory Compliance This appendix contains the following regulatory compliance information for Intel Desktop Board DX79SI: • • • • • Safety standards European Union Declaration of Conformity statement Product Ecology statements Electromagnetic Compatibility (EMC) regulations Product certifications Safety Standards Intel Desktop Board DX79SI complies with the safety standards stated in Table 21 when correctly installed in a compatible host system. Table 21.
Intel Desktop Board DX79SI Product Guide European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DX79SI is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directives 2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC (ROHS Directive).
Regulatory Compliance Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej 2004/108/EC, 206/95/EC i 2002/95/EC. Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC, 2006/95/EC & 2002/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC, 2006/95/EC a 2002/95/EC.
Intel Desktop Board DX79SI Product Guide Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das Intel Produkt-Recyclingprogramm implementiert, das Einzelhandelskunden von Intel Markenprodukten ermöglicht, gebrauchte Produkte an ausgewählte Standorte für ordnungsgemäßes Recycling zurückzugeben. Details zu diesem Programm, einschließlich der darin eingeschlossenen Produkte, verfügbaren Standorte, Versandanweisungen, Bedingungen usw., finden Sie auf der http://intel.
Regulatory Compliance Portuguese Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o Programa de Reciclagem de Produtos para que os consumidores finais possam enviar produtos Intel usados para locais selecionados, onde esses produtos são reciclados de maneira adequada. Consulte o site http://intel.
Intel Desktop Board DX79SI Product Guide China RoHS Intel Desktop Board DX79SI is a China RoHS-compliant product. The China Ministry of Information Industry (MII) stipulates that a material Self Declaration Table (SDT) must be included in a product’s user documentation. The SDT for Intel Desktop Board DX79SI is shown in Figure 31. Figure 31.
Regulatory Compliance EMC Regulations Intel Desktop Board DX79SI complies with the EMC regulations stated in Table 22 when correctly installed in a compatible host system. Table 22. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Interference-Causing Equipment Standard, Digital Apparatus.
Intel Desktop Board DX79SI Product Guide radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.
Regulatory Compliance Korea Class B Statement Korea Class B Statement translation: This equipment is for home use, and has acquired electromagnetic conformity registration, so it can be used not only in residential areas, but also other areas. Ensure Electromagnetic Compatibility (EMC) Compliance Before computer integration, make sure that the power supply and other modules or peripherals, as applicable, have passed Class B EMC testing and are marked accordingly.
Intel Desktop Board DX79SI Product Guide Product Certifications Board-Level Certifications Intel Desktop Board DX79SI has the regulatory compliance marks shown in Table 23. Table 23. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. CE mark.
Regulatory Compliance Chassis- and Component-Level Certifications Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring, and cables; are components certified for the country or market where used. Agency certification marks on the product are proof of certification. Typical product certifications include: In Europe The CE mark indicates compliance with all applicable European requirements.
Intel Desktop Board DX79SI Product Guide 90