Declaration of Conformity

IDoC template rev. 1904
No.
20110118LJH
Revision 28
Declaration of Conformity
Equipment Type(s):
Solid State Drive (2.5 inch) models –
SSDSA2VP020G2, SSDSA2SV020G2, SSDSA2UP020G3, SSDSA2UP024G3 SSDSA2SH032G1, SSDSA2MH032G1,
SSDSA2MH064G1, SSDSA2SH064G1, SSDSA2MH080G1, SSDSA2SH080G1, SSDA2MH160G1, SSDSA2SH160G1,
SSDSA2M040G2, SSDSA2M080G2, SSDSA2M120G2, SSDSA2M160G2, SSDSA2Q040G2 , SSDSA2J080G2
SSDSA2BT040G3, SSDSA2CT040G3, SSDSA2BW080G3, SSDSA2CW080G3, SSDSA2BW120G3, SSDSA2CW120G3,
SSDSA2BW160G3, SSDSA2CW160G3, SSDSA2BW300G3, SSDSA2CW300G3, SSDSA2BW600G3, SSDSA2CW600G3
SSDSA2BZ100G3,SSDSA2BZ200G3, SSDSA2BZ300G3, SSDSC2BW060A3, SSDSC2BW120A3, SSDSC2BW180A3,
SSDSC2BW240A3, SSDSC2BW480A3, SSDSC2CW060A3, SSDSC2CW120A3, SSDSC2CW180A3, SSDSC2CW240A3,
SSDSC2CW480A3, SSDSA2SH032G2, SSDSA2SH064G2, SSDSA2VP020G3, SSDSA2VP024G3, SSDSC2CT060A3,
SSDSC2CT120A3, SSDSC2CT180A3, SSDSC2CT080A4, SSDSC2CT180A4, SSDSC2CT240A4, SSDSC2CT240A3,
SSDSC2BA100G3, SSDSC2BA200G3, SSDSC2BA400G3, SSDSC2BA800G3, SSDSC2BT080A4, SSDSC2BT180A4,
SSDSC2BT240A4, SSDSC2BB080G4, SSDSC2BB120G4, SSDSC2BB160G4, SSDSC2BB240G4, SSDSC2BB300G4,
SSDSC2BB480G4, SSDSC2BB600G4,SSDSC2BB800G4, SSDSC2BW180A4, SSDSC2BW240A4, SSDSC2BF180A4,
SSDSC2BF240A4, SSDSC2BF120A4, SSDSC2BW120A4,SSDSC2BW080A4, SSDSC2BF080A4, SSDSC2BW360A4,
SSDSC2BF360A4, SSDSC2BW480A4, SSDSC2BF480A4, SSDSC2BP240G4, SSDSC2BP480G4,
SSDSC2MG200G3,SSDSC2MG400G3, SSDSC2MG800G3,SSDSC2BF120A5,SSDSC2BF180A5, SSDSC2BF240A5,
SSDSC2BF360A5, SSDSC2BF480A5, SSDSC2BB800H4,SSDSC2BB480H4,SSDSC2BB300H4,
SSDSC2BB012T4,SSDSC2BB016T4, SSDSC2BG200G4, SSDSC2BG400G4, SSDSC2BG480G4, SSDSC2BG800G4,
SSDSC2BG012T4, SSDSC2BG016T4, SSDSC2BX200G4, SSDSC2BX400G4, SSDSC2BX480G4, SSDSC2BX800G4,
SSDSC2BX012T4, SSDSC2BX016T4
The equipment described above is declared to be in conformity with the following applicable national and international standards. The conformity is valid ONLY when
the equipment is used in a manner consistent with the manufacturer’s recommendations and the reference documents. The spares and accessories listed are for use
with Intel products and are compliant when integrated into the Intel product as a spare or accessory.
Document Reference No.
Title
IEC 60950-1 – 2
nd
Edition Safety of Information Technology Equipment
UL/CSA 60950-1 2
nd
Edition Safety of Information Technology Equipment
EN60950-1:2006 + A11:2009 + A1:2010 +
A12:2011
Safety of Information Technology Equipment
Australian cTick The EMC Framework (Radio communications Act 1992)
CNS 13438:2006 Class B limits Interference-Causing Equipment Standards - Digital Apparatus
Taiwan BSMI CNS14348; CNS14266 Bureau of Standards, Metrology and Inspection, Ministry of Economic Affairs Electromagnetic compatibility
EN55022: 2010 or EN55022:2006 (A1:2007)*
Information Technology Equipment - Radio Disturbance Characteristics
EN55024:2010 or EN55024:1998 (A1:2001 A2:2003)*
Information Technology Equipment - Immunity Characteristics
CISPR 22: 2005 +A1: 2005 +A2: 2006 Class B Information Technology Equipment - Radio Disturbance Characteristics
EN61000-3-2 Information Technology Equipment - Harmonics Characteristics
EN61000-3-3 Information Technology Equipment - Flicker Characteristics
VCCI V-3 / 2011.04 Class B Article 10 Par 4 Optional device Class B ITE
Korean KCC Class B Framework Act on Telecommunications and Radio Waves Act rules effective Jan 24, 2011
EN 50581:2012
Technical documentation for the assessment of electrical and electronic products with respect to the restriction of
hazardous substances
Additional information:
Manufactured in China - See contact information below.
Includes Korea KCC registration under new rules effective Jan 24, 2011
* Models added with this DOC rev: SSDSC2BX200G4, SSDSC2BX400G4, SSDSC2BX480G4, SSDSC2BX800G4,
SSDSC2BX012T4, SSDSC2BX016T4
Regions for which Conformity is Declared
European Economic Area (EEA): Intel Corporation declares the equipment in compliance with the essential requirements of EC Council Directives Low Voltage
Directive (LVD) 2006/95/EC, EMC Directive 2004/108/EC and Directive 2011/65/EU.
USA: Intel Corporation (address below) make this SDoC as Responsible Party for equipment
Canada: Intel Corporation (address below) is the Declaring Party for equipment.
Japan: Voluntary Control for Interference by Information Technology Equipment (VCCI) member number 338.
Australia / New Zealand: Supplier Code N-232 [Intel Australia Pty Ltd, 111 Pacific Highway, North Sydney, NSW 2060] : ABN 59 001 798 214 : ACN: 001 798 214 .
Any other region where the regulatory requirements are satisfied by compliance to the standards declared above.
This Declaration of Conformity is issued by
Intel Corporation
, which is solely responsible for the declared compliance.
Place of Issue / Declaring Company Address:
Senior Product Regulations Engineer
Intel Corporation For Single Point of Contact of EU Only
2200 Mission College Blvd. Intel Corporation (UK) Ltd., Attn: Corp Quality
Santa Clara, CA 95054-1549 Pipers Way, Swindon, Wiltshire SN3 1RJ, UK
USA
TEL: [phone]
FAX: [phone]
Name: John Gustavson is the Manufacturer’s Representative, with the
authority of Intel Corporation management to make this Declaration.
Date of signature and Issue: November 11, 2014