User's Manual

StorView* Enclosure Management Software User Guide Hardware Specific Information
Revision 1.1
17
With Mute ON and Remind OFF, the buzzer will never sound, no matter what notification
occurs.
With Mute and Remind ON, the buzzer will sound for 0.5 seconds every 32 seconds if any
notification occurs.
The following table shows the meaning of various LED and buzzer combinations, and what
action is required as a result:
Object State Related Meaning Required Action
Chassis Fault
Light
Off - No warnings or
more serious
errors.
None - All OK.
Slow blink
(0.5s on,
3.5s off).
Slow beep (half
second beep
every 8s). No
Fan/drive lights lit
constant.
No beep if
muted.
Warning state –
usually
approaching
temperature
threshold.
Check ambient
temperature and
increase if too cold or
decrease if too hot. If
this does not work check
for fan failure that has a
broken light too.
Slow beep. Fan
light constant. No
beep if muted.
Fan broken or out
of tolerance.
Replace lit fan.
Slow beep. Drive
light constant. No
beep if muted.
Drive fault Replace drive.
Fast Blink
(alternating
every 0.5s).
Faster beep
(1.5s beep, 0.5 s
silence). No fan
lights constant.
No beep if
muted.
Critical state –
usually temperature
near edge of
operating realm.
Check ambient
temperature and
increase if too cold or
decrease if too hot
immediately. If this does
not work check for fan
failure that has a broken
light too.
Faster beep,
more than one
fan light on or a
single PSU fan
light on. No beep
if muted.
Fans broken or out
of tolerance.
Replace Fans
immediately.
Constant on Constant, but
with no fan lights
on constantly.
Failure State –
temperature in
range where
damage could
occur.
Check ambient
temperature and
increase if too cold or
decrease if too hot
immediately. If this does
not work check for fan
failure that has a broken
light too.
Constant, with
multiple fan lights
on constantly.
Fans broken or out
of tolerance.
Replace Fans
immediately. Decrease
ambient temperature.
Object State Related Meaning Required Action