Network Card User Manual

MPCMM0001 Chassis Management Module Software Technical Product Specification 91
The Command Line Interface (CLI)
AdminState
Used to set or query the
adminstrative state of the PMS
as a whole or an individual
monitored process. A target of
“PmsGlobal” will get/set the
state of the PMS as a whole. A
target of “PmsProc[#]” will get/
set the unique state of an
individual process, where # is
the unique process number for
the process. A target of
"PmsPie[#]" will get/set the
unique state of an PIE, where
# is the unique pie number.
AdminState is CMM-specific
and is not synced between
CMMs. It allows individual
control of each CMMs
adminstate and can be set on
either active or standby CMM.
Both "1:Unlocked" or "2:Locked"
1 = Unlocked
2 = Locked
RecoveryAction
Used to set or query the
recovery action of a PMS
monitored process. This is
only valid for a target of
"PmsProc[#]. Where "#" is the
unique number for the
process.
Both
"1:No Action", "2:Process Restart", "3:
Failover and Restart", or "4:Failover
and Reboot"
1 = No Action
2 = Process Restart
3 = Failover and
Restart
4 = Failover and
Reboot
EscalationAction
Used to set or query the
process restart escalation
action. This is only valid for a
target of "PmsProc[#]. Where
"#" is the unique number for
the process.
Both "1:No Action", "2:Failover and Reboot"
1 = No Action
2 = Failover and
Reboot
ProcessName
Used to query the process
name and associated
command line arguments for a
monitored process. A target of
"PmsProc[#]” will retrieve the
name of an individual process,
where "#" is the unique
number for the process.
"PmsPie[#]" will retrieve
the path and command line
arguments, of the PIE to be
executed periodically.
Get
"<Process_Name>
<Command_Line_Arguments>"
N/A
OpState
Used to query the operational
state of a monitored process.
An operational state of
disabled indicates that the
process has failed and cannot
be recovered. This is valid for
a target of "PmsProc[#]” and
“PmsGlobal”, where "#" is the
unique number for the
process, and PmsGlobal
refers to the OpState for all of
PMS. This is also valid for a
target of Pie[#].
Get "1:Enabled", "2:Disabled" N/A
Table 27. Dataitem Keywords for Cmm Location (Sheet 6 of 7)
dataitem Description
Get/
Set
CLI Get Output Valid Set Values