User's Manual

User Interface StorView* Enclosure Management Software User Guide
Revision 1.1
8
2.8 Network Settings
Each network port in the system is given an entry:
The Current Settings shows configuration and status data for the network port.
The IP Settings section allows configuration of the port's network settings:
• DHCP - If checked, the port will use Dynamic Host Resolution Protocol to receive network
information from a central DHCP server. The IP Address, Netmask and Default Gateway fields
will be grayed out.
• IP Address - The IP address of the port in dotted decimal format (for example, 10.0.7.18).
• Netmask - The subnet mask in dotted decimal format (for example, 255.255.240.0).
• Default Gateway - The IP address of the gateway used to access the internet, in dotted decimal
format (for example, 10.0.0.1).
• DNS Servers - Click the Details button to display a window in which the primary and secondary
Domain Name Server addresses can be specified, in dotted decimal format (for example,
10.0.0.100).
Click Apply Settings to change any of these networking parameters.
In the Operations pane, click Disable Port to stop all traffic to and from the port. The Enabled
parameter in the Current Settings pane will now show "false" instead of "true" and the button will
be re-labelled Enable Port. Click again to re-enable the port.